HPLC Columns
Advanced Materials Technology HALO 90 PHENYL-HEXYL 5
HALO Phenyl-Hexyl columns made with innovative Fused-Core particle technology for excellent reproducibility and column lifetimes provide fast, high resolution separations. Available in three particle sizes and a wide range of column dimensions, HALO 90 Å Phenyl-Hexyl columns are optimized for high performance in HPLC, UHPLC, and LCMS small molecule applications.
Waters Corp Torus OBD Preparative Column, 2-PIC, 5 μm, 130 Å, 30 mm X 75 mm
This column enables the scaling of SuperCritical Fluid (SFC) from analytical to preparative applications. It is part of the Torus column chemistries, which offer a broad range of selectivity, including 2-PIC, DIOL, DEA, and 1-AA. These columns are available in both analytical (1.7 μm and 5 μm) and preparative (5 μm) formats.
- Offers a wide range of selectivity through various column chemistries (2-PIC, DIOL, DEA, 1-AA).
- Supports SFC scaling from analytical to preparative applications.
- Available in different particle sizes and formats to suit various analytical and preparative needs.
- Designed as an OBD (Optimum Bed Density) preparative column.
Mac-Mod Evosphere C18/PFP, 100 Å, 3 µm, 0.5 x 150 mm Monodisperse Fully Porous Particle HPLC Column
Evosphere UHPLC and HPLC columns are 100 A Monodispersed Fully Porous Silica-based columns designed to combine the benefits of Fully Porous and Core-Shell particle technology into an improved particle design and morphology that brings cutting-edge loading capacity to ultra-high-resolution particle columns. The Monodispersed Particles provide similar efficiency to Core-Shell products when comparing them directly via particle size matching and significantly increase loadability which allows ultra-high resolution analytical separations to scale to preparative separations for isolation work if needed. The bonded phase chemistries are exciting as well to maximize selectivity with novel C12 bonded phase, 2 multi-modal C18/AR, and C18/PFP bonded phases, an extended and stabilized phenyl funtionality in the Diphenyl bonded phase, a polar endcapped AQUA phase, a Phenyl-Hexyl phase, a propyl PFP phase and the RP18-Amide bonded phases which is great for doing bases at low pH.
Waters Corp SunFire OBD Prep Column, C18, 10 μm, 100 Å, 50 mm X 50 mm
SunFire C18 columns are used for general purpose method development at low pH. The C18 ligand is highly retentive, especially for basic compounds, and is ideally suited for purification and impurity profile assays.
- Used for general purpose method development at low pH.
- The C18 ligand is highly retentive, especially for basic compounds.
- Ideally suited for purification and impurity profile assays.
- Chemistry: C18
- Separation mode: Reversed Phase
- Particle size: 10 μm
- Pore size: 100 Å
- Inner diameter: 50 mm
- Length: 50 mm
- Maximum pressure: 6000 psi (415 Bar)
- Temperature limits: 45 °C
- pH range: 2 pH to 8 pH
Waters Corp Preparative Column, SCX, 10 × 250 mm, 5 μm, 80Å
The Waters Spherisorb SCX OBD Preparative Column is engineered using advanced Optimum Bed Density (OBD) Technology to deliver reliable chromatographic performance. These columns are designed for preparative applications, ensuring efficient separations with consistent results.
- Manufactured with patented Optimum Bed Density (OBD) technology.
- Features SCX chemistry for robust separations.
- Dimensions of 10 × 250 mm for preparative scale.
- Utilizes a 5 μm particle size for optimal resolution.
- Pore size of 80Å.
- Surface area of 220 m2/g.
Advanced Materials Technology HALO 90 Å PCS C18, 2 µm, 2.1 mm x 150 mm
Built upon proven Fused-Core technology for speed and efficiency, the HALO PCS column products are positively charged surface chemistries designed to deliver improved peak shapes for basic compounds observed with standard Phenyl-Hexyl chemistry. Ideal for use with low ionic strength mobile phases, HALO PCS maintains peak symmetry at higher loading capacities and provides alternate selectivities from Phenyl-Hexyl bonded phases. The columns are optimized to deliver performance for reproducible, high efficiency LC and LCMS separations.
