Stirrer Accessories
Ace Glass, Inc. PTFE agitator, (4) 50mm anchor style blades, fits 10mm knob style or drilled shafts
AGITATOR PTFE 10MM 50MM BLADE
Ace Glass, Inc. Stir blade, stainless, 24x115mm, holed, 10mm shaft
Stir blade, stainless, 24x115mm, holed, 10mm shaft
Chemglass Life Sciences 30mm Stirrer Shaft Retainer, Nylon, Safety
30mm Safety Collar, Nylon. Designed to be placed on the stirrer shaft directly above the bearing. The collar provides protection against the stirrer shaft dropping and hitting the bottom of the vessel. The collar also acts as a dust cover and permits the stirrer to be positioned off the bottom of the vessel. Supplied complete with one each CG-2049 PTFE gasket of the corresponding size.
Chemglass Life Sciences Stirrer Bearing, PTFE, Chem-Stir, Complete, 10mm, 24/40 Inner Joint
Stirrer Bearing, PTFE, Chem-Stir, Complete, 10mm, 24/40 Inner Joint. Grease-Free PTFE stirrer bearing designed for use under moderate vacuum applications. The bearing consists of a threaded glass adapter having an inner joint, a set of PTFE washer style bearings, a stainless steel spring, nylon alignment ring and Celcon compression cap. The unique design of this bearing provides hours of continuous vacuum operation, with a minimum of "flaking" of the PTFE bearing surfaces.PLEASE NOTE: FOR USE ONLY WITH CG-2078 OR CG-2079 PRECISION GROUND AND POLISHED STIRRER SHAFTS.
Chemglass Life Sciences Chemglass 29/42 Lower Joint Adapter for 10 mm Stir Shaft - Mechanical seal bearing, 1-3/4 in threaded connection (CG-2077-M-38)
Lower joint adapter for 29/42 ground joints that provides a dry-running mechanical seal for 10 mm stir shafts and a 1-3/4 in threaded connection. Supplied complete with perfluorinated O-rings and a loosening nut, the adapter resists aggressive chemicals while minimizing contamination and allowing vertical adjustment for different agitator styles.
- Provides a vacuum- and pressure-tight seal for 29/42 lower joints.
- Designed for 10 mm stir shafts and 1-3/4 in threaded connections.
- Includes perfluorinated O-rings and a loosening nut for chemical resistance.
- Dry-running mechanical seal rotates with the shaft to prevent contamination.
- Rated to 5 Torr vacuum and 2-3 psi pressure; seals up to 2000 rpm.
- Compatible with glass, metal, or PTFE-covered stir shafts and allows vertical adjustment.
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 525mm OAL, Agitator OD 50mm, for use with 1, 000mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 525mm OAL, Agitator OD 50mm, for use with 1,000mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Chemglass Life Sciences Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 525mm OAL, Agitator OD 66mm, for use with 1, 000mL Reactors
Stirring Shaft, 10mm, Clockwise, Polished, Glass Agitator, Three Blade, 525mm OAL, Agitator OD 66mm, for use with 1,000mL Reactors. Shaft is precision ground and polished to fit Chemglass's CG-2077-H, CG-2077-G and CG-2077-U style 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120 apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR CLOCKWISE ROTATION.
Chemglass Life Sciences Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 1000mL Flasks, 34/45 minimum joint clearance
Stirrer Blade, PTFE, Banana Shaped, Solid, 19mm, Heavy Duty, for 1000mL Flasks, 34/45 minimum joint clearance. Blade is shaped to resemble the contour of a round bottom flask. Made of 3/16" PTFE to fit 19mm OD stirrer shafts. Minimum joint size listed is the size required to allow passage of the blade.
Chemglass Life Sciences 30mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud
30mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless Steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.
Chemglass Life Sciences 13" One-Piece PTFE Lower Agitator, Four Blade, For Use with 30mm Shafts, For use with 400mm ID Flange Reactor
13" One-Piece PTFE Lower Agitator, Four Blade, For Use with 30mm Shafts, For use with 400mm ID Flange Reactor. High viscosity agitator. The body is made entirely from ONE PIECE of CLASS VI VIRGIN PTFE. One-piece machined body is much easier to clean. The smooth machined surface has no seams, joints or crevices for material to collect. The design provides excellent stirring at the bottom of CG-1968-W 400mm ID 100L reactor vessels, especially when heavy slurries are being mixed. Agitator attaches to stir shaft by both a compression fitting and a PTFE safety pin. Heavy duty blades 9mm thick. For use with 30mm CG-2097 stirrer shafts. PLEASE NOTE: THE LOWER AGITATOR HAS BUSHING TO ACCEPT A STABILIZING PIN FROM DRAIN VALVE PLUG. THE PIN EXTENDS INTO THE LOWER AGITATOR AND VIRTUALLY ELIMINATES ANY WHIPPING BY STABILIZING THE STIRRER SHAFT.
Chemglass Life Sciences 3/8" I.D. x 3/8" I.D. Coupling Adapter, Stainless Steel
Coupling Adapter, Stainless Steel . For use primarly with Tru-Stir stirrer shaft couplings.
Chemglass Life Sciences 19mm Rotary Bearing Taper Lock, Ferrule, Nylon
19mm Rotary Bearing Taper Lock, Ferrule, Nylon. Component of CG-2077-M series of mechanical seal stir bearings. Pictured is a fully assembled bearing. Item is ROTARY BEARING TAPER LOCK FERRULE ONLY.
Chemglass Life Sciences 25.4mm Rotary Bearing Taper Lock, Ferrule, Nylon
25.4mm Rotary Bearing Taper Lock, Ferrule, Nylon. Component of CG-2077-M series of mechanical seal stir bearings. Pictured is a fully assembled bearing. Item is ROTARY BEARING TAPER LOCK FERRULE ONLY.
Chemglass Life Sciences 6.35mm Shaft Adapter with Collar
6.35mm Shaft Adapter with Collar. Pictured Is a fully assempled stirrer shaft.