Chromatography Supplies
Cole-Parmer Idex Flangeless Male Nut, Standard Knurl, Natural PFA, 1/16" OD Tubing, 1/4-28 Flat-Bottom; 1/EA
Just slip the nut and ferrule over the tubing and finger tighten the assembly into your receiving port. Unlike the time required to flange tubing, it only takes a few seconds to change the components. Select from various ferrule materials to suit your application.
Thermo Scientific Advanced nanoViper Fingertight Fitting Systems | | 1 EA
Ensure optimal separations and maximize your liquid chromatography LC instrument performance with virtually zero-dead-volume connections. Advanced capillaries extend the use case based on application requirements.
IDEX Health & Science Upchurch TEE PEEK .050 THRU HOLE
Idex Low-Pressure PEEK Tees, Diameter Inner: 1.25 mm, 0.050 in., Union, Pressure Rating: 1000 psi
Ace Glass, Inc. Glass filled PTFE lock nut designed for 6mm OD Trubore stirring shaft bearing assembly.
6mm glass-filled PTFE lock nut, for use with self-aligning, lubricant free PTFE Trubore bearing stir shaft assembly. Use with 6mm O.D. stainless steel or polished glass shafts.
Next Advance Inc KASIL FORMAMIDE FRIT KIT
Kit to create frits in capillaries. Includes formamide, Kasil-1, Kasil-1624 and a cleaving tool.
IDEX HEALTH & SCIENCE UPCHURCH FLANGLESS FERRULE FOR 1/16 OD
NC0885237 FLANGLESS FERRULE FOR 1/16 OD
IDEX HEALTH & SCIENCE UPCHURCH SPRFLANGELS FERR ASSY 1/32 GRN
NC3233011 SPRFLANGELS FERR ASSY 1/32 GRN
Trajan Scientific 12M X 0.22MM ID - BP1 0.25UM
Trajan BP1 GC Capillary Columns, Diameter Inner: 0.22 mm, Film Thickness: 0.25 mm, Length: 12 mm, Stationary Phase: 100% Dimethyl Polysiloxane, Max. Temperature: 360 deg.C, Quantity: 1 Each, Temperature Range: -60 deg.C to +360 deg.C
Bioworld IDA CHELATING SEPAROPOREA
IDA CHELATING SEPAROPORE (AGAROSE) (METAL-FREE): Metal-Chelating Separopore Affinity matrix for proteins with metal bnding properties with exposed amino acids such as histidine and cysteine.; Can be charged with Zn, Cu, Co and Ni metal i...
Shimadzu Scientific Instruments MarvelXACT Stainless Steel 125um ID X 600mm Tubing w/Fittings
MarvelXACT is comprised of flexible 1/32" OD stainless steel tubing for easy routing through the LC system and can be connected and disconnected multiple times. The 1/16" tubing ends and integrated fittings are compatible with any 10-32 coned port, and are finger-tight — no tool required for UHPLC connections up to 19,000 psi. The fitting produces a haptic "click" feedback when it reaches the optimum torque to eliminate the risk of under- or over-tightening. The PEEK tubing end seals at the port bottom which eliminates dead volume and minimizes carryover risk, peak tailing, and peak broadening. Tubing volume: 7.363uL.