Filtered Search Results
Labconco™ SpillStopper™ Work Surface for 6 Ft. Protector™Premier™and Protector™XL Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco SpillStopper™ Work Surface is dished and contoured to conform to the interior liner to contain spills.
| Product Type | Work Surface |
|---|---|
| For Use With (Equipment) | Protector XL Laboratory Hood |
| Material | Epoxy Resin |
| For Use With (Application) | Laboratory Fume Hood Work |
Labconco™ Protector™ XL™ Fume Hoods
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Protector™ XL™ Fume Hoods with By-Pass Block are low-velocity and high performance. Feature chemical-resistant fiberglass, composite panel liners, Eco-Foil™ air foil and aerodynamic Clean-Sweep™ airflow openings.
| Receptacle Type | GFCI |
|---|---|
| Height (Metric) | 149.9 cm |
| Depth (English) | 37.7 in. |
| Color | Glacier White |
| Material | Powder-coated Steel |
| Product Type | Benchtop Fume Hood |
| Depth (Metric) | 80.5 cm |
| Voltage | 100/115 V |
| Height (Metric) Sash Opening | 71.1 cm |
| Amperage | 10 A |
| Certifications/Compliance | SEFA 1; CFR 29, Part 1910; ASTM E84-09C; NFPA 45; ANSI Z9.5; ASHRAE 110; CAN/CSA C22.2 No. 61010.1; UL 61010-1; SEFA 8, Cabinet Surface Finish Tests; UL 1805 |
| Lighting Type | LED |
| Coating | Powder |
| Liner Material | Chemical-resistant, Fiberglass-reinforced Composite |
| Hertz | 50/60 Hz |
Labconco™ LabSolutions™ Powder Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes grease, blood, agar, protein digestates, and other contaminants
| Form | Powder |
|---|---|
| Product Type | Detergent |
| Color-coded | Yes |
| pH | 12.5 |
| Scent | Unscented |
| For Use With (Application) | For use in Glassware washers, removes range of contaminants including Protein digestates, Agar, Blood and Grease |
| Sterility | Non-sterile |
Labconco™ Work Surface Accessory, Oval Polypropylene Cupsink
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Easily remove waste from your laboratory worktable with the Labconco Oval Cupsink.
Labconco™ LabSolutions™ Low-Foaming Liquid Detergent
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Removes a wide range of contaminants
Labconco™ LabSolutions™ Neutralizing Acid Rinse
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Mild acid corrects pH, reducing alkaline detergent residue
Labconco™ Protector™ Filtered Fume Hood Accessory, ADA Remote Control
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
For use with Protector Echo and Airo Filtered Fume Hood
Labconco™ Protector™ Filtered Fume Hood Accessory, RFID User Authorization Card
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
For use with Protector Echo and Airo Filtered Fume Hood
Labconco™ WaterPro™ PS Water Polishing Station
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
WaterPro™ PS Water Polishing Station with filters, prefilters and cartridges for Labconco WaterPro PS and RO Water Purification Systems.
| Flow Rate | 1.1 L/min. |
|---|---|
| For Use With (Equipment) | WaterPro™ PS polishing station |
| Resistivity | 16 to 18.2 MΩ·cm |
| Product Water Type | Type 1 |
| Daily Output | 1 to 250 L |
| Weight (English) | 9.5 lb. |
| Feedwater Source | Reverse Osmosis Tap |
| Endotoxin Concentration | <0.001 EU/mL |
| Bacterial Content | 0.001 CFU/mL |
| Weight (Metric) | 4.3 kg |
| Total Organic Carbon | <30 ppb |
Labconco™ Glassware Cart
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Carry glassware, plasticware and small instruments easily with the Labconco Glassware Cart.
Labconco™ Canopy Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Vent nontoxic odors, heat, and steam with a Labconco Canopy Hood.
| Height (Metric) | 45.7 cm |
|---|---|
| Depth (English) | 30 in. |
| Product Type | Canopy Hood |
| Depth (Metric) | 76.2 cm |
| Height (English) | 18 in. |
Labconco™ Protector™ Acid Digestion Hoods: 4ft., 115V
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Draw away harmful acid fumes with the Labconco Protector™ Acid Digestion Hood, a PVC hood with bypass airflow design.
| Height (Metric) | 149.9 cm |
|---|---|
| Depth (English) | 37.7 in. |
| Width (English) | 48 in. |
| Material | PVC |
| Width (Metric) | 121.9 cm |
| Pressure | 725 cfm at 0.17 in. H2O at 100 fpm |
| Flow Rate | 725 cfm at 0.17 in.; H2O at 100 FPM |
| Dimensions (L x W x H) | 48 x 37.7 x 59 in. |
| Product Type | Acid Digestion Hood |
| Depth (Metric) | 95.8 cm |
| Height (English) Sash Opening | 28 in. |
| Height (Metric) Sash Opening | 71.1 cm |
| Amperage | 10 A |
| Certifications/Compliance | ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CFR 29, NFPA 45, SEFA 1, SEFA 8 |
| Lighting Type | LED |
| Coating | Powder |
| Hertz | 50/60 Hz |
| Height (English) | 59 in. |
Labconco™ Protector™ Stainless-Steel Radioisotope Hood
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Provide protection from applications using radiochemicals with a Labconco Protector™ Stainless-Steel Radioisotope Hood.
| Height (Metric) | 149.9 cm |
|---|---|
| Depth (English) | 31.7 in. |
| Product Type | Radioisotope Hood |
| Depth (Metric) | 80.5 cm |
| Material | Stainless Steel |
| Certifications/Compliance | ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, NFPA 45, SEFA 1, UL |
| Lighting Type | LED |
| Height (English) | 59 in. |
Labconco™ Glove Box Gloves, Sleeves and Hands
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Glove box gloves, sleeves and hands are available in a variety of sizes, materials and thicknesses to suit your specific application. Choose from neoprene, latex, CSM or butyl.
| Product Type | Glove Box Gloves |
|---|---|
| Manufacturing/QMS Audit Standards | ISO 9001 |
| Sterility | Non-sterile |
| Hand | Ambidextrous |
Labconco™ Purifier™ Logic™+ and PuriCare™ Base Stand
Small and Specialty Supplier Partner
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Small and/or specialty supplier based on Federal laws and SBA requirements.
Learn More
Labconco Purifier™ Logic™+ and PuriCare™ Base Stands are designed to be used with Purifier Logic Class II Biosafety Cabinets and PuriCare Procedure Stations.
| Load Bearing Capacity (English) | 1000 lb. |
|---|---|
| Load Bearing Capacity (Metric) | 453.59 kg |
| Product Type | Telescoping Base Stand |
| Increments | 1 in. |
| Material | Steel |
| Surface Coating | Epoxy |