Electron Microscope Specimen Mounts and Holders
Ted Pella Inc 45º SEM Mount, 10/pack
45º SEM Mount Ø12.7mm for FEI, TESCAN, ZEISS (also for Philips, LEO, Cambridge, AMRAY, Leica, CamScan, ETEC) SEMs. Aluminum, grooved edge, 7.8mm pin height.
Ted Pella Inc PELCO X-TREME SEM Storage Box and holder for up to 18 of the 12.7mm SEM pin mounts
Very strong and rugged clear polycarbonate box to store standard pin mounts with 3.2mm (1/8"). This box is watertight, crushproof and dustproof. The strong hinges, locking clasps and soft silicone O-ring seal makes this an ideal transport, shipping and storage box for SEM samples on pin mounts. The holder insert is numbered 1-18 and accommodates all types of pin mounts form 6.4 to 50mm diameter.
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1/2" Head with Shorter Pin (6 mm), Aluminum, 1/8" Pin diameter
Cambridge, Phillips, Camscan, B&L, Etec, Zeiss SEM specimen mounts. Tapered end pin, slotted head.
Head: 1/2"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences Forensic Certified SEM Mount 8 mm pin
This mount is made from a special certified Aluminum alloy which does not contain any of the objectionable elements that may interfere with samples collected for GSR . These mounts are 12.7 mm x 11 mm.
Electron Microscopy Sciences SEM Clip Specimen Block, 8 Clips
Engraved specimen block. Numbered. Measures 12 x 48 mm. Comes complete with pin. The 8 clip is numbered 1-8.
Electron Microscopy Sciences Capsule Block Storage Box
For the storage of 15 capsule blocks in numbered cavities.
Cytiva Centrassette P holder including torque wrench and socket
Centrassette P holder including torque wrench and socket
Electron Microscopy Sciences 3mm Circlips Sample Holders
Circlips are for all EMS TEM sample holders and specimen rods. They are made from heat treated Beryllium copper. The Circlip extraction tool is for removing our Circlips from all TEM sample holders.
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1/2" Head with Shorter Pin (6 mm), Aluminum, 1/8" Pin diameter
Cambridge, Phillips, Camscan, B&L, Etec, Zeiss SEM specimen mounts. Tapered end pin, slotted head.
Head: 1/2"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1/2" Head with Shorter Pin (6 mm), Aluminum, 1/8" Pin diameter
Cambridge, Phillips, Camscan, B&L, Etec, Zeiss SEM specimen mounts. Tapered end pin, slotted head.
Head: 1/2"
Pin height: 6 mm
Pin diameter: 1/8"
Electron Microscopy Sciences Hitachi M4, Hitachi M4
Large double-slot set screw vise with (2) 2.5 mm x 5 mm deep slots. Clamp thin specimens and cross sections without conductive paint or tape. Dimensions: 25 x 10 mm (1 x 0.4"). Material: Machined aluminum with 2 stainless steel allen set screws. Includes allen wrench.
Type: Hitachi M4
Electron Microscopy Sciences XX-Large Bulk Specimen Holder
Machined aluminum specimen holder for scanning electron microscopy holds up to 3" specimens. Opening is 80 mm wide x 48 mm long x 13 mm deep. Stainless steel allen set screws keep specimen in place. 3.2 mm pin. Allen wrench included.
Electron Microscopy Sciences Clip SEM Pin Mount, 18 mm, 1 clip
Specially designed for easy, quick and clean mounting of any type of thin specimen on specimen stubs. These spring-loaded clips accommodate samples of up to 2 mm thickness. Samples are held securely by small spring-loaded clips and allow for easy change of samples. Adhesives are not required, eliminating possible outgassing issues and saving time. Ideal for holding silicon chips, paper, wire, threads, thin films, sheet metal, etc.
Diameter: 18 mm
Includes: 1 clip
Pin height: 6 mm
Electron Microscopy Sciences SEM Clip M4 Cylinder Mount, 2 clips, 50 mm, 6 mm Pin height
These spring-loaded clips accommodate samples of up to 2 mm thickness. Samples are held securely by small spring-loaded clips and allow for easy change of samples. Adhesives are not required, eliminating possible outgassing issues and saving time. Available with single and multiple clips and are ideal for holding silicon chips, paper, wire, threads, thin films, sheet metal and more. SEM Clip Mounts with multiple clips can hold larger samples or multiple smaller samples.
Includes: 2 clips
Diameter: 50 mm
Pin height: 6 mm