Stirrer Accessories
Sigma Aldrich Fine Chemicals Biosciences PTfE screw propeller stirr1EA
Guaranteed chemically resistant inert and leak-freeUse up to 280C (540f)Encapsulated stainless steel core for maximum rigidityPlease note The propeller and shaft are fused together.
Grainger Paddle Gasket 1-1/2 In PTFE w/304SS Wht
The Grainger 16T710 Paddle Gasket is made of PTFE and has an operating temperature range of -450°F to 500°F. It has a maximum pressure rating of 1000 psi and a maximum speed rating of 25 ft/sec. The gasket has a 1-1/2" shaft diameter and is 1/16" thick. It comes in a package of 10 gaskets. The Grainger 16T710 is designed for use as a replacement gasket in mixers, blenders, and other processing equipment to prevent leakage around shafts.
Chemglass Life Sciences Agitator, PTFE, Four Blade, 9in Diameter, Fits 25.4mm Shaft Size, 45° Impeller Angle
Agitator, PTFE, Four Blade, 9in Diameter, Fits 25.4mm Shaft Size, 45¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 25.4mm OD stirrer shaft CG-2097 and have 45¿ impeller angles. The 45¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Cole-Parmer IKA 1296000 Propeller Stirrer, 3-Bladed, 13.75" (350 mm) Shaft
A variety of propellers, paddles, clamps, and stands are available.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 20000mL Flasks, 55/50 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 22000mL Flasks, 55/50 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences 3mm Diameter Pin, Glass Filled PTFE
3mm Diameter Pin, Glass Filled PTFE. Replacement part for CG2096 series of High Viscosity Agitators. High viscosity agitator, made entirely of PTFE and glass filled PTFE, provides excellent stirring at the bottom of 2L through 20L reactors, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a glass filled PTFE safety pin. Heavy duty blades are 7mm thick. Supplied complete with one glass filled PTFE safety pin.
Arrow Engineering Type 316 Stainless Steel Propeller 2-1/2"dia. 4 Blade
The Arrow Mixing Products Type 316 Stainless Steel 2-1/2″ 4 blade propeller with 5/16-24 tapped hole. Our stainless propeller selection is engineered for optimal performance, ensuring smooth and consistent mixing for various industries, including pharmaceuticals, food processing, and chemical production. With a carefully crafted design, these propellers maximize power and efficiency, helping you achieve the best results for your mixing needs.
Chemglass Life Sciences 10" Diameter Lower Agitator, PTFE, with Stabilizing Bushing, Improved
10" Diameter Lower Agitator, 30mm Shaft, PTFE, with Stabilizing Bushing, Improved
Bellco Glass, Inc. Glass Ball Impeller Only,3L
Description: Glass Ball Impeller Assembly Only. MADE IN THE USASize: 3000mLScrew Cap: Blue PP, 100mm OD x 22.4mm TCap Seal: Teflon, 95.3mm OD x 10.4mm TSealing Ring: Blue silicone rubber, 91.4mm OD x 76.2mm ID x 6.1mm TFlex Tube: Soft silicone, 76.2mm OAL, 0.312” OD x 0.248” IDMagnet Tube: Type 1 Class A Borosilicate Glass, 216mm OAL, 34mm OD ball, houses one cast alnico magnet
Cole-Parmer Lightnin 829448 316 SS four-blade impeller ( A-200), 2.0" dia x 5/16" bore dia
Four-blade impellers are turbine impellers that have a 45 degree pitch and produce a semi-axial flow