Tubing Connectors and Fittings
Chemglass Life Sciences 24/40 Adapter, Connecting, Height 80mm
24/40 Adapter, Connecting, Height 80mm. Adapter has a luer outer on top and a lower standard taper inner joint.
Chemglass Life Sciences 24/40 Inner Joint, Extended Drip Tube, Tubing OD: Lower: 12mm, Upper: 20mm
RxnHub Syringe Pump Tubing Kit to Include: 20' of 1/8" OD Tubing, 12 Nuts (1/4-28, 6 short and 6 long) and 12 Ferrules.
Chemglass Life Sciences 24/40 Outer Joint with Hooks, on 28mm OD x 2mm W tubing
24/40 Outer Joint with Hooks, on 28mm OD x 2mm W tubing. Outer joint with two hooks 180 apart just below the grind.
Chemglass Life Sciences Secondary Valve Kit, All PTFE Ball Valve with 3/4" compression fittings, for use with Air Operated Drain Valves
Secondary Valve Kit, All PTFE Ball Valve with 3/4" compression fittings,for use with Air Operated Drain Valves. This kit will allow for emergency shut-off of the reactor contents in the unlikely event of valve failure.
Med Vet International Christmas Tree Connector, J0595C, 2 Pack
Dual fitting polypropylene. One end is a female DISS connector the other a barbed connector. One suggested use is from oxygen regulator connecting oxygen tubing to rescusitator bag. 2/pkg.
MSC Value Collection Roller Chain Link, Carbon Steel, 60H, Single Strand Chain
This roller chain link is constructed from carbon steel and designed for use with single strand chains, offering reliable performance for various applications.
- Designed for use with single strand chain
- Features an ANSI number of 60H
- Made from durable carbon steel
Chemglass Life Sciences Adapter, M16 x 1 Male to 1/4 in Male NPT, Stainless Steel (for Huber circulator fittings)
Chemglass stainless steel adapter that converts an M16 x 1 male thread to a 1/4 in male NPT connection for laboratory circulator and fluid transfer applications. It is commonly used with circulator fittings to connect equipment and tubing.
- Converts M16 x 1 male thread to 1/4 in male NPT connection.
- Made from stainless steel for corrosion resistance and durability.
- Compatible with laboratory circulator fittings and fluid transfer systems.
- Compact form factor for easy installation in tight plumbing setups.
- Sold individually for replacement or spare parts needs.
Chemglass Life Sciences Chemglass 5 L Two-Neck Receiving Flask, 45/50 Ground-Glass Joints (for 10 L Reactor System)
The Chemglass 5 L two-neck receiving flask is a glass vessel designed to collect distillate or reaction products in reactor and distillation setups. It features two 45/50 ground-glass joints and is specified as the receiving flask for 10 L reactor/distillation systems.
- 5 L capacity for collecting distillate and reaction products.
- Two necks to accommodate condensers, adapters, or sensors.
- 45/50 ground-glass joints for secure, standard connections.
- Designed for use with 10 L reactor and distillation systems.
- Suitable for standard laboratory distillation and reactor receiving applications.
AVANTOR MASTERFLEX (VWR LLC) John Guest Male Pipe Adapters, 1/4 X 1/4, 10 Per Pack
A single fitting offers secure connections and quick disconnection¿no need to purchase two fitting halves. Simply push tubing past the O-ring to the internal tube stop¿steel teeth on the collet grip tubing for leakproof connections. To disconnect, press collet against fitting body to disengage steel teeth¿ tubing slides right out. Fittings work with semirigid plastic (polypropylene, polyethylene, nylon) and soft metal (brass, copper, mild steel) tubing. To connect flexible tubing such as Tygon or silicone, order soft tube supports.
Microsolv Technology Corporation Tubing Connector Fittings, Low Pressure, 1/16", Polypropylene, Green with 1/4-28 Screw Threads, for use with flanged, polymeric tubing. 10/PK.
These "Male Nuts" are used to connect polymeric tubing in the low pressures zones of HPLC systems and other low pressure, fluidic uses. Tubing must be flanged and Washers are required to work properly, and sold separately.
Microsolv Technology Corporation Tubing Connector Fittings, Low Pressure, 1/16", Delrin, Black with 1/4-28 Screw Threads, for use with Flange Free, polymeric tubing. 10/PK.
These "Male Nuts" are used to connect polymeric tubing in the low pressures zones of HPLC systems and other low pressure, fluidic uses. Tubing must NOT be flanged (flangeless) and Ferrules are required to work properly which are sold separately. Delrin™ (Polyoxymethylene) material is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. It is excellent for use with HPLC solvents but is sensitive to both chlorine and acid hydrolysis.
Microsolv Technology Corporation Tubing Connector Fittings, Low Pressure, 1/8", Delrin, Blue with 1/4-28 Screw Threads, for use with Flange Free, polymeric tubing. 10/PK.
These "Male Nuts" are used to connect polymeric tubing in the low pressures zones of HPLC systems and other low pressure, fluidic uses. Tubing must NOT be flanged (flangeless) and Ferrules are required to work properly which are sold separately. Delrin™ (Polyoxymethylene) material is an engineering thermoplastic used in precision parts requiring high stiffness, low friction, and excellent dimensional stability. It is excellent for use with HPLC solvents but is sensitive to both chlorine and acid hydrolysis.