Waters Corp Column, C8, 90Å, 1.6 μm, 3 x 150 mm
These C8 columns are designed for general purpose method development under low pH test conditions. The C8 ligand is preferred for some assays because it is less hydrophobic and therefore less retentive compared to C18 phases.
- Separation mode: Reversed phase
- Particle size: 1.6 μm
- Pore size: 90 Å
- Inner diameter: 3 mm
- Length: 150 mm
- pH range: 2 to 8 pH
- Maximum pressure: 18000 psi (1240 Bar)
- Temperature limits: 45 °C
- Particle technology: Solid core
- Units per package: 3 pk
Waters Corp ACQUITY Premier Oligonucleotide C18 Column, 130 Å, 1.7 μm, 2.1 mm x 150 mm
ACQUITY Premier Oligonucleotide BEH C18 Columns separate synthetic oligonucleotides via ion-pairing reversed-phase (IP-RP) chromatography. QC tested with Waters MassPrep OST standards for repeatable performance. These MaxPeak Premier columns feature an ultra-low non-adsorptive surface, enhancing sensitivity and reproducibility for metal-sensitive analytes.
- Separates synthetic oligonucleotides via ion-pairing reversed-phase chromatography.
- QC tested with MassPrep OST standards for repeatable performance.
- MaxPeak Premier technology for ultra-low non-adsorptive surface.
- Maximizes sensitivity and reproducibility for metal-sensitive analytes.
- Integrated, replaceable 5 mm pre-column extends analytical column life.
- Pre-column protects without dispersion or impacting resolution.
- VanGuard FIT Cartridge replacements use same qualified sorbent.
Waters Corp XBridge Protein BEH SEC Column, 200Å, 2.5 μm, 4.6 mm X 300 mm
This XBridge Protein BEH SEC Column features 2.5 μm Ethylene Bridged Hybrid (BEH) particles and a diol-bonded surface coating. It is designed for separating proteins from 10,000 to 450,000 Daltons, offering consistent performance, exceptional pH stability, and great particle efficiency. This column is suitable for LC-MS assays, quality-control, and UPLC technology transitions.
- Particle size: 2.5 μm
- Pore size: 200 Å
- Dimensions: 4.6 mm X 300 mm
- Molecular weight range: 10,000 to 450,000 Daltons
- pH range: 2.5 to 8
- Temperature limits: 60°C
- Maximum pressure: 6,500 psi (448 Bar)
- Compatible with UHPLC, UPLC, and HPLC systems
Advanced Materials Technology HALO 160 ES-C18 2.7 10.
HALO BIOCLASS ES-C18 Peptide columns made with innovative Fused-Core particle technology are ideal for both ultrafast and ultrahigh resolution separations of peptides and polypeptides up to 20 kDa. HALO peptide columns offer comparable peak capacity to sub-2 μm non-core columns at 40–50% back pressure (2.7 μm), and 20% higher peak capacity than sub-2 μm non-core columns at comparable back pressure (2 μm). HALO 160 Å peptide columns are optimized for high performance in HPLC, UHPLC, and LCMS peptide applications.
Mac-Mod Princeton PPU (Propylpyridyl urea) 100 Å, 10 µm, 4.6 x 75 mm SFC Column
Princeton Chromatography Achiral SFC columns are designed and manufactured in the US, well known for innovating novel and robust workhorse phase chemistries, for the analysis of achiral SFC applications. Princeton designs myriad phase chemistries to improve the selectivity and efficiency of SFC analysis. Known for originally innovating the 2-EP phase chemistry, explore what Princeton has to offer. Columns are available from analytical to preparative sizes and are available in a wide range of pore sizes, particle sizes, column ID's and lengths. If you do not see something that you want, please just ask!
Mac-Mod Princeton 4-Ethylpyridine 60 Å, 1.8 µm, 4.6 x 100 mm SFC Column
Princeton Chromatography Achiral SFC columns are designed and manufactured in the US, well known for innovating novel and robust workhorse phase chemistries, for the analysis of achiral SFC applications. Princeton designs myriad phase chemistries to improve the selectivity and efficiency of SFC analysis. Known for originally innovating the 2-EP phase chemistry, explore what Princeton has to offer. Columns are available from analytical to preparative sizes and are available in a wide range of pore sizes, particle sizes, column ID's and lengths. If you do not see something that you want, please just ask!