Orbital Shakers
Bellco Glass, Inc. Orbital Shaker Complete, 230V-51X51
The Bellco Benchtop Orbital Shakers are ideal for staining and washingelectrophoresis gels or for any applications requiring mixing or agitationof solutions. They are engineered to operate between the limits of 30 andapproximately 350 revolutions per minute, and to hold their speed at anyselected setting to approximately plus or minus five percent.. MADE IN THE USA--Speed range: 30 - 350 rpm +/- 5%--Circular orbit: 2.5 cm (1" ) orbit--Load: 11 kg (25 lbs) maximum--Weight: 7.6 kg (17 lbs)--7744-01010, 7744-10220 & 7744-01100 units have a platform deck of 25 x 25 cm--7744-02020, 7744-20220 & 7744-02200 units have a platform deck 50 x 50 cm
Sigma Aldrich Fine Chemicals Biosciences Orbi ShakerTM MP with 4 po1EA
The Benchmark Scientific Orbi-Shaker MP is designed with a 3mm mixing orbit optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use springs clamps or tools.A digital microprocessor ensures accurate speed control over the brushless maintenance free motor drive and both speed and time can be viewed simultaneously on the large LED display.
Research Products International Corp Mini Mixer 3D Shaker with Dimpled Mat for 1.5ml to 50ml Tubes, 10.5 x 7.5 Inches, 230 Volt Model for Foreign Countries
The MiniMixer combines the motions of an orbital and rocking shaker to produce a three dimensional and "nutating" gyration. Provides a gentle, thorough action without causing foaming. Ideal for re-suspending fragile DNA fragments and mixing of biological samples.
Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2 kilograms and are safe for use in cold rooms and incubators.
This mixer has an ambient operating range of +4°C up to 65°C allowing use in a cold room or incubator. Supplied with a dimpled rubber mat that holds tubes firmly in place. Accommodates variety of sample tube sizes from 1.5 ml up to 50ml.
Bellco Glass, Inc. Orbital Shaker,12V/230V With 10x10 Tray
The Bellco btbTM12 Volt Orbital Shaker is a compact unit designed for continuous duty shaking using intrinsically safe low voltage electronics. The one-inch orbital motion provides even mixing. The rubber suction cup feet keep the unit firmly attached to surface. Counterbalanced drive shafts for precise orbital motion. Includes 25x25cm (10x10" ) tray. Dims: 11x11x5" (28x28x14cm) . MADE IN THE USA
Bellco Glass, Inc. H.D. Recprocating Shaker Complete, 115V With 16 Sq Tray& Liner"
The unit is a laboratory shaker with a reciprocating stroke adjustable for 1”, 1 ¾” & 2 ½”. It is designed to shake clear plastic culture bags with working volumes between 5 & 10 liters, as well as function as a general purpose laboratory shaker. The unit incorporates a digital speed control and 50W brushless DC motor and runs on plastic raceways for minimal noise. Speed is controlled with a numbered dial located on the front of the unit and ranges from 5 to 150 cycles/min approximately. Units are powered by standard 24V in-line power supplies and are CE compliant. The OptimaTM bag trays are sold separately. MADE IN THE USA
Sigma Aldrich Fine Chemicals Biosciences Orbi ShakerTM CO2 XL orbit1EA
The Orbi-Shaker CO2 XL is designed for shaking mixing and aeration applications in extreme environments including CO2 incubators. It can withstand temperatures from 0 to 60C and humidity levels up to 100%. To avoid contamination unintentional release of gas or deviations from protocol all settings are adjusted via the included remote control module.This remote control module can be stored outside of the chamber and connects to the shaker via flat (1 mm thickness) cable that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).The Orbi-Shaker CO2 XL is supplied with a 16 x 16.5 inch non-slip rubber mat platform.
