Chromatography Autosampler Vials Only
Microsolv Technology Corporation Vials, Crimp Top, Glass. Clear / Clear Insert, 300ul, with Write-On Patch and fill lines, Fused Insert Style. An 11mm Serum Finish with 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vials and Inserts are made with first hydrolytic, Class A, Type-N51A Clear, Borosilicate Glass. The insert has a 300ul total fill volume and a 3ul residual volume for many autosamplers and autosampler needles. The Write-On Patch and fill lines are epoxy paint and will resist smearing when working with solvents. Use with 11mm aluminum crimp caps. These lower cost Fused Insert vials have serum finish tops that provide the best seal for chromatography, when used properly with correct aluminum crimp caps.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear / Clear Insert, 300ul with Write-On Patch and fill lines, Fused Insert™, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vials and Inserts are made with first hydrolytic, Class A, Type-33 Clear, Borosilicate Glass. The insert has a 300ul total fill volume and a 3ul residual volume for many autosamplers and autosampler needles. The Write-On Patch and fill lines are ceramic and will resist smearing or scratching even when working with solvents. The AQ™ Brand Fused Inserts sit slightly above the top lip of the vial and this unique feature allows for a near perfect seal with the cap's septa. The bottom depth, heights and alignment are designed, and QC controlled for maximum recovery and needle safety. These inserts are not attached to the bottom of the vial and do not suffer from cracking at this fused point and prevents leaking which can be observed in competitive brands.
GENTECH SOLUTIONS LLC 11mm Silver Aluminum Crimp Seal, .020" PTFE Disk Septum
EliteChem Made in the USA with the highest purity silicone and premium-quality PTFE films to produce the Septum in the closures. Compatible with chromatography vials with a 11mm seal diameter.
GENTECH SOLUTIONS LLC 9mm Black Open Top Screw Thread Cap, Bonded 0.040" Red Silicone Rubber/Clear PTFE
EliteChem Made in the USA with the highest purity silicone and premium-quality PTFE films to produce the Septum in the closures. Compatible with chromatography vials with a 9-425 closure size.
Grainger Crimp Fitting 45 Deg 1 I.D. 1 F BSPP
The Grainger 16P792 is a 1/4 HP, 115V, 60Hz, 1 phase, 3450 RPM, 56C frame, open drip proof, ball bearing, C-face, sleeve bearing electric motor. It has a 1/4" diameter shaft and measures 4-1/2" in length. The motor operates on single phase power and has a thermally protected enclosure. It can be used for a variety of light industrial applications.
Microsolv Technology Corporation Vials, Crimp Top, Glass. Clear, 1.8ml, Max Recovery™. Deactivated. An 11mm Serum Finish with 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type 33, Deactivated / Silanized Borosilicate Glass. Features an 8ul residual volume for most autosamplers due to the center draining interior, smooth walls (no ledges) and the conical bottom. This product is manufactured in an ISO 9001:2015 Certified facility. Compares to Agilent Maximum Recovery vials. Use with 11mm aluminum crimp caps. These lower cost center draining vials have serum finish tops that provide the best seal for chromatography, when used properly with correct aluminum crimp caps.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear / Clear Insert, 300ul with Write-On Patch and fill lines, Fused Insert™, Deactivated, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vial and Inserts are made with first hydrolytic, Class A, Type 33 Clear, Silanized, Borosilicate Glass. The Write-On Patch and fill lines are ceramic and will resist smearing or scratching even when working with solvents.Insert bottom depth, heights and alignment are designed, and QC controlled for maximum recovery and needle safety. This product is manufactured in an ISO 9001:2015 Certified facility. The AQ™ Brand Fused Inserts sit slightly above the top lip of the vial. This unique feature allows for a near perfect seal with the cap's septa. These inserts are not attached to the bottom of the vial and do not suffer from cracking at this fused point and prevents leaking which can be observed in competitive brands. Consistency from vial to vial is one feature that sets these vials apart from other similar silanized products. Good choice for low abundance analytes, some proteins and peptides. Compares to Q-Serts™ and other “Certified” Brands.
