Microcentrifuges
Compact footprint centrifuges used for small sample sizes, such as microtubes. Ideal for microfilter cell separations and HPLC samples. Available as electronic or handheld manual units; may have digital interfaces and refrigeration capabilities.
Microcentrifuges are specifically designed to accommodate tubes that hold less than 5.0 mL. Although benchtop centrifuges can be fitted with rotors for microtubes, microcentrifuges usually have a smaller footprint, which makes for a less-crowded work area.
As with other benchtop centrifuges, these units can be ventilated (operated without temperature controls) or refrigerated. Most are sold with a rotor, although additional alternate rotors may be available.
Sigma Aldrich Fine Chemicals Biosciences Microcentrifuge Tube natur
Microcentrifuge Tubes are certified DNase RNase and Pyrogen free.
Hettich Centrifuges MIKRO 200,(24) 1.5-2.0mL,Package
Hettich MIKRO 200 MICROLITER TUBE PACKAGE 24 BIO-CONTAINMENT, (1) Centrifuge, (1) Fixed-angle Rotor, (24) Adapters 1.5mL, (1) Bio-containment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 185, (12) 1.5-2.0mL,Package
Hettich MIKRO 185 MICROLITER TUBE PACKAGE 12, (1) Centrifuge, (1) Fixed-angle Rotor, (12) Adapters 1.5mL, (1) Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 220R, (24) 1.5-2.0mL,Package
Hettich MIKRO 220R MICROLITER TUBE PACKAGE 24, (1) Centrifuge, (1) Fixed-angle Rotor, (24) Adapters 1.5mL, (1) Biocontainment lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Hettich Centrifuges MIKRO 220, (24) 1.5-2.0mL,Package
Hettich MIKRO 220 MICROLITER TUBE PACKAGE 24, (1) Centrifuge, (1) Fixed-angle Rotor, (24) Adapters 1.5mL, (1) Biocontainment lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
Thomas Scientific MyFuge Mini Centrifuge, green lid 100-240V US Plug
The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples. An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. Clik-N-Lok™ INSTANT rotor attachment Eight position microtube rotor Storage compartment for PCR rotor & 0.5ml adapters Near silent operation Decelerates in just one second Four position PCR strip rotor
Alkali Scientific MyFuge™ 5 Microcentrifuge for 5mL Tubes, 115v
The MyFuge™ 5 Microcentrifuge includes a four position rotor for compatibility with a variety of 5mL test tubes, including 5mL snap cap centrifuge tubes. In addition, this combination rotor has four additional slots for centrifuging standard micro tubes (1.5/2.0mL). Simply close the lid and the centrifuge quickly accelerates to the fixed speed of 5,500rpm. Open the lid, and the rotor decelerates to a stop for removing samples. The 5mL rotor positions accepts 5mL centrifuge tubes (snap cap) directly. While 5mL blood and culture tubes (12x75mm) and cryovials are also accepted with the included adapters. The micro tube positions are also designed to accept 0.5 and 0.2mL tubes with the use of optional adapters, and a PCR rotor is also available for use with eight position PCR strips.
Cole-Parmer Stuart SCF3 Microcentrifuge, 500 to 15,000 rpm; 100 to 240 VAC, 50/60 Hz
This microcentrifuge is small and quiet enough for personal use, but offers advanced features typical of larger benchtop centrifuges. In addition to the user-friendly digital interface, the centrifuge comes with software and a USB cable allowing for remote operation and data acquisition. For safety, the lid remains locked while the rotor is in motion and automatically releases when the rotor comes to a halt. In the event of a power failure, an emergency lid release latch is installed in the base. Program speed or RCF and time, which is saved in onboard memory. Imbalance detection system identifies an asymmetrical load and prevents operation.
Alkali Scientific™ C2248 StripSpin™ 12D Digital Mini Centrifuge w/ PCR Strip Rotor
The new Alkali Scientiifc C2248 StripSpin 12D digital mini centrifuge from Alkali is uniquely designed for centrifugation of 12 position PCR strips. It features digital speed control up to 5,500 rpm, timer control up to 99 min., and a safety interlock to stop the centrifuge if the lid is opened during operation. With built in rcf conversion, speed can be set/displayed in rpm or rcf, the Alkali Scientific™ C2248 StripSpin 12D is the perfect solution for centrifugation of up to 4 x 12-position high efficiency PCR strips (or 48 x 0.2ml tubes) and includes a 2 year warranty.
MSC E.R. Wagner Rigid Top Plate Caster, Thermoplastic Rubber, 6 in Wheel Dia, 1-1/2 in Wheel Width, 280 lb Capacity
This rigid top plate caster features a 6-inch diameter wheel constructed from thermoplastic rubber, providing a 1-1/2 inch width. Designed for durability, it boasts a 280 lb capacity and an overall height of 7-3/8 inches. Its hardened-heat treated construction includes a Delrin bearing and a 3-1/8 x 4-1/8 inch plate size with a nickel finish, making it suitable for hard surfaces.
- NSF type
- Wheel diameter: 6 in
- Wheel material: Thermoplastic rubber
- Wheel width: 1-1/2 in
- Bearing type: Delrin
- Hardened-heat treated construction
- Plate size: 3-1/8 x 4-1/8 in
- Nickel finish/coating
- Load capacity: 280 lb
- Suitable for hard surfaces
- Top plate mount
- Rigid style
- Wheel molded on polypropylene
- Country of origin: United States
Alkali Scientific Chart™ Trifecta Ambient Vaporizers – VAP AMB AL, 15K
The Chart™ Trifecta Ambient Vaporizers are engineered for efficient, reliable vaporization of CO₂ at ambient temperatures. Designed for industrial and commercial applications, these vaporizers deliver consistent gas flow and pressure without the need for external heating, ensuring optimal performance and energy efficiency. Built with durable, corrosion resistant materials, they offer long lasting operation, simplified maintenance, and enhanced safety, making them ideal for demanding environments where dependable CO₂ vaporization is critical. Key Features: Efficient Ambient Vaporization: Delivers consistent CO₂ flow without external heating. Reliable Performance: Maintains stable pressure for industrial and commercial applications. Durable Construction: Corrosion resistant materials ensure long term operation. Energy Efficient Design: Optimizes performance while minimizing energy use. Enhanced Safety: Built in features protect against overpressure and leaks. Low
Med Vet International USA Fecal-Fuge Centrifuge Touch - USA Fecal-Fuge with 6-place HYBRID Rotor, J0501WCCT, Each
USA Fecal-Fuge Combination Centrifuge with Hybrid Rotor 2-place angled & 4-place swing-out combination rotor for: blood, urine, fecals WITH cover slips, plus hematocrits (using the included Crit Carriers in the 2 angled sleeves), touch screen controls
Hettich Centrifuges MIKRO 200,(24) SpinColumn,Package
Hettich MIKRO 200 SPIN COLUMN KIT PACKAGE BIO-CONTAINMENT, (1) Centrifuge, (1) Fixed-angle Rotor, (1) Bio-containment Lid, Power: 100-120 V 1~/50-60Hz, Warranty: Five (5) years
RUDIMENTARY TECHNOLOGIES LLC MICROCENTRIFUGE TUBE COOLING B
NC3401567 MICROCENTRIFUGE TUBE COOLING B