Overhead Stirrers
Velp Scientifica™ FC S Series Flocculators with Independent Positions
With independent positions that allow standard conditions to be adopted for jar tests, which are the basic requirement for reproducible results. Velp Scientifica™ FC S Series Flocculators with Independent Positions offer precise speed from an electronically controlled DC gear motor.
Alkali Scientific™ IPS2050-40 Overhead Stirrer OS40L, 40L includes stand, and 4 arm propeller, 115V
The Alkali Scientific™ IPS2050-40 Overhead Stirrers OS40L feature high torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples. Speed and run time are accurately set and monitored on the LCD screen. The 40L capacity models are supplied with a 4 arm stainless steel propeller, additional steel and Teflon accessories are available. A feed-through chuck holds accessory shafts firmly in place and is easily tightened and loosened without tools. The overhead stirrers are protected from damage by sensors that shut down operation in the case of high viscosity or obstruction, while a splash cover protects the connection mechanism from potential corrosion. Unlike most mixers, the Alkali Industrial series is also supplied with a support stand and mounting hardware. The stirrer easily and securely attaches to the stand for compatibility with a variety of vessels, up to 24 inches high.
Yamato Scientific America, Inc. Yamato Digital Laboratory Stirrer, Max speed of 1000 rpm. Complete with stand and rod, stirring shaft and 4-blade propeller. 100V-125V
Digital laboratory stirrer with speed range of 100~1000 rpm for medium viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load. Set includes stand, rod, stainless steel shaft and 75mm 4-blade propeller.
Yamato Scientific America, Inc. Yamato Laboratory Stirrer, Max speed of 1200rpm for low to medium viscosity samples. Complete with stand and rod, stirring shaft and 4-blade propeller. 100V-125V
Laboratory stirrer with high speed to support different applications for low to medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 25~1200 rpm.
Chemglass Life Sciences 5L ChemRxnHub Process System Complete with Glassware, Stand, and OHS 100 Advance Motor
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Chemglass Life Sciences 2L ChemRxnHub Process System Complete with Glassware, Stand, OHS 100 Advance Motor and Manifold/Drain System
ChemRxnHub™ process systems are complete with benchtop stand, overhead stirrer and glassware. Available with the optional manifold connection and heat transfer fluid draining system. The unique design of the ChemRxnHub™ support stand and clamping system allows for quick and easy installation/removal of glassware and fits into most benchtop hoods.
Anton Paar Light-scattering instrument for characterizing particlesin liquid dispersions. Measures particle size, zeta potential,electrophoretic mobility, molecular mass and transmittance
Litesizer DLS 301 specificationsMeasurement principle: Dynamic Light Scattering (DLS)Measuring range: 0.3 nm to 15 μm* (particle diameter)Measurement angles: 90°Min. concentration: 1 mg/mL (lysozyme)Max. concentration: 40 % w/v (sample-dependent)Min. sample volume: 1.5 µLAccuracy: Better than +/-2 % on NIST traceable standardsRepeatability: Better than +/-2 % on NIST traceable standardsGeneral specificationsLight source: Semiconductor laser diode / 40 mW, 658 nmLaser warm-up time: 6 minTemperature control range: 0 °C to 120 °CAmbient operating temperature: 10 °C to 35 °CHumidity: Up to 80 % non-condensingDimensions: (W, D, H)450 mm, 505 mm, 135 mmWeight:Approx. 18 kg (40 lb)
Chemglass Life Sciences 1/4 HP DC C1D2 90VDC Permanent Magnet Explosion Proof Motor Only. Complete with 5:1 Gearbox and Stand Mounting Adapter.
Explosion Proof Motor Only. Explosion proof (XP) motor features a 5:1 right angle gearbox to reduce the overall height above support frame to 10.5¿. Motor is supplied with a 30ft 18/3 SJEOO cord with twist lock connector. XP motor must be used in conjunction with our digital motor controller, and mounts to all our support frames via the supplied mounting bracket. PLEASE NOTE: A LICENSED ELECTRICIAN SHOULD BE CONSULTED FOR ALL FINAL CONNECTIONS. DIGITAL MOTOR CONTROLLER IS NOT EXPLOSION PROOF AND MUST BE MOUNTED OUTSIDE THE HOOD/XP ENVIRONMENT.
