Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Cole-Parmer Food, Milk, and Dairy Tubing, 1" ID x 1-3/8" OD; 50 Ft
Food, Milk, and Dairy Tubing is non-toxic, taste-free and odor-free, and meets all applicable regulatory standards for use in food, dairy and milk applications. Producers of food, milk and dairy products require the dependable performance of this tubing in countless filling, draining, transfer and processing applications. Smooth, non-porous and flexible, the Food, Milk, and Dairy tubing promotes a sanitary fluid path by maintaining an interior free of trapped particles, and minimizing potential for bacterial growth. In addition, it is resistant to harsh alkaline cleaners and is not affected by most commonly used sanitizers.
Pacer Global LLC Saint-Gobain - 082 C-Flex TPE Tubing, 0.25'' ID, 0.5'' OD, 0.125'' Wall, 500 Foot Coil, 1/EA - 082-250-4S
Saint-Gobain - 082 C-Flex TPE Tubing, 0.25" ID, 0.5" OD, 0.125" Wall, 500 Foot Coil, 1/EA
KINEX CAPPERS LLC 10' COIL AIR HOSE. INCLUDED IN
10' coil air hose. Included in package price of cappingmachine at no additional charge.
Cole-Parmer C-Flex 374 TPE Tubing, 3/8" ID x 5/8" OD, 50 Ft; Saint Gobain 374-375-4
Excellent heat seal and sterile weld capabilities make it ideal for biopharma applications
Easily meet the critical demands of pharmaceutical and biopharma applications with C-Flex TPE tubing. This moldable and bondable tubing is specifically designed for aseptic welding connections and sealing disconnection; seal or weld before or after sterilization depending on your application requirements.
Excellent flexibility and durability offer prolonged service life in peristaltic pumps and help minimize downtime due to tubing failures. The low permeability characteristics protects sensitive fluids from gas ingress. Translucent tubing enables visual monitoring of the flow, so you can control or adjust the flow during the process.
Cole-Parmer C-Flex 072 TPE Tubing, 1/4" ID x 1/2" OD, 50 Ft; Saint Gobain 072-250-4
Excellent heat seal and sterile weld capabilities make it ideal for biopharmaceutical applications
Easily meet the critical demands of pharmaceutical and biopharmaceutical applications with C-Flex TPE tubing. This moldable and bondable tubing is specifically designed for aseptic welding connections and sealing disconnection; seal or weld before or after sterilization depending on your application requirements.
Excellent flexibility and durability offer prolonged service life in peristaltic pumps and help minimize downtime due to tubing failures. The low permeability characteristics protects sensitive fluids from gas ingress.
Pacer Global LLC Saint-Gobain - SaniTech Ultra-65 Tubing, 0.5'' ID, 0.75'' OD, 0.125'' Wall, 100 Foot Coil, 1/EA - Ultra65-500-4H
Saint-Gobain - SaniTech Ultra-65 Tubing, 0.5" ID, 0.75" OD, 0.125" Wall, 100 Foot Coil, 1/EA
Waters Corp PTFE Tubing, 1/4 in O.D., 0.19 in I.D., 10 ft Length
Waters tubing and fittings are carefully designed to provide leak-free connections, with low dead volume, and minimal band spreading. For best performance, these components must be clean, and designed to work together. The geometry of the ferrule and the conical port that it is used with must match, as well as the diameter of the tube and the fittings. A variety of materials, lengths and diameters are available to provide the flexibility you need when you set up and maintain your system.
- Provides leak-free connections
- Features low dead volume
- Designed for minimal band spreading
- Components are clean and designed to work together for best performance
- Geometry of ferrule and conical port must match
- Diameter of tube and fittings must match
- Variety of materials, lengths, and diameters are available for system setup and maintenance
Waters Corporation Tubing, TFE, 0.149 in. OD, 0.119 in. ID
Waters Corporation TFE tubing is designed for various laboratory applications. This tubing is made from TFE material and features precise dimensions for reliable performance.
- Made from TFE material.
- Outer diameter of 0.149 in.
- Inner diameter of 0.119 in.
- Supplied in a length of 20 ft.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, FEP, 7/16"" ID x 1/2"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Excellent for the transfer of extreme temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, heat resistant, with a low coefficient of friction. Doesn¿t deteriorate with age. Tough, but bends even at -454¿F (-270¿C). Translucent. Certifications: Resin is FDA-compliant (21 CFR 177.1550). Tubing is manufactured in ISO 9001-2008 approved facility. Temperature range: -454 to 400¿F (-270 to 205¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon E-3603, Non-DEHP, 1/2"" ID x 5/8"" OD; 50 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
AVANTOR MASTERFLEX (VWR LLC) Microbore tubing, 0.030"" x 0.090""OD, 100 ft/roll
Microbore Tubing, Translucent, 0.030" x 0.090"OD, 100 ft/roll, Formulation: Tygon ND-100-80Applications: General laboratory and pharmaceutical use, especially with precision injection or dispensing applications. Also excellent with low-flow peristaltic pump applications.Characteristics: Extremely flexible. Non-toxic; nonpyrogenic; biocompatible. Crystal clear.Certifications: Resin meets USP Class VI requirements.Temperature range: ¿25 to 185¿F (¿31 to 85¿C)Sterilize: Autoclave, ethylene oxide, or gamma irradiation.