Chromatography Tubing
Microsolv Technology Corporation Tubing, PEEK, 0.0025" ID, 1/16" OD, Super-T Grade, Natural Color. 5 Meter Roll. 1 EA.
This Super-T™ grade ( Premium ), PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The tubing is a natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.025mm. Color Code: Natural, ( No Stripe ) for 0.0025" ( 0.064mm ) ID. Pressure rating: 6300 psi.
Microsolv Technology Corporation Tubing Holder, Clamp, for 1/8" or 1/16" OD Tubing. Blue. 10/PK.
This Tubing Holder will hold 1/16" or 1/8" OD Tubing in place on a beaker, bottle or any thin walled vessel. The spring loaded holder is excellent while draining or siphoning or filling with tubing. Equipped with 2 holes, one hole accommodates 1/16" and the other accommodates 1/8" tubing.
IDEX HEALTH & SCIENCE UPCHURCH VHP MICROCROSS 360UM OD TUBING
NC0771923 VHP MICROCROSS 360UM OD TUBING
Microsolv Technology Corporation Tubing, PEEK, Pre-Cut, 0.005" ID, 1/16th" OD, Super-T Grade, Red Stripe, 20cm Long. 5 PK.
Properly cutting tubing is one of the most difficult tasks in a chromatography laboratory. These Pre-Cut PEEK Tubes are the perfect solution. This Super-T™ grade ( Premium ), PEEK tubing is extruded from virgin PEEK ( Victrex ) material without adding any additives. The broken red stripes are added only to the outside of the tubing, leaving the interior all natural PEEK which eliminates leachables due to color. The internal and outer dimensional tolerances of this tubing is +/- 0.025mm. Color Code: Red, Stripes for 0.005" ( 0.13mm ) ID. Pressure rating: 6100 psi.
Microsolv Technology Corporation Tubing, ETFE, 0.020" ID, 1/16" OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv, ETFE ( Tefzel ) Tubing, is extruded from virgin ETFE and additives are not added to the original material. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. ETFE tubing is chemically inert except for some halogenated compounds and has low permeability compared with PTFE tubing. Internal and Outer Dimensional Tolerance: +/- 0.10mm Color: Natural ETFE, Translucent ID: 0.025" ( 0.51mm ) Pressure rating: 2175 psi.
Trajan Scientific PEEKTUBE 1/16 ODX0.005 IDX10FT
Trajan Scientific and Medical PEEK Tubing, 1/16 in. O.D., 10 ft, Red, Diameter Inner: 0.005 in., Diameter Outer: 1/16 in., Overall Length: 10 ft., Maximum Pressure: 7000 psi (483 bar), Max. Operating Temperature: 100 deg.C, pH Range: 2 to 14
Advanced Materials Technology MARVELXACT PLS 100 X 350MM
Advanced Materials Technology’s MarvelXACT finger-tight UHPLC connectors with volume definitions easily identifies dispersion volume contribution. Haptic “click” indicates optimum torque and zero dead volume connection. Connector and tubing for both pre and post column installation
Trajan Scientific Tubing Fused Silica FST Medical 1/EA
430 m OD x 320 m ID x 2 m length deactivated fused silica tubing
