Slide Mounting Media
Electron Microscopy Sciences Technovit 3040 Mounting Medium Kit
Technovit 3040 yellow is a fast curing methyl methacrylate-based resin, whose chemical composition warrants a firm, durable bond between Technovit and the specimen.
Technovit 3040 consists of two components–powder and liquid–allowing simple mixing, easy adherance to the specimen, and fast curing. For fixing the mount, a high viscous consistency is required(i.e. a mixing ratio of approximately 2-3 parts per volume powder: 1 part per volume liquid) has proven to be the most advantageous.
Electron Microscopy Sciences Epo-Fix Embedding Kit Small Clear
A two component epoxy resin, characterized by negligible shrinkage during curing and good mechanical properties in its hardened state. It is particularly suited for embedding hard samples of complicated shape and for vacuum impregnation. Samples such as paper, silicon, ceramics, metals, wafers, and chips are suitable to be used with Epo-Fix. Kit consists of: 1 kg resin, 120 g hardener, 15 cups, 15 stirrers, 1 x 5 mL and 20 mL syringes.
Electron Microscopy Sciences Low viscosity embedding media kit, 1 kit
Provides excellent penetration for embedding biological tissues and rapid infiltration. Easy to prepare. The hardness is adjusted by changing the proportion of the flexibilizer (DER 736). The blocks have good trimming and sectioning qualities. Thin sections are tough under the electron beam. Kit consists of: 450 ml NSA, 225 ml ERL 4221 , 225 ml DER 736 , 25 ml DMAE.
Electron Microscopy Sciences LR White resin only; Hard Grade Catalyzed
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade.
Electron Microscopy Sciences Technovit Medium 4000 Large Kit
Technovit 400 is a fast curing, cold polymerizing, three-component resin, which is based on a modified polyester, and it is available in the form of powder, syrup I, and syrup II. It is mixed at a ratio of 2:2:1 (powder:syrup I:syrup II). Syrup I and Syrup II are mixed together first and the powder is mixed in last. The color is white opaque.
Technovit 4000 is distinguished by its low shrinkage when polymerizing and its perfect margin fit. Due to its excellent flow characteristics, Technovit 4000 guaranteed that geometrically demanding samples are optimally embedded. Its excellent adhesion properties with regard to metal are a guarantee of gapless embedding of all metal samples. These properties are of particular importance when working with samples that require good edge definitions.
After mixing, Technovit 4000 can be used for casting for approximately 4 minutes and takes approximately 8 minutes to cure.
Electron Microscopy Sciences DEPEX Mounting Media, 500ml
DEPEX Mounting Media is a colorless, neutral, xylene miscible mountant which is suitable for preparations where Canada Balsam is usually used. It comes in the amount of 500ml.
Electron Microscopy Sciences Technovit 8100 Embedding Kit
Technovit Glycol Methacrylate embedding kits developed by Kulzer in Germany are the most convenient to use and offers the best embedding results. Kits give better results offering improved morphology and allows for 1 micron serial sectioning. Polymerization temperature never exceeds 40 degree C, which makes either kit a potential choice for enzyme histochemistry.
The initiator is prepackaged, eliminating messy handling of dry components, and by eliminating aromatic amines from the formation, the components are significantly less toxic. The consistent high quality of raw materials used to make the resin allows for a permanent clear colorless block and, most important, reproducible results
Electron Microscopy Sciences Acrytol Mounting Medium 16 OZ
Acrytol is a rapid-drying mounting medium which enables slides to be screened immediately. It has a low viscosity, allowing the medium to flow easily. It also prevents air bubbles from becoming trapped. Acrytol contains an antioxidant to inhibit stain fading and prevent the formulation of annual rings. A thin coating of Acrytol is all that is needed to adhere a coverglass to a microscope slide.
Sigma Aldrich Fine Chemicals Biosciences Eukitt(R) Quick-hardening mounting medium for microscopy | 25608-33-7 | MFCD00145620 | 500ML
Eukitt(R) Quick-hardening mounting medium for microscopy | 25608-33-7 | MFCD00145620 | 500ML
Electron Microscopy Sciences Slide Coating Adhesive 100 ML
Prepared from 3-aminopropyltriethoxysilane in acetone. Good for coating glass slides to adhere paraffin sections for further processing without sections falling off from the slide. READY TO USE.
Cayman Chemical AOCS MedIM nd LNgchaIn F 50mg
A bacterial metabolite inhibits the growth of A aurescens A globiformis A oxydans A pascens and R erythropolis bacteria (MICs 10 1 10 3 and 10 g/ml respectively) and HMO2 HepG2 and MCF-7 cancer cells (GI50s 0 28 0 42 and 2 2 g/ml respectively) active against P falciparum and T rhodesiense (IC50s 1 19 and 1 97 g/ml respectively)
Cayman Chemical LNP Encapsulation Buffer Tabl
A multi-kinase inhibitor inhibits CK2 (IC50 0.098 UM) the PI3K subunits p110a p110B p110 and p110Y (IC50s 0.497 0.554 0.331 and 3.8 UM respectively) and DNA-PK (IC50 6 UM) among other kinases as well as CK1 GSK3a and GSK3B by greater than 40 at 10 UM reduces viability of SGC-7901 cells at 12.5 25 and 50 UM induces apoptosis and autophagy in SGC-7901 cells at 50 UM reduces tumor volume in DLD-1 and LoVo mouse xenograft models at 2 ng/ml/kg reduces aging-induced increases in the number of aging SA-b-gal-positive human VSMCs at 20 UM in the 5th to 15th generations