Stirrer Accessories
Chemglass Life Sciences 6mm Micro Stirrer Assembly, Complete with Shaft, Bearing and Blade, 14/20
6mm Micro Stirrer Assembly, Complete with Shaft, Bearing and Blade, 14/20. Micro stirrer has a 6mm OD x 305mm long precision ground button style shaft and a football shaped 11 x 33mm TFE blade. The 11 x 33mm blade can be used in flasks having a capacity of 25mL and above. Complete stirrer assembly consists of a shaft, bearing and blade.
Chemglass Life Sciences 12.7mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Male Coupling, For Use with 3-Jaw Jacobs Chuck
12.7mm Tru-Stir Stirrer Shaft Coupling, 3/8" Upper Male Coupling, For Use with 3-Jaw Jacobs Chuck. The design of our Tru-Stir stirrer shaft coupling eliminates the need to use rubber hose or universal adapters to attach your stirrer shafts to overhead stir motors. Coupling incorporates a unique helical S.S. spring permitting up to 1/4¿ of offset misalignment and 45¿ of angular misalignment. Coupling is rated for 24 in-lbs of torque without the backlash normally associated with common coil springs. Lower portion of coupling has a nylon adapter with a one piece collar for attachment to 12.7mm (OD) stirrer shafts. Upper adapters permit the coupling to be used with a standard Jacobs style 3-jaw chuck. Male Upper Coupling is 3/8". Overall length of the coupling is 4¿. Supplied complete with an allen wrench set.
Chemglass Life Sciences 10mm Stirrer Shaft Coupling, Universal, 1/4" OD Stud
10mm Stirrer Shaft Coupling, Universal, 1/4" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.PLEASE NOTE: OTHER THAN OUR CG-2097 PROCESS REACTOR STIRRER SHAFTS, CHEMGLASS 19MM OD STIRRER SHAFTS HAVE A REDUCED TOP DIAMETER OF 12.7MM. WHEN ORDERING A UNIVERSAL COUPLING FOR A CHEMGLASS 19MM OD STIRRER SHAFT, USE PART NUMBER CG-2046-03.
Chemglass Life Sciences Agitator, PTFE, Four Blade, 8in Diameter, Fits 25.4mm Shaft Size, 60° Impeller Angle
Agitator, PTFE, Four Blade, 8in Diameter, Fits 25.4mm Shaft Size, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 25.4mm OD stirrer shaft CG-2097 and have 60¿ impeller angles. The 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the shaft. Locks onto shaft with a collet hub and nut and has a glass filled PTFE safety screw. PLEASE NOTE: ANGLED IMPELLARS DESIGNED TO STIR UPWARDS IN A CLOCKWISE DIRECTION ARE AVAILABLE. PLEASE CALL FOR PRICING.
Chemglass Life Sciences 10mm Chem-Vac Stirrer Bearing, PTFE, 24/40 Joint Size
10mm Chem-Vac Stirrer Bearing, PTFE, 24/40 Joint Size. Chem-Vac PTFE stirrer bearing provides a VACUUM TIGHT FLAKE-FREE SEAL. Two versions of the bearing are available, the standard series for 2L and smaller vessel capacities and the stabilizer series that incorporates a PEEK/PTFE stabilizing bushing that is molded to the lower portion of the inner joint. The stabilizer greatly reduces stirrer shaft whip on larger vessels. The bearing consists of a PTFE standard taper body, Glass filled polypropylene screw cap, PEEK Compression spring, PEEK/PTFE sleeve and a glass filled polypropylene loosening nut. The polymer blend sleeve provides a long lasting seal for use up to 500 RPM. Loosening nut above the standard taper inner joint allows easy and quick removal. PLEASE NOTE: PTFE STIRRER SHAFTS ARE NOT RECOMMENDED FOR USE WITH THIS BEARING.
Chemglass Life Sciences 10ft Extension Cord, Type "T" (Blue), Standard to Standard Plug
10ft Extension Cord, Type "T" (Blue), Standard to Standard Plug. Coiled extension cords to connect thermocouples to instrumentation such as temperature monitors, controllers and data loggers. Cords are 10ft long and made of 26-gauge multistrand wire with PVC insulation. All cords have a female standard (OST) with a choice of a male standard (OST) or mini (SMP) connection.
World Precision Instrument Ball Bearing Boom Stand
- Dual Arm Ball Bearing construction increases stability and allows smoother horizontal movements.
- Length of arm is 40 cm
- Focus Mount must be purchased separately
World Precision Instrument Ceramic Blades for INTEGRASLICE/CA-5100MZ
Package of 5 ceramic blades for use with the INTEGRASLICE/CA-5100MZ and CA-5100MZ Plus.
Ace Glass, Inc. Agitator, 19mm shaft, PTFE, 200mm removable blades
Agitator, 19mm shaft, PTFE, 200mm removable blades
Chemglass Life Sciences Stirrer Shaft, 6mm OD x 305mm
Stirrer Shaft, 6mm OD x 305mm. Replacement part for CG206001 Micro Stirrer Assembly.
Chemglass Life Sciences 10mm PTFE Washer Set
10mm PTFE Washer Set. 2ea PTFE V-rings, 1ea Split PTFE O-ring. Replacement part for CG2076 series of Stirrer Bearings.