Air-Purifying Respirator Cartridges and Filters
Air-purifying respirator cartridges and filters are installed in reusable half-mask or full-facepiece respirators to provide protection from airborne contaminants. Products are designed to protect against a variety of individual contaminants or combinations of contaminants, including dusts, particles, mists, aerosols, fumes, gases, and/or vapors.
Some products protect against both particulate and gaseous contaminants, however, there is no single filter and cartridge combination that protects against all substances.
Correct product selection depends on the environment(s) in which the product will be used and the type(s) of hazard(s) or risk(s) expected in the selected environment(s). NIOSH-rated cartridges and canisters use a color-coding system for secondary identification.
Product service life depends on many factors, including environmental conditions, breathing rate, cartridge filtering capacity, and the quantity of contaminants in the air. Regulatory compliance details for each filter and filter/cartridge package can be obtained at the individual product level and should be carefully scrutinized during selection.
- (4)
- (3)
- (7)
- (12)
- (1)
- (1)
- (3)
- (2)
- (1)
- (44)
- (24)
- (1)
- (12)
- (1)
- (1)
- (1)
- (1)
- (8)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (3)
- (1)
- (8)
- (1)
- (1)
- (2)
- (2)
- (1)
- (1)
- (1)
- (1)
- (41)
- (1)
- (1)
- (2)
- (1)
- (2)
- (2)
- (27)
- (1)
- (7)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (2)
- (1)
- (4)
- (23)
- (1)
- (1)
- (1)
- (4)
- (8)
- (8)
- (13)
- (1)
- (2)
- (4)
- (1)
- (14)
- (1)
- (6)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (2)
- (2)
- (2)
- (2)
- (2)
- (1)
- (1)
- (1)
- (2)
- (10)
- (9)
- (3)
- (1)
- (8)
- (32)
- (5)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (6)
- (42)
- (3)
- (4)
- (1)
- (1)
Filtered Search Results
| For Use With (Equipment) | 3M™ half and full facepiece 6000, 7000, ff-400 series with bayonet filter holders |
|---|---|
| Quantity | 60/Cs. |
| Certifications/Compliance | NIOSH |
3M™ 6000 Series Cartridges
NIOSH-approved cartridges for use with 3M™ full and half facepiece respirators 6000, 7000 and FF-400 Series.
| For Use With (Equipment) | 3M™ half and full facepiece 6000, 7000, ff-400 series respirators |
|---|---|
| Product Type | Cartridge |
| Connection Type | Bayonet |
| Quantity | 60/Cs. |
| Certifications (NIOSH) | NIOSH-approved |
3M™ Responder Filter Media Canister
NIOSH-approved for respiratory protection against CN, CS, and as a P100 particulate filter. May be used for exposure to tear gases and pepper spray during riot and crowd control operations.
MSA™ CBRN Canister for Millennium and Ultra Elite Facepieces
Canisters are compatible with MSA Millennium gas masks and MSA Ultra Elite CBRN gas masks.
3M™ Mercury Vapor/Organic Vapor/Acid Gas Cartridges/Filters 60927, P100
NIOSH-approved for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor and hydrogen sulfide. NIOSH-approved P100 particulate filter for respiratory protection against certain oil and non-oil based particulates.
3M™ Mercury Vapor/Organic Vapor/Acid Gas Cartridges 6007
NIOSH-approved cartridge for protection against mercury vapor, chlorine, sulfur dioxide, organic vapor and hydrogen sulfide.
MSA™ Advantage™ 1000 Riot Control Canisters, Pack of 6
Bayonet-type CBA/RCA canisters for use with Advantage 1000 and 3200 gas mask respirators.
MSA™ Comfo™ Cartridges
Particulate, chemical, and combination cartridges for use with Comfo Classic™, Comfo Elite™, Ultra-Twin™ and Ultra Elite™ respirators
| For Use With (Equipment) | Comfo classic™, ultra-twin™, ultra elite twin™ cartridge and duo-twin™ respirator and certain half mask and full face advantage™ respirator |
|---|---|
| Product Type | Comfo™ Respirator Cartridge |
| Certifications/Compliance | NIOSH 42CFR, Part 84 |
| For Use With (Application) | Asbestos abatement, painting, sanding, grinding, welding |
| Cartridge Type | Filter Cartridge |
|---|---|
| Height (Metric) | 5.8 cm |
| Dimensions (L x W x H) | 3.4 x 4.8 x 2.3 in. (8.6 x 12.1 x 5.8 cm) |
| Width (English) | 4.8 in. |
| Length (Metric) | 8.6 cm |
| For Use With (Equipment) | 3M™ respirator 5000 series or 3M™ cartridge 6000 series with 3M™ adapter 502, 3M™ facepiece 6000 series, or 3M™ facepiece 7000 series with bayonet filter holders |
| Product Type | Particulate Filter |
| Color | Magenta |
| Length (English) | 3.4 in. |
| Certifications/Compliance | NIOSH |
| For Use With (Application) | Demolition, facility maintenance, remediation, sanding |
| Width (Metric) | 12.1 cm |
| Height (English) | 2.3 in. |
3M™ Filter/Adapter/Retainer Kit 6N01, N95
Start-up kit contains 40 3M™ Particulate Filters 5N11, N95; 20 3M™ 501 Filter Retainers and 20 3M™ 603 Filter Adapters. The kit is enough for 10 separate users to have 1 initial filter pair and 1 filter pair change out.
3M™ N95 and P95 Particulate Filters (5000/6000 Series)
NIOSH approved for environments containing certain non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.
| Cartridge Type | Filter Cartridge |
|---|---|
| Height (Metric) | 8.6 cm |
| Length (Metric) | 10.6 cm |
| For Use With (Equipment) | 3M™ respirator 5000 series or 3M™ cartridge 6000 series or 3M™ filter adapter 603 and 3M™ filter retainer 501 |
| Length (English) | 4.2 in. |
| Certifications/Compliance | NIOSH |
| Height (English) | 3.4 in. |