Overhead Stirrers
Chemglass Life Sciences Digital Motor Controller Only For 1/4HP Explosion Proof Motor, 115V
Digital Motor Controller Only For Explosion Proof Motor, 115V. Explosion proof (XP) motor features a 5:1 right angle gearbox to reduce the overall height above support frame to 10.5¿. Motor is supplied with a 30ft 18/3 SJEOO cord with twist lock connector. XP motor must be used in conjunction with our digital motor controller, and mounts to all our support frames via the supplied mounting bracket. PLEASE NOTE: A LICENSED ELECTRICIAN SHOULD BE CONSULTED FOR ALL FINAL CONNECTIONS. DIGITAL MOTOR CONTROLLER IS NOT EXPLOSION PROOF AND MUST BE MOUNTED OUTSIDE THE HOOD/XP ENVIRONMENT.
Yamato Scientific America, Inc. Yamato Flask Mixer, Max 1000 rpm, Manual type rotation speed, 115V.
Compact design laboratory flask stirrer featuring integrated drive and stirring seal allowing direct installation of flask and stirring in a vacuum and sealed state. Designed with manual type rotation speed. Wide range rotation speed of 50-1000 rpm. Maintenance free and superior DC brushless motor. Belt drive transmission minimizes noise and vibration. Capable of vacuuming up to 399.9Pa without impairing rotation efficiency. Directly attachable to a three-neck flask 24/40, 29/42 optional. Variety of stirring shafts and blades available to handle small to large volume samples. Fluorine rubber seal as standard for shaft seal, superior chemical resistant Teflonrubber seal available as option. At the flask joint, FKM o-ring is used as standard, superior chemical resistant Kalrez o-ring available as option. Equipped with 24/40 rotary joint, 29/42 optional. Operating speed range 50-1000 rpm.
Chemglass Life Sciences 5L ChemRxnHub Process System Complete with Glassware, Stand, and OHS 100 Advance Motor
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Anton Paar Batch cuvette module
Module is separate and removable- Unique technology allows especially fast and stabletemperature control up to 120 °C
Chemglass Life Sciences Air Motor, 3/8Hp, 50 to 333 RPM Speed Range, 50 in-lbs Constant Torque
Air Motor, 3/8Hp, 50 to 333 RPM Speed Range, 50 in-lbs Constant Torque. Air driven stirrer for use whenever the use of an electrical stirrer might be hazardous or impractical. Ideal for mixing all types of solvents, lacquers and volatile chemicals without the possibility of spark ignition. Motor delivers up to 3/8 Hp, 50 in-lbs of torque, and 333 MAX RPM @ 80 PSI. A needle valve controls the mixing speed. Motor shaft size is 1/2” OD. Supplied complete with 4ft length of air hose with double fittings for connection to air supply.PLEASE NOTE: FOR LONG AND TROUBLE-FREE LIFE OF YOUR AIR POWERED STIRRER, IT IS RECOMMENDED THAT THE AIR SUPPLY BE FILTERED TO REMOVE OIL AND WATER AEROSOLS AS WELL AS FOREIGN PARTICLES LARGER THAN 40 MICRONS. IN ADDITION, AN AUTOMATIC AIR LINE LUBRICATOR MUST BE INSTALLED IN THE AIR LINE JUST AHEAD OF THE MOTOR. FOR THESE ITEMS SEE CG-2025-10.
Chemglass Life Sciences Stirrer, Arrow, Medium Duty, 0-2000 MAX RPM, 39 in-oz Constant Torque, 1/15 Hp Motor
Stirrer, Arrow, Medium Duty, 0-2000 MAX RPM, 39 in-oz Constant Torque, 1/15 Hp Motor. Variable speed stirrer is a general purpose stirrer and will handle a wide range of applications. It is specifically designed to handle the more viscous materials. The totally enclosed non-ventilated motor, keeps corrosive fumes and dust out for a long and trouble free service life. The permanent magnet DC motor provides maximum constant torque through entire speed range. The eye level heavy cast aluminum control box is integrated with the motor and has an on/off switch along with a speed control knob. Stirrer is protected from overload with a manually resettable circuit breaker. Electric stirrer is supplied complete with a 9/16" Diameter x 10" long aluminum support rod, 6ft 3-wire grounded plug, and a 3/8” diameter x 12” long stirrer shaft having a 2-1/2" diameter stainless steel propeller..
