Mills
BioSpec Products BioSqueezer, quick freeze 10-100 mg of soft animal and human tissue.
The BioSqueezer is used to "snap-freeze" (quickly freeze) 10-100 mg of soft animal and human tissue. It does the same thing as a classic freeze clamp but is easier to use and gives more reproducable results.Fresh tissue is compressed into a thin disc about the size of a small coin under pressure from a stainless steel clamp head that has been pre-cooled in liquid nitrogen or dry ice. Freezing occurs in a few milliseconds, thus offering a "snapshot" of metabolic events in the cells. The hard frozen disc is easily fragmented by hand or by grounding in a Cryo-Cup mortar and pestle for subsequent rapid extraction of labile nucleic acids, proteins and other intracellular products.
World Precision Instrument #1 Carbide Ball Mill
This line-powered micro drill will make easy work of grinding, finishing, cutting and drilling bone, teeth and other material. The high-torque 35,000 rpm (maximum) motor is quiet and has minimal vibration which reduces wear on the motor and provides greater comfort for you. It also features a forward and reverse switch, “E Type” handpiece and handpiece holder. The handpiece has a removable nose cone that can be cleaned and sterilized. It accepts 3/32” and 2.33mm bur shanks. Unlike battery-powered drills, this unit maintains consistent power for the duration of use. The wide range of speeds allows you to control the amount of heat generation.
Grainger Ball End Mill Single End 6.00mm Carbide
The Micro 100 Ball End Mill is a 4-flute carbide end mill with a ball end. It has a 1/4" shank diameter and is available in multiple diameters from 1/8" to 1/2". The ball end allows milling of 3D contoured surfaces. It can machine steels, stainless steels, cast iron, non-ferrous metals, and non-metallic materials. The 4-flute design provides good chip evacuation. This end mill is made of solid carbide for wear resistance and has TiAlN coating for heat resistance and lubricity. It has center-cutting geometry allowing plunge cuts into material. Recommended speeds are 20,000-30,000 RPM with feed rates of 8-20 IPM.
Felix Storch Inc ACCUCOLD Control'D Rm Temp. ARG31PVBIADA-CRT 3cf
ACCUCOLD ARG31PVBIADA-CRT (2.83cf) Controlled Room Temperature (CRT 68F TO 77F) cabinets are designed and purpose-built for ambient medication and vaccine storage in pharmacy and patient care areas. PRE-SET TO 72F. Equipped with Hi/Lo Temp Alarm, Remote Contacts, open door alarm, power failure alarm, Sensor failure alarm, Self closing door, Hospital grade cord & plug, Access Port, Antimicrobial Handle. +/-1.5C Variation The published temperature variation is derived from the maximum deviation of an NTC sensor in a 1 oz. vial located nearest the chamber geometric center during a 24 hour test period. LED interior Light. Glass Door, ADA HEIGHT, FOR BUILT-IN OR FREESTANDING USE: https://www.accucold.com/product/ARG31PVBIADA-CRT
Fritsch Milling And Sizing Inc Gassing Lid Cpl. Hard.Stain.Steel, P-5 Pl
Gassing lid P-5 pl with valves and seal ring made of hardened, stainless steel with steel casing
For all grinding bowls premium line 500 ml, 250 ml, 150 ml volume made of agate for PULVERISETTE 5 premium line.
By using this special lid, the grinding bowl can be used for grinding in inert gas and for mechanical alloying - quickly and safely. Gassing lids with Swagelok valves are available on request.
Fritsch Milling And Sizing Inc Special Sealing System for Ball-Mills (Inert Gas)
Additional lock-system for all grinding bowls 500 ml, 250 ml, 80 ml volume (for the transport of the closed grinding bowl)
With this special Additional Lock-System, you can gas-tight seal your grinding bowls for transport between filling in the glove box and the mill. With an additional adapter, it can also be used for small grinding bowls.
Electron Microscopy Sciences Micro-Mill Grinder 1, 220 V
For fast, high-speed grinding of small samples from 3/4" to 2". The unit comes with a stainless steel or hard-faced blade that will grind bauxite, bone, ceramics, Devorda's alloy, fly ash, frozen tissue, glass, kaolinites, limestone, muscle tissue, pharmaceuticals, pigment blends, rocks, slags, teeth and more. Grinding chamber measures 2 1/8"dia.x 1"deep. The temp of the grinding chamber is maintained by built-in heat exchangers and tubing connections on the cover and housing accept tubes for circulating water, methanol/dry ice liquid, or liquid nitrogen.Removable cover, grinding assembly, and milling blade head for easy cleaning. Aluminum housing has an epoxy finish and non-skid rubber feet. Control panel has an overload protection reset button and a pilot light. The 150 watts motor develops a torque of 30-ounce-inches (2.2 Kg-cm) at 12,000 rpm. With stainless steel blade, 0-5 minutes electrical timer with an ON position for continuous operation.
Perkin Elmer US LLC Grinding disc type 1, medium, standard
Medium (standard) grinding disc for Lab Mill 3610.
Electron Microscopy Sciences Grinding and Polishing Machine Model 900 CE MARK
This light weight, bench top grinding/polishing model is ideal for surface preparation of small metallographic specimens. It is adjustable in speed from 0 to 1725 RPM, and has 1/3 HP and it is fully grounded. The coolant is applied to the wheel through an adjustable flow control goose-neck spout. The unit comes complete with a removable rubber splash guard for cleaning and a compression fitting for an easy connection into the existing coolant supply.
Model 900 includes aluminum lapping plate, lapping plate removal wrench, metal splash guard, metal holding band (for plain back paper) and rubber splash guard. CE MARK.
Fritsch Milling And Sizing Inc Gassing Lid Sintered Corundum P-7 Premium Line
Sintered corundum gassing lid with valves and seal ring for all grinding bowls premium line 80 ml, 45 ml, 20 ml volume for PULVERISETTE 7 premium line.
By using this special lid, the grinding bowl can be used for grinding in inert gas and for mechanical alloying - quickly and safely.
Gassing lids with Swagelok valves are available on request.