Animal Surgical Equipment Accessories
Instech Mouse tail vein cannula, 29ga, 5cm PE-10 tube, PinPort and injector
The Instech C10SS-MTV1826P is a 29-gauge (29ga) stainless steel tail vein cannula designed for manual dosing or sampling in restrained mice. This model features a sharp needle tip for direct vessel access and a 2.0 in (5 cm) segment of PE-10 extension tubing. To facilitate a low-dead-volume closed system, it includes an integrated PinPort™ and an injector for aseptic access. Because it uses a sharp stainless steel needle, it is intended for immediate experimental use rather than long-term implantation. Each unit is individually packaged and EtO sterilized to maintain surgical-grade standards for laboratory research.
Features
- Vessel Application: Mouse tail vein
- Needle Gauge: 29ga (0.3mm OD) stainless
- Tubing: 2.0 in (5 cm) PE-10
- Access: Integrated PinPort™ and injector
- Tip Design: Sharp (non-implantable)
- Sterilization: Individually packaged, EtO
Innovative Reseach Of America 17B-ESTRADIOL 0.25MG/PELLET,50
17ß-Estradiol 0.25mg/pellet 90 Day Release - 50 pellets
Alzet ALZET Osmotic Pumps, Model 2006: 200 µl Volume, 0.15 µl/hr Release Rate, 42 Days Duration - for Orders of 10-40 Pumps
ALZET Osmotic Pumps are small infusion devices for accurate, continuous administration of test agents in unrestrained lab animals. They offer a convenient alternative for long-term dosing compared to stress-inducing methods such as injections and gavage. Pumps are sold empty and easily filled with the test agent via syringe. Their pumping rate is determined at manufacture and is not affected by the molecular weight of the test agent. Pumps are implanted subcutaneously or intraperitoneally for systemic delivery, or can be attached to an ALZET catheter for targeted delivery such as to the brafin, vasculature, etc. Sterilized by gamma irradiation and ready for use.Nominal Specifications for Model 2006:•Reservoir Capacity:200 µl•Release Rate:0.15 µl/hr•Duration:42 days•Minimum animal size:20 g mouse or ratNote: Actual specifications vary within limits by lot and are provided with the pumps.See other listings for additional pump models including shorter durations.
Instech Two channel mouse tether for continuous infusion on white port, intermittent sampling from red port. Mates with VABM2B series Vascular Access Buttons.
The Instech KVABM2T/25 is a dual-channel tether kit for mouse Vascular Access Buttons™. This 7-inch (18 cm) spring kit enables simultaneous infusion and sampling in unrestrained mice. It features color-coded channels (red for sampling, white for infusion) and includes a 25-gauge swivel with extension lines. This setup provides a secure, tangle-free interface that minimizes animal stress while maintaining a closed, aseptic fluid path for longitudinal studies.
Features
- Channel Count: Dual-channel
- Spring Length: 7 in (18 cm)
- Swivel Type: 25ga (375/25PS)
- Compatibility: 25ga VAB™
- Color Coding: Red/White
- Application: PK/PD studies
Alzet ALZET Osmotic Pumps, Model 2ML2: 2 ml Volume, 5 µl/hr Release Rate, 14 Days Duration - for Orders of 50-90 Pumps
ALZET Osmotic Pumps are small infusion devices for accurate, continuous administration of test agents in unrestrained lab animals. They offer a convenient alternative for long-term dosing compared to stress-inducing methods such as injections and gavage. Pumps are sold empty and easily filled with the test agent via syringe. Their pumping rate is determined at manufacture and is not affected by the molecular weight of the test agent. Pumps are implanted subcutaneously or intraperitoneally for systemic delivery, or can be attached to an ALZET catheter for targeted delivery such as to the brain, vasculature, etc. Sterilized by gamma irradiation and ready for use.Nominal Specifications for Model 2ML2:•Reservoir Capacity:2 ml•Release Rate:5 µl/hr•Duration:14 days•Minimum animal size:150 g ratNote: Actual specifications vary within limits by lot and are provided with the pumps.See other listings for additional pump models including durations up to 6 weeks.