Chemglass Life Sciences 10L Process Reactor, Complete, Air Motor, 67.0" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Air Motor, 67.0" OAH with Motor, 15.3" Clearance Below Valve. Features:¿ Open Frame Design Provides Excellent Accessibility¿ Support Frame with Oversized Rugged Stainless Steel Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Stainless Steel Inlet/Outlet Adapters Available In M16 x 1 and M30 x 1.5 Allow Connection To Cooling/Heating Circulator¿ Lower Support Plate, and PTFE Ring, Have a "V" Shaped Opening Allowing An Unobstructed View Of Bottom Valve¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ 5-Neck Lid with Large Powder Addition Funnel¿ Digital Temperature Monitor¿ Electric Motor Has Separate Digital Controller¿ Reactor Jacket Graduated On Both Sides¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters
Chemglass Life Sciences 10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve.Features:¿ Support Frame with Oversized Rugged Stainless Steel Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Improved Support Clamp Auto-Centers Reactor and Lid¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Stainless Steel Inlet/Outlet Adapters Allow Connection To Cooling/Heating Circulator¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ 5-Neck Lid with Large Powder Addition Funnel¿ Digital Temperature Monitor¿ Electric Motor Has Separate Digital Controller¿ Reactor Jacket Graduated On Both Sides¿ Removable Stainless Steel Pipe Used To Support Side Shelf and Manifold System¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters
Grainger Motor 2 HP 3 450 rpm 56J 208-230V
The Century Pool and Spa Pump Motor Face is a replacement motor face for Century pool and spa pumps. It is made of durable thermoplastic and fits various Century pump models including the B284, B232, N324, and more. This motor face measures 10-1/2" diameter x 7-3/4" high and has a 1/2 HP, 115/230 volt, 1725 RPM motor. It comes with a rear cover plate and is designed for inground pools and spas. The Century motor face provides a quality replacement part to get your pool or spa pump working again.
Grainger Motor 1 HP 3 450 rpm 56Y 115/230V
The Century Pool and Spa Pump Motor Face is a replacement motor face for Century pool and spa pumps. It is made of durable thermoplastic and fits various Century pump models including the B284, B232, B284F, and more. This motor face measures 10-1/2" diameter x 7-3/4" high and comes with a 1 year limited warranty. It is designed for use in inground pools and spas and features a 56 square flange motor mount and 1/2" keyway shaft. The face includes the impeller, diffuser, seal plate, and hardware for easy installation. This is a high quality OEM replacement part made for Century pumps.
Chemglass Life Sciences 10L Process Reactor, Complete, Air Motor, 67.0" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Air Motor, 67.0" OAH with Motor, 15.3" Clearance Below Valve. Features:¿ New & Improved Open Frame Design Provides Excellent Accessibility¿ 6-Neck Lid With Large Powder Addition Port¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Improved Support Clamp Auto-Centers Reactor and Lid Allowing Quick Installation/Removal Of Reactor¿ #304 S.S.Cooling Coil PTFE Coated¿ Lower Support Plate, and PTFE Ring, Have a "V" Shaped Opening Allowing An Unobstructed View Of Bottom Valve¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ Electric Motor Has Separate Digital Controller¿ Digital Temperature Controller¿ Support Frame with Oversized Rugged S.S.Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Removable S.S.Pipe Used To Support Side Shelf and Manifold System¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters
Chemglass Life Sciences 10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve
10L Process Reactor, Complete, Electric Motor, 70.1" OAH with Motor, 15.3" Clearance Below Valve. ¿ New & Improved Open Frame Design Provides Excellent Accessibility¿ 6-Neck Lid With Large Powder Addition Port¿ Perfluoro O-Rings On 60mm and 200mm Flanges¿ Improved Support Clamp Auto-Centers Reactor and Lid Allowing Quick Installation/Removal Of Reactor¿ #304 S.S. Cooling Coil PTFE Coated¿ Lower Support Plate, and PTFE Ring, Have a "V" Shaped Opening Allowing An Unobstructed View Of Bottom Valve¿ Zero Dead Space Detachable Drain Valve Has Knob with Laser Etched Directional Arrows For Open and Close¿ Electric or Air Motor. Optional XP Motor Available¿ Electric Motor Has Separate Digital Controller¿ Digital Temperature Controller¿ Support Frame with Oversized Rugged S.S.Uprights and Heavy Duty PTFE Coated Aluminum Fittings¿ Removable S.S. Pipe Used To Support Side Shelf and Manifold System¿ Support Bushings For Optional Safety Shield¿ Heavy Duty Lockable Casters