Tubing Connectors and Fittings
Cole-Parmer 3112 Methacrylate Balls, 3/8" (9.5 mm); 100/PK
3112 Methacrylate Balls, 3/8" (9.5 mm); 100/PK
NANOPROBES INC NanoVan, 5 mL
A 2% Vanadium negative stain recommended for use with Nanogold or other applications where a low atomic number light stain is needed.
Chemglass Life Sciences Adapter, Outer to 14/20 Inner, Vacuum, Stopcock
Adapter, Outer to 14/20 Inner, Vacuum, Stopcock. Vacuum Adapter has a ground glass standard taper outer joint on top that provides a convenient leak free way to connect to the OP-6602, OP-6603 and OP-6604 disposable long stem filter funnels and a taper inner joint or a vial. The unique design of the long stem filter funnel and vacuum adapter makes it unnecessary to clean after each use. The 2mm PTFE stopcock between the outer joint and standard taper inner permits control of the vacuum source. Hose connection is 10mm OD at the largest serration. U.S. patent pending.
Chemglass Life Sciences Distilling Adapter, Process Reactor, 45/50, Style "A", 14mm Stpk
Distilling Adapter, Process Reactor, 45/50, Style "A", 14mm Stopcock. Similar to CG-1235, but with the lower stopcock replaced with a 0-14mm treaded valve having Perfluoro o-rings and a ¿¿ O.D. glass distillate takeoff for use with PFA compression tubing fittings. Adapter has two top outer joints and a lower inner. Adapter has a lower inner joint and two top outer joints.
Chemglass Life Sciences Style "A" Gas Inlet Adapter, 45/50
Style "A" Gas Inlet Adapter, 45/50. Gas inlet adapter with 45/50 inner joint, is used for connection of the gas source to the lower reservoir. Inlet connection is 1/2 Swagelok tubing for use with CG-1975-20 compression fitting. Adapter has a large 25mm x 70mm Extra Coarse Fritted section that will disperse the gas sub-surface into the scrubbing fluid. This adapter is the best for hard to scrub gases.
Chemglass Life Sciences PTFE Standard Taper Adapter, 24/40 Outer, Center Neck, 1/2" Male NPT
PTFE Standard Taper Adapter, 24/40 Outer, Center Neck, 1/2" Male NPT. For center and vertical side necks of the CG-1945-T-50 7-Neck PTFE Reaction Vessel lid. Image shown is fully assembled Reaction Vessel lid.
Chemglass Life Sciences Shower Head Adapter
Shower Head Adapter. Adapter attaches to the top of the exhaust gas outlet column and has an all glass shower head to disperse the scrubbing fluid down into the absorption column. Inlet connection is 1/2 Swagelok tubing for use with CG-1975-20 compression fitting.
Analytical Sales & Services Thread Adapter PP GL45 Cap To Gl38 Bottle
This item has a minimum order quantity of 2 per supplier requirements. THRD ADAP PP GL45-GL38 BTL
Glass Expansion UniFit with 1/16 OD X 0.75mm ID x 700mm long sample tube (PKT. 3).
UniFit Connector with 0.75mm ID x 1.6mm (1/16”) OD x 700mm long tubing sample tube (PKT 3). Package of 3 replacement reductant inlet port lines for Glass Expansion’s HydraMist spray chamber. This consumable part should be replaced at a frequency of about every 6 months to ensure optimum sample flow.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
INDIANA FLUID SYSTEMS TECHNOLOGIES SS TUBE FITTING 1/4IN M NPT
NC1888936 SS TUBE FITTING 1/4IN M NPT
Chemglass Life Sciences Adapter, Air Inlet/Outlet, M6
Adapter, Air Inlet/Outlet, 4mm Tubing to fit #16 Pump Tubing. Adapter can be used as a gas outlet pipe in lieu of a condenser in applications where the aeration rate or temperature is low or for short term batch applications. More often, this pipe is used to provide overlay aeration. Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors. Thread size: M6. Hose Connection OD: 4mm. Fits Tubing Size 16. Replacement Silicone O-Ring: CLS-1705-010.
IDEX Health & Science Upchurch LUER FEMALE PP 1/8IN THRUHOLE
Idex Threaded Luer Polypropylene Adapter, Diameter Inner: 0.125 mm, For Use With: Female to Male, Natural, Luer Adapter, Temperature Max: 40 deg.C
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Straight, Hose Barb Reducer, 3/16"" ID x 1/8"" ID; 10/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Straight, Hose Barb Reducer, 1/4"" ID x 3/16"" ID; 100/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Straight, Hose Barb Reducer, 1"" ID x 3/4"" ID; 5/PK
These economical straight barbed reducing fittings easily connect fluid paths without the use of tools. Just slip your flexible tubing or hose onto the barb to create a secure seal.