Microsolv Technology Corporation Vials, Snap Top, Glass. Clear, 1.2ml, MRQ™. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type-33 Borosilicate Glass. The MRQ Vials have a fill volume of 1.2ml and a very low residual volume of 2ul due to the center-draining effects of smooth walls (no ledges) and a conical bottom with a well that is slightly larger than autosampler vial needles. Side entry port needles will recover the maximum amount during use. Bottom depths of the wells are designed and QC controlled for the most critical autosampler to prevent needles hitting the bottom of the vials.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear / Clear Insert, 300ul with Write-On Patch and fill lines, Wide Tip Fused Insert™, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
Vials and Wide Tip Inserts are made with first hydrolytic, Class A, Type-33 Clear, Borosilicate Glass. The insert has a 300ul total fill volume and a 4ul residual volume for many autosamplers and needles. The Write-On Patch and fill lines are ceramic and will resist smearing or scratching even when working with solvents. The Wide Tip Insert bottom depth, heights and alignment are designed, and QC controlled for maximum recovery and needle safety. The wide bottom helps prevent bubble formation when filling quickly or using with automation. This product is manufactured in an ISO 9001:2015 Certified facility. Favorite choice of many clinical testing laboratories
Microsolv Technology Corporation Vials, Screw Top, Glass. Amber, 1.8ml, Max Recovery™, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type N51A, Reduced Surface Activity, Borosilicate Glass, amberized. Amber glass is often used for light sensitive compounds and is considered low actinic. This market leading 1.8ml vial has the low residual volume of 8ul due to the center-draining effects of smooth walls (no ledges) and a conical bottom, which allows needles with bottom entry ports to recover the maximum amount during use. Bottom depths are designed and QC controlled for the most critical autosampler to prevent needles hitting the bottom of the vials. This product is manufactured in an ISO 9001:2015 Certified facility. This is a very popular 1.8ml, center draining autosampler vial because of the consistency of the glass chemistry from batch to batch, vial to vial. Reduced surface activity is tested for each lot and certified. Excellent for low abundance analytes, pH sensitive analytes and for LCMS.
Microsolv Technology Corporation Vials, Snap Top, Glass. Clear, 1.2ml, MRQ™. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type-33, Reduced Surface Activity, Borosilicate Glass. The MRQ Vials have a fill volume of 1.2ml and a very low residual volume of 2ul due to the center-draining effects of smooth walls (no ledges) and a conical bottom with a well that is slightly larger than autosampler vial needles. Side entry port needles will recover the maximum amount during use. Bottom depths of the wells are designed and QC controlled for the most critical autosampler to prevent needles hitting the bottom of the vials. This is a very popular 1.2ml, center draining autosampler vial because of the consistency of the glass chemistry from batch to batch, vial to vial. Reduced surface activity is tested for each lot and certified. Excellent for low abundance analytes, pH sensitive analytes and for LCMS.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear, 1.2ml, MRQ™, 9-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial or storage bottle. 100/PK.
First hydrolytic, Class A, Type-33 Borosilicate Glass. The MRQ Vials have a fill volume of 1.2ml and a very low residual volume of 2ul due to the center-draining effects of smooth walls (no ledges) and a conical bottom with a well that is slightly larger than autosampler vial needles, with side entry ports to recover the maximum amount during use. Bottom depths of the wells are designed and QC controlled for the most critical autosampler to prevent needles hitting the bottom of the vials. This product is manufactured in an ISO 9001:2015 Certified facility.
Microsolv Technology Corporation Vials, Snap Top, Glass. Clear, 1.2ml, MRQ™. Deactivated. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type-33, Deactivated / Silanized, Borosilicate Glass. The MRQ Vials have a fill volume of 1.2ml and a very low residual volume of 2ul due to the center-draining effects of smooth walls (no ledges) and a conical bottom with a well that is slightly larger than autosampler vial needles. Side entry port needles will recover the maximum amount during use. Bottom depths of the wells are designed and QC controlled for the most critical autosampler to prevent needles hitting the bottom of the vials.