Electron Microscopy Supplies
Electron Microscopy Sciences Graphene on 2000 Mesh Cu Grid, 1 layer, 0.35 nm thick, 96.4% Transparency
CVD graphene on microporous copper TEM grids with beryllium-copper support aperture. The graphene film appears as a near-transparent to light-grey film on the surface of the red-brown microporous copper TEM grid. For support, the TEM grid is attached using epoxy to a gold-colored beryllium-copper disk with a 2 x 1 mm aperture. Graphene coverage of the TEM grid is better than 75 percent.
Layers: 1 layer
Thickness: 0.35 nm
Transparency: 96.4%
Electron Microscopy Sciences Formvar/Carbon Film 25-50 nm/3-4 nm thick on Thin Bar Hexagonal 200 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 25 to 50 nm thick with a 3 to 4 nm carbon coating.
Grid: Nickel
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 6/6.5 on Gold 400 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Electron Microscopy Sciences Formvar/Carbon Film 3-4 nm/3-4 nm thick on Hexagonal 300 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 5 to 6 nm thick with a 3 to 4 nm carbon coating.
Grid: Nickel
Electron Microscopy Sciences Graphene on Lacey Carbon on 300 Mesh Cu Grid, 6-8 layers, 2.1-2.8 nm thick, 78.5-83.2% Transparency
CVD Graphene TEM support films supported by lacey carbon film on a 300 mesh copper TEM grid. The high quality graphene is produced by chemical vapor deposition, a process by which gaseous reactants are deposited onto a substrate. The graphene film appears as a near-transparent to light-grey film on the surface of the lacey carbon mesh on a red-brown colored copper TEM grid. Graphene coverage of the TEM grid is better than 75 percent.
Layers: 6-8 layers
Thickness: 2.1-2.8 nm
Transparency: 78.5-83.2%
Electron Microscopy Sciences Quantifoil Holey SiO2 Film R 1/4, Gold 400 mesh Grid
QUANTIFOIL is a perforated Silicon dioxide SiO2 support foil with pre-defined hole size, shape and arrangement. Used in cryo-electron microscopy where the carbon film should be outside the frame of the image. 1 µm hole and 5 µm period.
Electron Microscopy Sciences EMS Oval Hole Grids, 2 x1 mm, Nickel
Grids are 3.05 mm diameter.
Grid: Nickel
Thickness: 27 µm +/- 5 µm
Hole: 2000x1000 µm
Bar:
Electron Microscopy Sciences EMS Holey Carbon Film 4-6 nm thick on 300 mesh Gold Grid
A thin film of carbon with round holes. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Gold
Thickness: 4-6 nm
Electron Microscopy Sciences Holey Carbon Film with Ultrathin Formvar 3-4 nm thick on 400 mesh Gold Grid
The continuous ultrathin film on holey film allows for the thinnest support film that still has adequate strength to withstand specimen preparation. Thickness: Formvar 3-4 nm. Supported by a mesh grid.
Grid: Gold
Simpore Inc 5 nm thick Non-porous Silicon Nitride(8) 50x50 µm + (1) 50x100 µm windows2.9 mm hexagonal + 0.1 mm thick chip framePack of 10
5 nm thick Non-porous Silicon Nitride(8) 50x50 µm + (1) 50x100 µm windows2.9 mm hexagonal + 0.1 mm thick chip framePack of 10
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 1.2/21.2 on Copper 200 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Grid: Copper
Mesh: 200
Electron Microscopy Sciences AFM Substrate Ultra-Flat Silicon Wafer 6", 150 mm diameter, <100> Orientation
These ultra-flat wafers can be used for substrate studies or as substrate for AFM and SEM samples by cleaving the wafer.
Diameter: 150 mm
Orientation: <100>
Thickness: 675 µm±20 µm
Roughness: Typically 2-3Å
Resistivity: 10-20 Ohm-cm
Electron Microscopy Sciences mPrep™ X-Pierce hairline cross-cut piercable film
mPrep System Accessory compatible with mPrep/s and mPrep/g.
Electron Microscopy Sciences Graphene Oxide 2 Layers on Thermal SiO2 on UltraFlat Silicon
Graphene oxide on ultra-flat thermal SiO2.
Type: 2 layers
Electron Microscopy Sciences Quantifoil Holey Carbon Film R 2/1 on Copper 200 mesh Grid
QUANTIFOIL is a perforated support foil with pre-defined hole size, shape and arrangement. It has advantages in electron microscopy (EM) or low-energy electron point source (LEEPS) microscopy when compared with conventional holey film.
QUANTIFOIL with circular holes is used in cryo-electron tomographic reconstruction. The roundness of the holes is advantageous with respect to the formation of an ice layer of constant thickness. The whole size chosen depends on the magnification used, and on whether or not one wishes to include support film in the image. Assessment of the image quality is easier when foil is included in the picture, because the power spectrum of a foil is stronger than that of unsupported ice.
Grid: Copper
Mesh: 200