Andwin Scientific VWR MINI SHAKER 15
- Orbital shaking motion
- 15 mm orbit
- Speed range of 40 to 300 rpm
- Speed accuracy of ±2% above 100 rpm
- Digital LED display for speed and time
- Microprocessor control with variable speed
- Timer ranges from 1 second to 160 hours
- Audible timer alarm
- Maintenance-free brushless DC motor
- Triple eccentric drive system with lubricated ball bearings
- Cast aluminum base material
- Maximum load capacity of 3.6 kg
- Operating temperature range from -10 to 40°C
- 120V electrical input, 5 amps, 25 watts, 50/60 Hz
- Platform dimensions of 29.9 x 22.2 cm
- Unit weight of 10.7 kg
- Overall dimensions approximately 27.9 x 43.2 x 10.2 cm
- 2-year limited warranty on parts and labor
- Includes safety features such as ramping function, overload protection
- Suitable for cold rooms, incubators, and CO2 incubators
Electron Microscopy Sciences Multi-Microplate Genie, British Plug, 230 V
The Microplate mixer has high speed action for increased mixing of up to 4 microplates (8 with optional accessory tray). Heat will not be transferred to your microplates. The fan (located in the bottom of the unit) directs air downward and out of the unit. As a result, room air is constantly drawn into the unit underneath the tray that holds the microplates, insuring that samples will not be heated.
Features aggressive mixing speed from 750-3200 RPM for complete and uniform mixing in any microplate format.
Small vortexing orbit of 1.0 mm for thorough mixing regardless of sample viscosity.
Speed and orbit combine to offer true vortexing action in each well of a microplate.
Accepts most microplate types
Built-in timer operates from 1 - 60 minutes or continuous for hands-free use.
May be used in cold rooms and incubators for temperature sensitive applications.
Research Products International Corp Silicone Mat, Adhering for Mini-300 Orbital Genie
Silicone Mat, Adhering for Mini-300 Orbital Genie
Bellco Glass, Inc. Mini Orbital Shaker Complete, 115V W/8 Pos Tray
The Bellco Benchtop Mini Orbital Shakers are ideal for both rigid polystyrene and flexible polyvinyl 96-well micro tube plates commonly used in cell culture, virology, immunology and serology. They are engineered to operate between thespeed range of 50 to 1550 rpm and have a 100 second timer for reproducing mixing times or can be used in continuous operation. The true orbital motion results in increased mixture homogeneity compared with oscillating or vibrating shakers. The cast iron ballast eliminates walking of unit and handles allow easy movement within the laboratory.. MADE IN THE USA
Thomas Scientific Orbi-Shaker CO2 XL Orbital Shaker with flat mat platform (16 x 16.5"), 115V
Designed to fit and maximize capacity in most CO2 incubators Remote controlled, adjust settings without disrupting the CO2 environment Horizontally circular 19mm orbit for aeration & mixing Instantly exchange flask clamps with MAGic Clamp™ accessories (PATENTED) Full color TOUCH screen control panel The Orbi-Shaker CO2 is designed for shaking, mixing and aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber door(s). The instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp™ platforms (of multiple sizes) are also available for use with Erlenmeyer fla
Biotang Inc Digital Linear Shaker is a powerful variable speed shaker which provides efficient linear motion. max shaking weight of 7.5kg, 9 type of platforms selective for flasks, .PC control via RS232 interface, available to control all measurement
Digital Linear Shaker is a powerful variable speed shaker which provides efficient linear motion. max shaking weight of 7.5kg, 9 type of platforms selective for flasks, .PC control via RS232 interface, available to control all measurement
Grainger Shaker Orbital 30 to 300 rpm 3 x13 x11
The Benchmark Scientific Orbital Shaker is a compact and quiet orbital shaker designed for mixing small samples in the lab. It has a low-profile design and features a universal platform that accommodates a variety of vessels. The speed is adjustable from 30 to 300rpm with a large easy-to-read LED display. This shaker has a lightweight composite housing for stability and quiet operation. It provides uniform orbital shaking motion for applications like staining, washing, mixing, and more. The shaker measures 14.2"W x 14.2"D x 3.5"H and comes with a 3-year warranty.
Andwin Scientific SHAKER 3500 STANDARD 120V
The Standard Orbital Shaker can be utilized for several purposes, such as cell cultures that require accurate and reproducible results. This product has a capacity of 15.9 kilograms or 35 pounds. It can generate reproducible movement that is uniforml