Sigma Aldrich Fine Chemicals Biosciences EUROSTAR 200 control P4 ov1EA
Extremely powerful laboratory stirrer for highly viscous applications for quantities up to 100 L (H2O). It is designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/4 - 530 rpm (two speed ranges). The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample..nbspMultilingual TFT display .nbspProgrammable functions .nbspIntegrated temperature measurement .nbspInterval operation .nbspTimer function .nbspAdjustable safety circuit .nbspLocked function .nbspInfi
Sigma Aldrich Fine Chemicals Biosciences IKAR EuroStar 60 Digital A1EA
Universal laboratory stirrer designed with a removable wireless controller and a digital TFT display. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. The stirrer comes equipped with a RS 232 and a USB interface to control and document all parameters. An integrated torque trend display is provided for the measurement of viscosity changes. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.Infinitely adjustable speedPush-through agitator shaftsOverload protectionShort-term overload operationSlim casingQuiet operationError code displayAccuracy of temperature measurement/-0.5 tolerance PT1000 (DIN IEC 751 Class A) KProtection class according
Chemglass Life Sciences 10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve.Features:¿ Support Frame with Oversized Rugged Stainless Steel Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Improved Support Clamp Auto-Centers Reactor and Lid¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Stainless Steel Inlet/Outlet Adapters Allow Connection To Cooling/Heating Circulator¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ 5-Neck Lid with Large Powder Addition Funnel¿ Digital Temperature Monitor¿ Electric Motor Has Separate Digital Controller¿ Reactor Jacket Graduated On Both Sides¿ Removable Stainless Steel Pipe Used To Support Side Shelf and Manifold System¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters
Chemglass Life Sciences 10L Process Reactor, Complete, Air Motor, 67.0" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Air Motor, 67.0" OAH with Motor, 15.3" Clearance Below Valve. Features:¿ New & Improved Open Frame Design Provides Excellent Accessibility¿ 6-Neck Lid With Large Powder Addition Port¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Improved Support Clamp Auto-Centers Reactor and Lid Allowing Quick Installation/Removal Of Reactor¿ #304 S.S.Cooling Coil PTFE Coated¿ Lower Support Plate, and PTFE Ring, Have a "V" Shaped Opening Allowing An Unobstructed View Of Bottom Valve¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ Electric Motor Has Separate Digital Controller¿ Digital Temperature Controller¿ Support Frame with Oversized Rugged S.S.Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Removable S.S.Pipe Used To Support Side Shelf and Manifold System¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters
Chemglass Life Sciences 10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve. ¿ New & Improved Open Frame Design Provides Excellent Accessibility¿ 6-Neck Lid With Large Powder Addition Port¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Improved Support Clamp Auto-Centers Reactor and Lid Allowing Quick Installation/Removal Of Reactor¿ #304 S.S. Cooling Coil PTFE Coated¿ Lower Support Plate, and PTFE Ring, Have a "V" Shaped Opening Allowing An Unobstructed View Of Bottom Valve¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ Electric Motor Has Separate Digital Controller¿ Digital Temperature Controller¿ Support Frame with Oversized Rugged S.S.Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Removable S.S. Pipe Used To Support Side Shelf and Manifold System¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters
Chemglass Life Sciences Stirrer, Arrow, Heavy Duty, 0-1000 MAX RPM, 117.6 in-oz Constant Torque, 1/10 Hp Motor
Stirrer, Arrow, Heavy Duty, 0-1000 MAX RPM, 117.6 in-oz Constant Torque, 1/10 Hp Motor. Variable speed stirrer is specifically designed for heavy duty viscous materials. The totally enclosed non-ventilated motor, keeps corrosive fumes and dust out for a long and trouble free service life. The permanent magnet DC motor provides maximum constant torque through entire speed range. The eye level heavy cast aluminum control box is integrated with the motor and has an on/off switch along with a speed control knob. Stirrer is protected from overload with a manually resettable circuit breaker. Electric stirrer is supplied complete with a 9/16" Diameter x 10" long aluminum support rod, 6ft 3-wire grounded plug, and a 3/8” diameter x 12” long stirrer shaft having a 2-1/2" diameter stainless steel propeller.
J Kem Scientific Inc MINIATURE OVER-HEAD STIRRER
OHS-1 Miniature Over-Head Stirrer, <1Lb. Weight, Incredible 91 in-oz of power, Low voltage - Sparkless, Hand-sized. This part contains both part # OHS-1M - MOTOR FOR OHS-1 STIRRER and OHS-DSC - DIGITAL SPEED CONTROLLER for OHS-1 Stirrer.
Cole-Parmer IKA 3725001 T 25 ULTRA-TURRAX High-Speed Homogenizer 115VAC-unit only
Choose from five generators with a sample volume capacity range of 0.3 to 2,000 mL. A digital display shows set speed and can be easily adjusted with its large dial. These systems can be used with tough solids or large volume samples. They are made out of 316 stainless steel.