Evaporator Accessories
INTACT GENOMICS INC BL21(DE3) Chemically Competent Cells , 96x50µl (12x8-well strip)
These BL21(DE3) Chemically Competent E. coli Cells offer high transformation efficiency and reliable performance for cloning and recombinant protein production. They are optimized for T7-based expression systems and are suitable for transformation and routine protein expression.
- High transformation efficiency
- Excellent performance for protein expression
- Custom formats available: tubes, 96-well plates, and 384-well plates
- Flexible solutions for high-throughput workflows
- Widely used host background
- T7 expression strain
- Deficient in both lon and ompT proteases
- Resistant to phage T1 (fhuA2)
- B strain
V&P Scientific Inc ASPIRATION MANIFOLD, 6 Channel, 24 Well, Standard, 19 Gauge, SS Tubes, 20mm Long, 20mm Spacing, Polycarbonate
ASPIRATION MANIFOLD, 6 Channel, 24 Well, Standard Plate, 19 Gauge, Stainless Steel Tubes, 20mm Long, 20mm Center Spacing, Polycarbonate
Chemglass Life Sciences 0-12mm Chem-Vac, Chem-Cap Valve Replacement Plug and Control Knob, High Vacuum, Perfluoro O-Ring
0-12mm Chem-Vac, Chem-Cap Valve Replacement Plug and Control Knob, High Vacuum, Perfluoro O-Ring. Replacement CHEM-CAP plug and control knob for CHEM-VAC high vacuum valves CG-951 through CG-960. Plug is sold complete with control knob and CHEM-CAP stem.
Chemglass Life Sciences Bump Trap, 100mL, Rotary Evaporator, 29/42 Top Outer, 29/42 Lower Inner
Bump Trap, 100mL, Rotary Evaporator, 29/42 Top Outer, 29/42 Lower Inner, Each
Chemglass Life Sciences Vacuum System, Self-Adjusting, PC3002 Vario Select, Touch Screen Controller, 100-120V
Vacuum System, Self-Adjusting, PC3002 Vario Select, Touch Screen Controller, 100-120V. The PC3002 VARIO select is the best choice vacuum system for bench-top sized rotary evaporators and other evaporative applications. The PC3002 VARIO select controls the vacuum in your rotary evaporator with minimal supervision, continuously optimizing to changing vapor conditions without programming. Just press "start" and the PC3002 VARIO select provides faster evaporation and tighter control, while freeing you up to do more important work. It features a VARIO version of our MD1C vacuum pump, with integrated solvent recovery in a compact, attractive package.Touch Screen Controller:The integrated VACUU-SELECT controller comes with automatic operating modes for most common lab vacuum applications. Drag and drop menus let you set up your own custom operations in minutes.
Chemglass Life Sciences 12-Position Block for 25 x 100mm Round Bottom Tubes, Two Tier Design
12-Position Block for 25 x 100mm Round Bottom Tubes, Two Tier Design. Vial and tube holders for use in centrifugal vacuum evaporators. Blocks are designed to not only maximize evaporation but also to minimize the weight of the block, thereby increasing sample volumes. Constructed of aluminum, each block is black hard coated for resistance to organic solvents and laser etched with the vial/tube size.
Chemglass Life Sciences Condenser, "C" Assembly, Constant Feed, For Rotary Evaporators, Plastic Coated
Condenser, "C" Assembly, Constant Feed, For Rotary Evaporators, Plastic Coated. Two piece cold trap style condenser for use with rotary evaporators. Condenser has an additional 19/38 outer joint sealed onto the condenser to allow continuous feed of volumes exceeding the capacity of the evaporating flask. The 19/38 joint is sealed at an angle. This continuous feed feature eliminates the need for a separate filtration step to remove drying agents or other particulate matter from organic solutions prior to rotary evaporation. The ferrule style connection eliminates o-ring connections, which are prone to degradation with long term exposure to organic solvents. Condenser is supplied complete with all fittings necessary to connect the continuous feed feature, along with our new style PTFE centering ring which makes a vacuum tight seal between the inner cold finger and the plastic coated outer sleeve. Also supplied with a UHMW lid with knob.
Chemglass Life Sciences Bump Trap, 250mL, Rotary Evaporator, Modified, 24/40 Top Outer, 29/42 Lower Inner
Bump Trap, 250mL, Rotary Evaporator, Modified, 24/40 Top Outer, 29/42 Lower Inner. Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Glas Col LLC Evaporator Accessory
Aluminum insert block, 24 position for up to 15/16mm vials, for use with 109A YH-1.
Chemglass Life Sciences Elliptical Bump Trap, Rotary Evaporator, 24/40 Top Outer Jt, 24/40 Lower Inner Jt
Elliptical Bump Trap, Rotary Evaporator, 24/40 Top Outer Jt, 24/40 Lower Inner Jt. Rotary evaporator bump trap is used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of “bumping”. Unique elliptical shape provides large trap volume while decreasing the overall length when compared to standard spherical designs. His allows the use of larger recovery flasks in a rotary evaporator. Traps have a 24/40 top outer joint and the listed size of lower inner joint.
Ace Glass, Inc. Trap, bump, 500mL, 24/40 top, 24/40 bottom
500mL bump trap for use between the rotary evaporators steam tube and evaporator flask, preventing fluid from being drawn into the condenser. Trap has 24/40 top and bottom joints.