Probes and Electrodes
Broadley James Corporation OXYPROBE ELECTROLYTE 25ML
In critical biotech applications the electrolyte should be changed after every run to yield accurate results. The shelf life of this solution is approximately 2 years. Lot numbers and expiration dates are clearly marked on each bottle for tracking.
Hach Company Sension+ 5044 Reference Electrode for use with Ion Selective Electrodes ISE (ISE)
Sension+ 5044 is a double junction reference electrode with a glass body and internal gel electrolyte and 0.1M lithium acetate salt bridge. The reference probe has a large, replaceable ceramic diaphragm. The 5044 has a fixed 1 meter cable and banana connector for laboratory use with the Hach Sension+ MM374 Multimeter. The 5044 with lithium acetate electrolyte is recommended for use with all Sension+ half-cell ion selective electrodes (ISE) in drinking water, wastewater and general water quality applications.
Hach Company sensION+ 5055 portable ORP electrode for general purpose applications
sensION+ 5055 is a combination platinum ORP electrode with a polycarbonate body and non-refillable gel-electrolyte reference. The 5055 has a fixed 1 meter cable and MP5 connector dedicated for use with Hach sensION+ Portable pH (mV) meters. The 5055 is ideal for oxidation-reduction potential (ORP) measurements in general aqueous applications.
Hach Company Sension+ 5059 portable multi-parameter electrode: pH, conductivity and temperature
Sension+ 5059 is a combination multi-parameter electrode for determination of pH, conductivity and temperature. The 5059 has a plastic body, non-refillable gel reference electrolyte and built-in temperature sensor. The electrode has a fixed 1 meter cable and MP8 connector dedicated for use with Hach Sension+ MM150 portable meters. The 5059 has a ceramic pin reference junction and glass (pH); platinum (conductivity); and Pt1000 (temperature) sensors. It is ideal for pH, conductivity and temperature measurements in general aqueous applications.
Hach Company Sension+ 5052T portable combination pH electrode for "difficult" (LIS, high temperature) applications
Sension+ 5052T is a combination pH electrode with a glass body (protected by a plastic shroud), non-refillable gel reference electrolyte and built-in temperature sensor. The 5052T has a fixed 1 meter cable and MP5 connector dedicated for use with Hach Sension+ Portable pH meters. The 5052T has a large porous annular PTFE junction and is ideal for pH measurements in low ionic strength, high temperature, viscous, or other “difficult” sample types.
Hach Company Radiometer Analytical CDC241 Conductivity Cell (2-pole Pt sensor, k = 1.0 cm-1, glass body, screw cap)
The Radiometer CDC241 is a 2-pole conductivity cell with non-platinized, platinum sensor (k = 1.0 cm-1) and glass body. The CDC241 sensor's 2 platinum plate design is ideal for continuous measurement or titration in viscous media. The CDC241 has a screw cap connection and requires the CL136 cable (part no. A94L136) for compatibility with Radiometer Analytical CDM210/230/92 conductivity meters or the CL143 cable (part no. A94L143) for compatibilty with Hach sensION+ benchtop conductivity meters.