General Spectrometer Accessories
Electron Microscopy Sciences Tungsten Coiled Filaments, Triple Strand 12 Turns, 5"L, 9.5 mm diameter
Coiled tungsten filaments. Coil length 51mm (2").
Type: Triple strand 12 Turns
Length: 5" horizontal helix
Diameter: 9.5 mm
Glass Expansion RF Coil Gold for Optima 2000/4000/5000/7000. To ensure correct installation, the Installation Kit 70-900-2003T is required. This is not included and must be ordered separately. It is re-useable so only needs to be ordered once.
RF Coil Gold for PerkinElmer Optima 2000/4000/5000/7000 DV Series ICP-OES. Compatible with PerkinElmer Optima 2000/4000/5000/7000 DV Series ICP-OES. The RF coil is susceptible to corrosion in the torch box, which eventually lowers the conductivity of the coil. The greater the corrosion, the larger amount of energy is needed to produce a plasma of the same power. Coils in a corroded condition, increases the stress applied to other components in the RF generating system, and can shorten the lifetime of your torch. Copper is used as the base material of most commercially available coils but different plating materials are available. Silver has the best conductance & gold the best corrosion resistance. For Silver 501907328.To install your coil and ensure proper alignment, we highly recommend our re-useable RF Coil Installation Tool Kit (501907329).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion RF Coil Silver PTFE Coated for Varian Series 2 Axial rdered once.
RF Coil Silver PTFE Coated for Agilent (Varian) Liberty Series 2 and Vista Axial ICP-OES. Compatible with Agilent (Varian) Liberty Series 2 and Vista Axial ICP-OES. The RF coil is susceptible to corrosion in the torch box, which eventually lowers the conductivity of the coil. The greater the corrosion, the larger amount of energy is needed to produce a plasma of the same power. Coils in a corroded condition, increases the stress applied to other components in the RF generating system, and can shorten the lifetime of your torch. Copper is used as the base material of most commercially available coils but different plating materials are available. Silver has the best conductance & gold the best corrosion resistance. For Gold 501907308 and Silver 501907309.To install your coil and ensure proper alignment, we highly recommend our re-useable RF Coil Installation Tool Kit (501907311).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End PVC Pump Tube 3tag, 72mm spacing, 1.30mm ID, Grey/Grey (PKT 6)
Contour Flared End PVC Pump Tube 3tag 1.30mm ID Gray/Gray (PKT 6).Tag Colors: Gray/GrayID mm: 1.30Wall Thickness mm: 0.86OD mm: 3.02Overall Length: 455mm (72mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Quartz Outer Tube for D-Torch, Arcos II EOP and MV
Quartz Outer Tube for D-Torch. Compatible with Spectro (Ametek) ARCOS II EOP or MV Axial D-Torch (30-808-3657). The D-Torch, provides a robust and high-performing alternative to both single-piece and semi-demountable quartz torches, ensuring greater robustness and a lower cost of ownership. With the D-Torch design, the analyst most often replaces only the outer tube, rather than replacing the entire torch or a quartz torch body.When not in use, clean as per recommended guidelines, and store in original box.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Sapphire Injector for Demountable ZipTorch, 1.8 mm I.D. Optima 4/5/7x00
This Demountable Injector is for use with Optima 4x00/5x00/7x00 ICP-OES series instruments. It is designed for use with the quartz, organics and silicon nitride demountable ZipTorches. The demountable design allows the injector to be removed and replaced efficiently for cleaning without dismounting the torch.
Glass Expansion IsoMist XR Kit for Shimadzu ICPE 9800.
