Slide Mounting Media
Enzo Life Sciences Antifade mounting medium (hardset) (10ml)
Antifade mounting medium (hardset) is an antifade reagent that causes little or no quenching. Use of the mounting medium significantly extends the photobleaching half-life of the fluorescent stain. Long Term Storage: -80°C. Applications: IF, IHC, Fluorescence microscopy, Fluorescent detection .
Electron Microscopy Sciences Citifluor™ Mountant Solution AF2, Glycerol Based, Non Hardening 100 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. A glycerol solution contains an amine antifadent. Select buffer.
Material: Glycerol Based
Type: Non Hardening
Electron Microscopy Sciences Fluoro Gel with Dabco 250 ML
Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. Use for immunofluorescence and confocal microscopy. Storage at 2-8 degree C is recommended
Electron Microscopy Sciences EMbed-812 kit, 1 kit
Replacement for the discontinued Epon-812. Produces the same results in terms of preservation, handling, sectioning, and staining as the old Epon-812. Kit consists of 450 ml EMbed-812, 450 ml DDSA; Specially Distilled, 450 ml NMA, and *50 ml DMP-30. *Please note that wherever DMP-30 is listed as the accelerator in our embedding media kits you have the option to use BDMA in place of it. BDMA is less viscous, has a longer shelf life, and offers better penetration (it should be noted, however, that in order to achieve the optimum results when using BDMA in place of DMP-30 you must vary the amount. DMP-30: 1.5-2%; BDMA: 2.5-3%).
Electron Microscopy Sciences EMS Shield Mount 30 ML
EMS Shield Mount is an aqueous non-permanent, low viscosity mounting medium for immunofluorescence and confocal microscopy. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during storage at 4 degree C in the dark. This medium does not contain phenylenediamine, which destroys immunofluorescence of Cy dyes.
Electron Microscopy Sciences Liquid Release Agent 100 ML
A hydrosoluble mold-release agent for use in the flat embedding of micro-organisms, and as a replacement for the coating of glass slides to produce a smoother, even surface. The reference below describes the selection and precisely oriented sectioning of single cells by light microscopy, prior to examination by EM. Reymond, O.L. and Picket-Heaps, J.D., (1983) J. Microscopy, 130, 179.
Electron Microscopy Sciences Low viscosity embedding media kit, 1 kit
Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam. Kit consists of: 450 ml NSA, 225 ml ERL 4221 , 225 ml DER 736 , 25 ml DMAE.
Andwin Scientific Aqua-Mount Mounting Medium, M800 20ml
Aqua-Mount Mounting Medium is a non-fluorescing, aqueous formula that is made to be utilized for immunostaining. It is sold in a quantity of 20 mL.
Electron Microscopy Sciences Technovit 3040 Mounting Medium Kit
Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a firm, durable bond between Technovit and the specimen.
Technovit 3040 consists of two components–powder and liquid–allowing simple mixing, easy adherance to the specimen, and fast curing. For fixing the mount, a high viscous consistency is required(i.e. a mixing ratio of approximately 2-3 parts per volume powder: 1 part per volume liquid) has proven to be the most advantageous.
Cayman Chemical AOCS MedIM nd LNgchaIn F 50mg
A mixture of medium- and long-chain fatty acid methyl esters; contains seven saturated and mono- and poly-unsaturated fatty acid methyl esters; intended for use as a reference standard for the detection of fatty acids in coconut, palm kernel, babassu, and ouri-ouri oils, among others, by GC-MS; supplied in an amber ampule in which the headspace has been purged with nitrogen/argon to prevent lipid oxidation
Electron Microscopy Sciences EUKITT Neo Mounting Medium 100 ML
The high-quality classic of mounting media now xylene free. EUKITT Neo is xylene-free and characterized by fast curing, crystal-clear optics, low fluorescence, favorable refractive index, good fluidity and low shrinkage. The preparations are stable without cracking and discoloration. EUKITT Neo is colorless and does not change shape, structure or color of the material to be examined. The unique formulation of this version of EUKITT uses self-sustaining raws that have no solvent base at all. The pleasant odor facilitates working in the laboratory.