Stirrer Accessories
Bellco Glass, Inc. Stainless Steel Marine Shaft Only, 5L With Clip
Manufactured from 316L stainless steel with electropolish finish. Dimensions: 1/2" od x 7 1/2" long Size: 5l Includes: e-clip for mounting marine prop (1964-73000). MADE IN THE USA
Bellco Glass, Inc. Stainless Steel Shaft Assembly , 1L
Stainless Steel Shaft Assembly The Bellco Stainless Steel Shaft Conversion Kit is designed to convert your standard glass shaft to stainless steel on 1967 and1965 Spinner Flasks. Sizes range from 100 mL to 36 liters for 1965 spinners and 100 to 3000 mL for 1967 spinner flasks. Material: 316L Stainless. MADE IN THE USASteel and polypropylene compression fitting. Size: 1l
Takara Bio Guide-it CRISPR Genome-Wide sgRNA Library NGS Analysis Kit
Guide-it CRISPR Genome-Wide sg
Chemglass Life Sciences Stirring Shaft, 10mm, Polished, Glass Agitator, Three-Blade, 445mm OAL, for 500mL Reactors, 66mm OD Agitator
Stirring Shaft, 10mm, Polished, Glass Agitator, Three-Blade, 445mm OAL, for 500mL Reactors, 66mm OD Agitator. Shaft is precision ground and polished to fit our CG-2076 and CG-2077 10mm PTFE bearings. Designed to be used with cylindrical type reactors. The curved glass blades are spaced 120° apart and angled upward. PLEASE NOTE: STIRRER SHAFTS ARE DESIGNED FOR COUNTER-CLOCKWISE ROTATION.
MSC Chicago Hardware Anchor Shackle, 3/16 in, Drop-Forged Steel, Galvanized
This anchor shackle offers the security of a strong screw pin connection with the ease of a quick release mechanism. Its bow shape handles a wider variety of connections and multi-dimensional pulling, making it suitable for temporary lifting jobs or applications requiring frequent connects and disconnects. It is made from forged galvanized steel for protection from corrosive elements.
- Screw pin for secure connection
- Anchor type shackle for versatile connections
- Constructed from drop-forged steel
- Galvanized finish for corrosion resistance
- Meets or exceeds ASME B30.26 and other federal specifications
- Safe working load of 650 pounds
- Made in USA
Chemglass Life Sciences Replacement Glass Shaft, 100mL and 250mL Internal Spinner Flask
Replacement components for CLS-1414 and CLS-1415 Spinner Flasks.The Complete Impeller Assembly consists of top cap, silicone liner, glass rod, compression fitting magnet holder, paddle and magnetic stir bar.
Bellco Glass, Inc. Glass Impeller Shaft,25-100mL
Description: Glass Impeller Shaft. MADE IN THE USASize: 25-100mLFor Bellco 25-100mL Spinner Flasks & Impeller AssembliesMaterial: Type 1 Class A Borosilicate GlassDimensions: 7mm OD x 120mm Long
Grainger Shaft Grounding Ring For 2 1/8 in Shaft
The AEGIS Shaft Grounding Ring is a one-piece stainless steel ring that provides a path to ground for induced shaft voltages. It has a split-ring design that allows for easy installation without having to remove the coupling. This grounding ring fits shafts from 1-3/4" to 7-15/16" in diameter and has a durable construction that provides long service life. It comes with mounting hardware for attaching a grounding cable. The AEGIS grounding ring is made in the USA and is ideal for grounding motor shaft voltages to prevent electrical damage.
Chemglass Life Sciences 10mm Stirring Shaft, Chem-Stir, Polished, For Use With 300mL-500mL Flasks, 405mm OAL, Complete with PTFE Nut and Bolt
10mm Stirring Shaft, Chem-Stir, Polished, For Use With 300mL-500mL Flasks, 405mm OAL, Complete with PTFE Nut and Bolt. A 10mm OD precision ground and polished stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2077. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2074 ground shaft. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2074.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Chem-Stir, 12 to 20L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Polished, Chem-Stir, 12L-22L Flasks, 730mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground and polished stirrer shaft with our patented Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. For use with PTFE bearings such as the CG-2086. Polished shaft will not cause abrasion to the sealing surfaces of the PTFE bearing, thereby allowing a vacuum tight seal. Uses the same PTFE nut and bolt blade attachment method as the CG-2084 ground shaft.PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2084.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Bellco Glass, Inc. Stainless Steel Marine Shaft Only, 15L With Clip
Material: 316l stainless steel with electropolish finishDimensions: 1/2" x 14 1/2"Size: 15lIncludes: e-clip for mounting marine prop (1964-73000). MADE IN THE USA
Chemglass Life Sciences Stirring Shaft, PTFE Covered SS, 525mm OAL, 66mm OD Retreating Blade, Fits Reactors up to 1000mL
Stirring Shaft, PTFE Covered SS, 525mm OAL, 66mm OD Retreating Blade, Fits Reactors up to 1000mL
Ace Glass, Inc. Stir shaft with PTFE four blade screw propeller, 10mm ODx400mmlength PTFE covered stainless shaft with 50mm exposed for stir motor chuck, 50mm OD propeller with 22mm high blades
Stir shaft with PTFE four blade screw propeller, 10mm ODx400mmlength PTFE covered stainless shaft with 50mm exposed for stir motor chuck, 50mm OD propeller with 22mm high blades