IsoMist XR Kit for Shimadzu ICPE 9800. Compatible with Shimadzu ICPE 9800 ICP-OES. This IsoMist XR is programmable and temperature-controlled, with a glass cyclonic spray chamber now featuring an improved thermodynamic design that provides an extended temperature range of -25°C to +80°C. The temperature is settable in 1°C increments and can maintain accuracy of + or – 0.1°C. Proven performance results are, improved long-term stability and precision, no dilution for volatile organic solvents, reduced oxide interferences (ICP-MS), enhanced sensitivity and accuracy, lower detection limits, faster washout, and reduced hazardous waste/disposal fees.Replacement parts include 21-809-3270, 21-809-3998, and 501907304.The IsoMist XR comes standard with a borosilicate glass spray chamber. Optional quartz or PFA HF-resistant spray chambers can be ordered separately.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC 1.2 mm I.D. Alumina Injector for Optima 4300V/5300V/7300V
This Alumina Injector is included in the Quick-Change Torch Module for Oil Analysis (N0770910) and the Organics Sample Introduction Kit for Optima 4300 V/5300 V/7300 V (N0770732).
Perkin Elmer US LLC Alumina Injector, 0.8 mm I.D.
This Alumina Injector is for use with Optima 2x00/4x00/5x00/7x00 DV ICP-OES series instruments. Alumina injectors are corrosion-resistant to all mineral acids including HF and aqua regia. They are also used with less volatile organic solvents, e.g., xylene.
Glass Expansion IsoMist XR Basic Kit ROL
IsoMist XR Basic Kit ROL. Compatible with all ICP-OES and ICP-MS. This IsoMist XR is programmable and temperature-controlled, with a glass cyclonic spray chamber now featuring an improved thermodynamic design that provides an extended temperature range of -25°C to +80°C. The temperature is settable in 1°C increments and can maintain accuracy of + or – 0.1°C. Proven performance results are, improved long-term stability and precision, no dilution for volatile organic solvents, reduced oxide interferences (ICP-MS), enhanced sensitivity and accuracy, lower detection limits, faster washout, and reduced hazardous waste/disposal fees.Replacement parts include 502703176, GAZ-04-90, and 501907304.The IsoMist XR comes standard with a borosilicate glass spray chamber. Optional quartz or PFA HF-resistant spray chambers can be ordered separately.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Elegra Membrane
Replacement Elegra membrane. Compatible with all Glass Expansion Single and Dual-Channel Elegra Argon Humidifiers.If the Elegra membrane gets damaged, appears discolored or is suspected of being dirty/clogged, it should be replaced. Frequently inspecting the water level, and changing the water often, can eliminate algal growth and unwanted accumulation of debris. Do not leave water in Elegra for extended periods of time if not being used. To properly maintain components, if the Elegra Argon Humidifier is not used for long periods of time it is best to empty the water and dry components for storage.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Spacer for Demountable Cell - PTFE, 0.5 mm, Qty. 3
PerkinElmer supplies round spacers made of either lead or teflon. These spacers come in a variety of thicknesses, allowing you to customize the Universal Demountable Cell's path length to the experiment's requirements.
Glass Expansion Conikal DC Nebulizer 2mL/min with 1,500mm tubing, Includes NFTS-075 UniFit Connector with 0.75mm ID x 1.3mm OD x 1500mm long tubing (1 piece), and 70-803-1311 Gas Fitting with Ratchet Nebulizer connector
Conikal DC Nebulizer 2.0mL/min, includes UniFit Connector with 0.75mm ID x 1.3mm OD x 1500mm long tubing (1 pc) and DC Gas Fitting Type 41 with ratchet connector (1 pc). Compatible with Shimadzu 9000/9800 ICP-OES.Optimum nebulizer gas flow rate is 1.0L/min and sample flow rate is 2.0mL/min. Recommended not to exceed optimum 2.0mL/min sample flow rate; however, lower gas and sample flow rates are OK. The backpressure should read approximately 40 psi at 1.0L/min gas flow rate. The Conikal nebulizer is a high-performance, general use glass nebulizer, that tolerates up to 5% TDS and 75um particulates.Replacement parts include P/Ns NFTS-075 and 501907301.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) and Eluo Nebulizer Cleaning Tool (P/N NC9462559). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001