Glassware Vacuum Traps
Glassware Vacuum Traps
Clear polypropylene canisters allow for visual inspection of trap contents
Vacuum Tubing Kit for use with Labconco CentriVap Vacuum Concentrators and RapidVap Evaporators.
Help to provide secondary protection to vacuum pumps in evaporation systems
|For Use With (Equipment)||CentriVap™ system|
For use in FreeZone freeze dry units
For any mechanically refrigerated freeze-dry system; ensure efficient processing of samples with low eutectic points
|For Use With (Equipment)||Refrigerated freeze-dry system|
|Temperature Range (English)||−103°F|
|Temperature Range (Metric)||−75°C|
|For Use With (Application)||Prevent contaminants from migrating into the vacuum pump|
Vacuum Trap Body Only, 71/60. Replacement part for CG421521.
Chemglass Life Sciences Vacuum Trap, Complete, Trap Bottle 60mm OD x 300mm Overall Length, 30mm OD Side and Inner Tubes, 55/50 Jt.
Vacuum Trap, Complete, Trap Bottle 60mm OD x 300mm Overall Length, 30mm OD Side and Inner Tubes, 55/50 Jt. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
Chemglass Life Sciences Vacuum Trap, Complete, Trap Bottle 54mm OD x 275mm Overall Length, 25mm OD Side and Inner Tubes, 50/50 Jt.
Vacuum Trap, Complete, Trap Bottle 54mm OD x 275mm Overall Length, 25mm OD Side and Inner Tubes, 50/50 Jt. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.
Vacuum Trap Body Only, 55/50. Replacement part for CG451520.
60mm O.D. vacuum trap consists of body with Ace-Thred, adjustable inner tube, and nylon bushing with FETFE o-ring. Has #15 threaded side arm. For use with PTFE Ace-Safe connectors, to allow safe, easy tubing connect-disconnect.
NC1428678 BUBBLE TRAP HI-FLOW VACUUM
Vacuum Trap, O-Ring, Airfree, Schlenk, Complete. Two-piece vacuum trap with # 20 o-ring joints on both the inlet and outlet ports. The seal between the trap stopper and body is made with a 57mm flat o-ring flange for total grease-free operation. Trap body is 57mm OD x 300mm in length to be used with a 4,300mL Dewar flask (CG-1593-05 or CG-1594-05). Arms on stopper portion connect to AF-0300-03 manifold and AF-0300-06 shut off adapter. Complete item consists of the trap body and stopper, one CG-139-02 horseshoe clamp, one #331 Viton o-ring and two #214 Viton o-rings.
Trap, vacuum, 25mm body diameter, 200mm body length, 10mm OD inner & side tube
Chemglass Life Sciences Vacuum Trap, Dewar Type, PTFE Stopcock, 1000mL Reservoir, Inner Chamber ID: 85mm, Inner Chamber Depth: 300mm, 650mm OAH x 120mm Width
Vacuum Trap, Dewar Type, PTFE Stopcock, 1000mL Reservoir, Inner Chamber ID: 85mm, Inner Chamber Depth: 300mm, 650mm OAH x 120mm Width. Dry ice, Dewar style trap condenser designed for large volume solvent removal. Lower reservoir has a capacity of 1000mL, with a 4mm PTFE stopcock. Serrated hose connections are 12mm at the smallest serration and 14mm at the largest serration. Optional UHMW Lid prevents evaporation of dry ice/acetone in trap.PLEASE NOTE: CG-4517 TRAPS ARE AVAILABLE PLASTIC COATED. PLEASE CONTACT US FOR DETAILS.
Vacuum Trap, 32mm Body OD x 250mm Body Length, 13mm OD Side and Inner Tubes. Similar to CG-4510 but with top inlet tube bent at a 90º angle.
Chemglass Life Sciences Vacuum Trap, 500mL Capacity, Fits 1900mL Dewar Flask, 310mm OAH x 130mm Width, Complete
Vacuum Trap, 500mL Capacity, Fits 1900mL Dewar Flask, 310mm OAH x 130mm Width, Complete. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in O.D. Trap is designed to fit into standard CG-1593 through CG-1595 Dewar flasks.
Trap, body, vacuum, 45/50, 51mm outer body OD, 250mm outer body length below joint
With automatic overflow shutoff valve located inside lid to help prevent cross contamination of regulators and wall vacuum outlets
|Includes||Overflow shutoff valve, 90° adapters, accessory and orthopedic port|