Overhead Stirrers
Chemglass Life Sciences Air Motor, 3/8Hp, 50 to 333 RPM Speed Range, 50 in-lbs Constant Torque
Air Motor, 3/8Hp, 50 to 333 RPM Speed Range, 50 in-lbs Constant Torque. Air driven stirrer for use whenever the use of an electrical stirrer might be hazardous or impractical. Ideal for mixing all types of solvents, lacquers and volatile chemicals without the possibility of spark ignition. Motor delivers up to 3/8 Hp, 50 in-lbs of torque, and 333 MAX RPM @ 80 PSI. A needle valve controls the mixing speed. Motor shaft size is 1/2” OD. Supplied complete with 4ft length of air hose with double fittings for connection to air supply.PLEASE NOTE: FOR LONG AND TROUBLE-FREE LIFE OF YOUR AIR POWERED STIRRER, IT IS RECOMMENDED THAT THE AIR SUPPLY BE FILTERED TO REMOVE OIL AND WATER AEROSOLS AS WELL AS FOREIGN PARTICLES LARGER THAN 40 MICRONS. IN ADDITION, AN AUTOMATIC AIR LINE LUBRICATOR MUST BE INSTALLED IN THE AIR LINE JUST AHEAD OF THE MOTOR. FOR THESE ITEMS SEE CG-2025-10.
Chemglass Life Sciences Miniature Over-Head Stirrer with Remote Digital Speed Control, Speed: 10-800 rpm, 91 in-oz Maximum Torque
Miniature Over-Head Stirrer with Remote Digital Speed Control, Speed: 10-800 rpm, 91 in-oz Maximum Torque.More power than stirrers ten times its size!Incredible 91in-oz of power yet fits in the palm of your hand!Safety - Low Voltage - SparklessSealed motor housing isolates motor from organic vaporsLow voltage operation - Sparkless motor runs on 16 voltsConvenience - Weighs less than 1lbCE MarkedThe light weight of J-KEM's stirrers makes it easy to assemble and align the stirrer with the reaction flask. Stirrer coupling fits standard 10mm OD stirring shafts. Side mount clamp on digital speed controller.
Grainger Motor 1 1/2 HP 3 450 rpm 115/208-230V
The Tripp Lite 16U SmartRack Wall Mount Rack Enclosure Cabinet is a 16U wall-mountable rack that provides a sturdy way to mount rack equipment in network closets, back offices and other areas with limited floor space. It is constructed with steel for durability and vented sides for proper airflow. The mounting rails adjust in 1/4" increments to accommodate equipment up to 20.5" deep. The front and rear pairs of vertical rails have square mounting holes that allow easy equipment installation. This 16U wall mount rack has a weight capacity of 200 lbs.
Grainger Motor 2 HP 3 450 rpm 48Y 208-230/460V
The Century Pool and Spa Pump Motor Rigid is a 1.5 HP, 3450 RPM pool pump motor designed for inground pools and spas. It features a 48Y frame, rigid base, and 1.5" diameter shaft. This single-phase motor has a voltage of 115/230 VAC and is totally enclosed and fan cooled. It can replace most major brand pool pump motors like Hayward, Pentair, and Sta-Rite. The motor dimensions are 9" length x 5.6" width x 7.4" height. It comes with a 1 year manufacturer's warranty.
Grainger Motor 5 HP 3 450 rpm 56Y 208-230V
The Century Pool and Spa Pump Motor Rigid is a 1 HP, 115V, single phase pool pump motor with a rigid shaft. It has a rotation speed of 3450 RPM and is thermally protected. The motor is totally enclosed and fan cooled (TEFC) with a 48 frame size. It has a 5/8" diameter shaft and measures 9-1/2" in overall length. The motor is CSA listed and comes with a 1 year limited warranty. It is designed for use with Century pool pumps.
Grainger Motor 2 HP 3 450 rpm 56Y 208-230V
The Century Pool and Spa Pump Motor Face is a replacement motor face for Century pool and spa pumps. It is made of durable thermoplastic and fits various Century pump models including the B284, B232, B284F, and more. This motor face measures 10-1/2 inches by 10-1/2 inches and has a 1/2 inch shaft diameter. It can handle up to 3/4 HP and 3450 RPM. The motor face comes with a thermal protector built in for safety. This is an OEM replacement part made to match the original motor.
Grainger Motor 3 HP 3 450 rpm 56Y 208-230/460V
The Century Pool and Spa Pump Motor Face is a replacement motor face for Century pool and spa pumps. It is made of durable thermoplastic and fits various Century pump models including the B284, B232, N324, N236, and more. This motor face measures 10-1/2 inches by 10-1/2 inches and has a 1/2 inch shaft diameter. It can handle up to 3 horsepower and 3450 RPM. The motor face comes with a one year limited warranty from Century. Overall, this is a quality OEM replacement part for Century pool and spa pumps.
Grainger Motor 2 HP 3 450 rpm 56J 208-230V
The Century Pool and Spa Pump Motor Face is a replacement motor face for Century pool and spa pumps. It is made of durable thermoplastic and fits various Century pump models including the B284, B232, N324, and more. This motor face measures 10-1/2" diameter x 7-3/4" high and has a 1/2 HP, 115/230 volt, 1725 RPM motor. It comes with a rear cover plate and is designed for inground pools and spas. The Century motor face provides a quality replacement part to get your pool or spa pump working again.
Grainger Motor 2 HP 3 450 rpm 56J 115/230V
The Century Pool and Spa Pump Motor Face is a replacement motor face for Century pool and spa pumps. It is made of durable thermoplastic and fits various Century pump models including the B284, B374, B43, B48L, B62, B73, 2HP and 3HP pumps. This motor face measures 7-1/2" diameter and comes with a 1/8 HP 56J frame motor that runs on 115V with 1075 RPM. It has a 1/2" diameter keyed shaft and is CSA approved. The Century motor face can be used for inground and aboveground pools and spas.
Grainger Motor 1 HP 3 450 rpm 56J 115/230V
The Century Pool and Spa Pump Motor Face is a replacement part for Century pool and spa pumps. It is made of thermoplastic and has a 1.5 HP, 3450 RPM motor. The motor face dimensions are 7-3/4" diameter x 5-1/2" long. It has a 1/2" diameter keyed shaft and is designed for 115V applications. The motor face attaches to the wet end housing and works with various Century pump models including the B284, B374, B43, B48L, B62, B73, 2HP and 1HP models. This is an OEM replacement part made to match the original pump manufacturer's specifications.