Embedding Accessories
Electron Microscopy Sciences SupaMega Stainless Steel Base Molds 36x36x10 mm, 10 mm height
The SupaMega range of stainless steel base molds have extra deep side walls allowing wax to be decanted into the cassettes during embedding without the risk of the usual leakage of wax. The smaller faced mold also saves wax on medium sized blocks too large to fit into standard cassettes negating the use of full size molds.
Size: 36 x 36 mm
Height: 10 mm
Electron Microscopy Sciences Biopsy Paper Bags, 74 x 94 mm
These bags are made from porous paper which provides maximum tissue safety during processing. They permit proper fluid exchange and drainage. To Use simply introduce the specimen into the bag and fold it enclosing the cassette or capsule. You are now ready to process as usual.
Size: 74 x 94 mm
SAKURA FINETEK USA INC Tissue-Tek Block Filing Cabinet 2400, 6 Drawers, High Capacity Storage Solution
The Tissue-Tek Block Filing Cabinet 2400 is a high-capacity storage solution for histology labs. It offers efficient organization for 2,400 formalin-fixed paraffin-embedded specimen blocks, ensuring secure archiving. Its ergonomic design includes deep drawers with angled label surfaces for easy access and lookup, a latch mechanism preventing accidental openings, and foam inserts for added protection. Constructed from durable plastic, it’s stackable up to 3 units, optimizing laboratory space.
Electron Microscopy Sciences Reusable Silicone Rubber Mold Round, 1" diameter
These reusable molds for cold embedding are made from sturdy, flexible, white silicone, and are easily removed without the need for release agents. Much smoother than rubber molds, enabling easy identification of samples in clear resins. They hold their shape to produce consistent, reliable round embedding.
Size: 1" diameter
Electron Microscopy Sciences EMS EMS Poly III Evaporation-Controlled Automated Embedding and Polymerization
The EMS Poly III reduces lengthy and sometimes tedious manual embedding procedures for electron microscopy to a few simple steps for up to 52 vials. It uses a proper combination of pressure and temperature. The specimen chamber is temperature controlled from room temperature to 70 degree C. The pressure in the chamber can be reduced from ambient pressure with an inbuilt vacuum-pump that controls pressure to within narrow limits and warrants solvents will evaporate without the risk of explosive boiling. The exhaust of the vacuum pump can vent into a fume hood.
The instrument modifiable preset programs are optimized for an efficient removal of solvent from specimens eliminating the risk of boiling. Bulk removal of solvent is followed by the thorough removal of trace amounts.
Load at the end of a workday and (when using acetone or propylene oxide) the next morning are ready for polymerization after being topped off with pure resin.
Electron Microscopy Sciences Reusable Silicone Rubber Mold Rectangular, 3 x 2"
These reusable molds for cold embedding are made from sturdy, flexible, white silicone, and are easily removed without the need for release agents. Much smoother than rubber molds, enabling easy identification of samples in clear resins. They hold their shape to produce consistent, reliable round embedding.
Size: 3 x 2"
Electron Microscopy Sciences Peel Away Disposable Embedding Mold Truncated Shape 8 x 8 mm
Peel Away Disposable Embedding Molds are used for plastic or paraffin embedding. No block trimming needed. Inside fingers hold ID slip which becomes embedded in the block for positive permanent identification.
Size: 8 x 8 mm
Alkali Scientific CellPro Polyester Biopsy Bags
Optimize specimen processing and preservation with CellProPolyester Biopsy Bags designed for solvent and acid resistance with a durable synthetic mesh (0 2mm) These high-quality biopsy bags provide a secure and efficient solution for histological applications ensuring maximum tissue safety and seamless fluid exchange Available in three sizes30 x 45mm 45 x 75mm and 75 x 95mmto accommodate a range of sample types Solvent and acid-resistant polyester material for enhanced durability 0 2mm synthetic mesh allows optimal fluid exchange for thorough specimen processing Secure tissue containment prevents sample loss during fixation and processing Three size options to fit various specimen needs CellProbiopsy bags offer a practical and efficient method for handling biological specimens Simply pour the fixative and sample directly into the bag where the mesh design ensures effective filtration while securely containing the biopsy for accurate histological analysis Once sealed the biopsy bag
Electron Microscopy Sciences Aluminum Embedding Tray for Polyethylene Molds
Aluminum Embedding Tray is available with 6-position to hold these Individual Mold during polymerization. Comes with anodized blue and natural color.
Electron Microscopy Sciences Biopsy Bags, Size: 74 x 94 mm., 100/PK
These bags are made from porous paper which provides maximum tissue safety during processing. They permit proper fluid exchange and drainage. To Use simply introduce the specimen into the bag and fold it enclosing the cassette or capsule. You are now ready to process as usual. Size: 74 x 94 mm.
Electron Microscopy Sciences Flat Embedding Mold Flat Embedding Mold Double Ends, 5 mm deep, 14 x 4 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. Flat mold has both ends tapered for embedding in both ends of each casting.
Depth: 5 mm
Size: 14 x 4 mm
Cavities: 21