Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Precision Pump Tubing, Norprene Food, I/P 73; 50 ft
Masterflex Norprene Food Precision pump tubing is formulated to withstand extreme temperatures and will not deteriorate in demanding food and beverage applications. This tubing is compatible with virtually all commercial clears and sanitizers and can be sterilized via autoclave without impacted overall service life. Ideal for food and beverage applications, this tubing complies with FDA, NSF, and 3-A standards.
US Plastic Corporation 1/4" ID x 3/8" OD x 1/16" Wall Tygon S3 E-3603 Laboratory Tubing
This tubing is ideal for general laboratory use, analytical instruments, peristaltic pumps, condensers, incubators, desiccators, as well as gas and drain lines. This tubing offers superior life and minimizes labor and the expense of replacement. It is non-oxidizing and non-contaminating, and less permeable than rubber tubing.
Glass Expansion Contour Flared End PVC Pump Tube 2tag 0.25mm ID Orange/Blue (PKT 6)
Contour Flared End PVC Pump Tube 2tag 0.25mm ID Orange/Blue (PKT 6).Tag Colors: Orange/BlueID mm: 0.25Wall Thickness mm: 0.91OD mm: 2.07Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide. Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon 2375, 3/8"" ID x 1/2"" OD; 50 ft
These transparent tubes are ideal for use with highly aggressive chemicals ¿ acids, bases, ketones, salts, and alcohols. Characteristics include plasticizer free, smoother inner surface, hydrophobic, minimal outgassing, safe disposal via incineration, and nontoxic. NSF 51 Standard compliant and manufactured according to GMP. Temperature range is -108 to 130¿F (-78 to 54¿C). Can be sterilized with ethylene oxide or gamma irradiation.
Chemglass Life Sciences FEP Tubing; 1/2" OD x 3/8" ID x 10ft Long
FEP Tubing; 1/2" OD x 3/8" ID x 10ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 1/32"" ID x 3/32"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
Across International Ai 1/2" Insulated Chiller Translucent Silicone Tubing - 6 Ft
Ai 1/2" insulated chiller silicone tubing. Inner tubing comes in translucent natural color for visual contact with the flow, able to resist temperature from -60C to 100C. Silicon tubing ID: 5/16", OD: 11/16" Insulation ID: 1/2", OD: 1.2"
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Spooled High-Performance Precision Pump Tubing, Platinum-Cured Silicone, L/S 24; 300 ft
Applications: Pharmaceutical, biotech, peristaltic pumping, and food applications Characteristics: Excellent heat resistance, low compression set, odorless, nontoxic, translucent Spooled pump tubing provides continuous lengths of pump tubing on convenient, manageable spools that are easy to transport and require less storage space than the equivalent amount of individual tubing coils.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Tygon ND-100-80 Microbore, 0.020"" ID x 0.060"" OD; 100 ft
Formulation: Tygon ND-100-80 Applications: General laboratory and pharmaceutical use, especially with precision injection or dispensing applications. Also excellent with low-flow peristaltic pump applications. Characteristics: Extremely flexible. Non-toxic; nonpyrogenic; biocompatible. Crystal clear. Certifications: Resin meets USP Class VI requirements. Temperature range: -25 to 185¿F (-31 to 85¿C) Sterilize: Autoclave, ethylene oxide, or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Spooled High-Performance Precision Pump Tubing, Platinum-Cured Silicone, L/S 36; 100 ft
Applications: Pharmaceutical, biotech, peristaltic pumping, and food applications Characteristics: Excellent heat resistance, low compression set, odorless, nontoxic, translucent Spooled pump tubing provides continuous lengths of pump tubing on convenient, manageable spools that are easy to transport and require less storage space than the equivalent amount of individual tubing coils.
Accuflow Systems Saint-Gobain Vincon Flexible PVC Tubing, 3/8 in ID, 100 ft
Versilon Vincon flexible PVC tubing is a clear, flexible fluid-transfer tubing formulated with a non-DEHP plasticizer for broad chemical compatibility and extended flex life. Supplied in 100 ft coils, it is suitable for laboratory and industrial fluid-handling applications such as peristaltic pumps, reagent transfer, and detergent handling.
- Clear flexible PVC material with non-DEHP plasticizer.
- Internal diameter 3/8 in, outer diameter 1/2 in, wall thickness 1/16 in.
- Coil length 100 ft.
- Maximum recommended operating temperature 74 °C (165 °F).
- Low temperature flexibility to -43 °C (-45 °F).
- Durometer hardness Shore A 67; tensile strength 2,450 psi (16.9 MPa).
- Suitable for peristaltic pumps, fluid transfer, and detergent handling.
New Age Industries Inc ADVANTAFLEX SZ 16 TUBING, 500'
AdvantaFlex Size 16 Tubing, 500' spool Weldable, Autoclaveable, I.D. 0.125in, Wall 0.062in, O.D. 0.25in, PSI 30
AVANTOR MASTERFLEX (VWR LLC) Tubing, High-Density Polyethylene (HDPE) , 3/8 x 1/2"", 100 ft/pack
High-Density Polyethylene (HDPE) Tubing, 3/8 x 1/2", 100 ft/pack, Applications: General-purpose lab and industrial use.Characteristics: Low moisture absorption, good chemical and corrosion-resistance, high tensile strength.Certifications: None.Temperature range: ¿103 to 151¿F (¿75 to 66¿C)Sterilize: Autoclave.
Accuflow Systems Saint-Gobain Tygon Tubing, Thermoplastic, 5/16 in ID, 50 ft
Saint-Gobain Tygon E-3603 tubing is a clear, flexible thermoplastic tubing designed for medical, diagnostic, and laboratory fluid handling where chemical compatibility and low extractables are required. It provides visual flow inspection, chemical resistance to many inorganic reagents, and an extra-heavy wall construction for vacuum and pressure applications.
- Clear thermoplastic construction for visual inspection and low extractables.
- Nominal inside diameter 5/16 in (7.9 mm), outside diameter 1/2 in (12.7 mm), wall thickness 3/32 in (2.4 mm), length 50 ft (15 m).
- Maximum recommended operating temperature 165 °F (74 °C); brittle temperature -51 °F (-46 °C).
- Maximum working pressure at 73 °F: 23 psi (1.6 bar); vacuum rating 29.9 inHg (760 mmHg).
- BPA-free and phthalate-free formulation to minimize extractables.
- Extra-heavy wall construction for improved durability and vacuum resistance.