Stirrer Accessories
Chemglass Life Sciences 19mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 45/50 Joint Size
19mm Chem-Vac Stirrer Bearing, PEEK/PTFE Stabilizer, PTFE, 45/50 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Getinge USA MOD BALL BEARING STIRRER 1-7L
This item has a minimum qty of 3 per supplier requirements.
MOD BALL BEARING STIRRER 1-7L
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 5L-20L Flasks, 605mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 5L-22L Flasks, 605mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
MSC Albion Caster Wheel, Semi-Steel, 8 inch Diameter, 2 inch Wide, Roller Bearing
This caster wheel is designed for general-purpose mobility in various industrial and commercial settings. It features durable semi-steel construction and an 8-inch diameter, 2-inch width, and a roller bearing for efficient and smooth operation.
- Semi-steel construction for enhanced durability
- 8 inch diameter for versatile applications
- 2 inch width for stable movement
- 1/2 inch axle bore for secure fitting
- Roller bearing ensures smooth and easy rotation
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 5L-20L Flasks, 613mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 5L-22L Flasks, 613mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Chemglass Life Sciences 31mm Rotary Bearing Rebuild Kit with Tools
Repair kits for Chemglass CG-2077-M series mechanical seal stir bearings. Kits are available with or without tools. Each bearing repair requires a small amount of Krytox grease CG-GPL-205-01 which is purchased separately.Kits with tools include:Adjustable Pin Spanner WrenchRetaining Ring PliersBearing SealBall bearingsNeedle Roller BearingsKits without tools include:Bearing SealBall bearingsNeedle Roller BearingsItems Needed for Rebuild:Appropriately Sized Rebuild KitSpanner WrenchesHydraulic or Arbor PressClean RagsMeans of Vacuum TestingKrytox Oil & GreaseFine Scotch-brite
Chemglass Life Sciences Stirrer Blade, PTFE, 19mm, Heavy Duty, for 1000mL Flasks, 35mm Width x 74mm Length, 45/50 minimum joint clearance
Stirrer Blade, PTFE, 19mm, Heavy Duty, for 1000mL Flasks, 35mm Width x 74mm Length, 45/50 minimum joint clearance. Stirrer blade made of 3/16" thick solid PTFE for use with both Chem-Stir™ and button style stirring shafts having a 19mm OD.
Arrow Engineering S-316-12 Type 316 Stainless Steel 12" Propeller Shaft
All Arrow Mixing Products' stainless steel mixer shafts are 3/8" dia. & made of 316 stainless steel. These quality mixer parts have a 5/16-24 external thread for easy assembly with all of our stainless steel propellers and couplings. (Note: propeller and coupling sold separately)