SAI Infusion Technologies 1.3ml K3 EDTA Blood Tubes with Flip Cap
1.3ml K3EDTA Blood Tube with attached flip cap. Ideal for collection of up to 1.3ml of blood for plasma. Slim Tube and Cap profiles ensure a perfect fit in standard racks and centrifuges. 100/pk. Product is for laboratory animal research only.
SAI Infusion Technologies Sterile Press'n Seal - 140 sq feet
Press'n Seal - 140 sq feet ETO Exposed for Sterility. Provides a transparent barrier for patient monitoring in rodent surgeries. Product retains body heat, hair, and allows for easy repositioning during surgery. For use as sterile surgical drape in preclinical studies. 140' roll (70' also available) Product is for laboratory animal research only.
World Precision Instrument Sure-Seal Mouse/Rat Induction Chamber
For use when home cage is unavailable. The EZ-178 Sure-Seal Mouse/Rat Chamber is constructed of heavy-duty, clear acrylic plastic with a non-skid bottom and simple locking, snap latch top.
PATTERSON VETERINARY SUPPLY INC OPTIXCARE EYE LUBE 20GM
This item has a minimum qty of 17 per supplier requirements.
Instech PinPort extension set: PinPort connector, 12in (30cm) PU tubing, 25ga luer stub, sterile
Use a PinPort™ connector to access a PinPort™ at the end of a segment of tubing. Applications include acute experiments where tethering is not necessary, or external tubing connections where the self-sealing septum in the PinPort™ is helpful.
The connectors are 12mm long and feature 22ga or 25ga inputs. The tube that pierces the PinPort™ septum is 25ga. The connectors can be built into extension sets with luers; see below for a standard 30cm set or contact us for custom lengths.
For laboratory animal research use only.
Features
- 22ga or 25ga input
- Low dead volume
- Quick, clean connection
INSOURCE INC MEDI-AIRE ODOR ELIM 1OZ
Manufacturer: Bard Medical Division. Medi-aire Odor Eliminator Ea 1oz Bard Medical Division
Complete tubing set for Instech ABS2, 020 silicone, no low loss. For automated blood sampling from rats.
The Instech ABS2/TS020NL is a complete tubing set designed for the ABS2™ Automated Blood Sampler. Built from 020-size silicone tubing in a no–low-loss configuration, it supports accurate automated blood sampling by maintaining reliable fluid flow and minimizing dead volume. This tubing set is optimized for rat studies and integrates directly with ABS2 peristaltic pump pathways for consistent sampling performance.
Features
- Tubing Type: 020 silicone
- Configuration: No low loss
- Application: Automated blood sampling from rats
- Compatibility: ABS2 Automated Blood Sampler
- Function: Maintains steady fluid flow for sampling and IV fluid return
- Quantity: 1 complete tubing set
Instech Low-flow peristaltic pump, 900:1 motor delivers flow rates from 8-2400l/min.
P720 Peristaltic Pumps
Instech P720 peristaltic pumps deliver the low flow rates of syringe pumps without the limits on delivered volume. They are ideal for tissue perfusion and other low-flow laboratory applications.
The 900:1 motor delivers flow rates from 8-2400l/min depending on tube set size installed. Order tube sets separately. Universal power adapter included.
Features
- Precise. Precision-machined pump heads, Swiss-made motor and gearhead assemblies, linear speed control, and a range of tube sizes deliver flow rates from 0.8 µL/min to 18 ml/min (0.05 to 1100 ml/hour) with an accuracy better than ±5%.
- Small. The pumps fit in the palm of your hand and weigh about one pound.
- Versatile. Pre-assembled tube sets are available with your choice of three tubing materials, nine types of connectors, and one or two channels.
Instech Stainless steel catheter / tubing coupler, 22ga x 15mm. Nonsterile. Package of 100.
The Instech SC22/15 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 22ga and 15mm in length, it provides a secure, low‑dead‑volume junction for reliable fluid transfer in rodent infusion and sampling studies. Its rounded edges help prevent tubing damage, and it is supplied non‑sterile in packs of 100 for laboratory use.
Features
- 22ga stainless steel straight catheter coupler
- 15mm length for secure catheter‑to‑tubing connection
- Rounded edges minimize risk of tubing damage
- Non‑sterile; supplied in packs of 100
- Connects implanted catheters to external infusion lines