Mills
Grainger Thread Mill Carbide
The Micro 100 16R741 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill. It has a right hand spiral flute design and can cut 60 degree internal threads in steel, stainless steel, cast iron, aluminum, and other materials. The thread mill has AlTiN nano coating for increased tool life and lubricity. It is capable of cutting unified thread sizes from 4-56 to 1/4-20 as well as metric thread sizes from M1x0.25 to M6x1. Recommended speeds are 70 to 120 SFM. Overall, this Micro 100 thread mill provides an efficient method of cutting internal threads in metals.
Grainger Sq. End Mill Single End Carb 3/64
The Grainger 14T279 is a 14-inch diameter, two-blade, aluminum paddle fan with an oil-rubbed bronze finish. It features reversible blades that allow for downdraft and updraft airflow. This fan has an integrated light kit with an opal glass shade and uses an LED bulb. It is damp rated for covered outdoor use. The fan is ENERGY STAR certified for energy efficiency. This 52-inch fan comes with a 4.5 inch downrod, hangs from a standard ceiling mount, and has an integrated pull chain for controlling fan speed and light.
Grainger Thread Mill Carbide
The Micro 100 16R767 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill with a TiAlN coating. It has a right hand spiral flute and can cut 60 degree internal threads in steel, stainless steel, cast iron, aluminum, and other materials. The thread mill has a 1/2" shank and is capable of cutting unified thread sizes from 4-56 to 1/4-20 as well as metric thread sizes from M1.6 to M6. With the proper speeds, feeds, and depths, this durable thread mill provides excellent thread quality and tool life.
World Precision Instrument #6 Carbide Ball Mill
This line-powered micro drill will make easy work of grinding, finishing, cutting and drilling bone, teeth and other material. The high-torque 35,000 rpm (maximum) motor is quiet and has minimal vibration which reduces wear on the motor and provides greater comfort for you. It also features a forward and reverse switch, “E Type” handpiece and handpiece holder. The handpiece has a removable nose cone that can be cleaned and sterilized. It accepts 3/32” and 2.33mm bur shanks. Unlike battery-powered drills, this unit maintains consistent power for the duration of use. The wide range of speeds allows you to control the amount of heat generation.
Cayman Chemical Precellys 7 mL Soil Grinding
Kit includes 50 preps of a mix of ceramic (zirconium oxide) and glass beads in 7 mL standard tubes with O-ring. SK38 7 mL is designed for micro-organism lysing included in samples like soil, sediment, root, feces, animal or plant tissues and more. Sample size range from 200 mg to 2 g tissue or 200 µL to 6 mL culture. [Bertin Catalog P000936-LYSK0-A.0; Previously KT03961-1-303.7]
Thomas Scientific DEMO UNIT - WILEY MINI MILL SINGLE SPEED 115 60HZ
DEMO UNIT - WILEY MINI MILL SINGLE SPEED 115 60HZ
Grainger Sq. End Mill Single End Carb 0.0270
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, 1" overall length, and a 1/2" cutting diameter. The end mill has 4 flutes and a right-hand spiral. It is designed for use on steel, cast iron, aluminum, and other non-ferrous metals at speeds up to 2000 SFM. This end mill is made in the USA by Grainger Approved and is sold individually.
Fritsch Milling And Sizing Inc Sieve Ring P-14 Cl Stainl. Steel 2 mm Trapezoidal Perf.
Sieve ring P-14 cl stainl. steel 2 mm trapezoidal perf.
Sieve rings determine the end fineness of the sample.
Sieve rings with trapezoidal perforation and round perforations are available.
Sieve rings with trapezoidal perforations improve size reduction through extra shearing action.
Sieve rings with round perforations are recommended for grinding brittle and materials of medium fineness with small grain bands.
Also sieve rings with reinforced edges for heavy duty grinding are offered.
Fritsch Milling And Sizing Inc Support Walls P-1 Cl Size 1 Hardmetal Tungsten Carbide
Lateral support walls made of hardmetal tungsten carbide for the FRITSCH Jaw Crusher PULVERISETTE 1 classic line, Size 1.
General material specification:Material: hardmetal tungsten carbide - GC40 - WC
Abrasion resistance: extremely good
Suitable for: hard, abrasive samples
Fritsch Milling And Sizing Inc Collecting Vessel 3 Liters for P-19/P-25
Collecting vessels (stainless steel) for PULVERISETTE 19 and PULVERISETTE 25 are available in a range of sizes.
This collecting vessel has a volume of 3 litres.
For grinding large quantities the 10 Litre volume collecting vessel is recommended.
Grainger Thread Mill 9/16 -18 Carbide
The Scientific Cutting Tools 16R712 thread mill is a solid carbide end mill designed for thread milling applications. It has an overall length of 3.5", a shank diameter of 0.5", and features a TiAlN coating for increased tool life and heat resistance. The thread mill has a 60 degree profile angle and can cut a variety of thread sizes and pitches. It is made from micro-grain carbide for strength and durability. This thread mill is well-suited for difficult to machine materials like stainless steel, titanium, and nickel alloys. It can be run at speeds up to 2000 SFM.
Grainger Thread Mill 3/4 -10 Carbide
The Grainger 16R716 is a Westward 3/8-inch drive impact socket adapter that converts a 3/8-inch drive to a 1/2-inch drive. It is made from chrome vanadium steel for durability and has a black phosphate finish to resist corrosion. This impact socket adapter allows you to use 3/8-inch drive tools with a 1/2-inch drive impact wrench, increasing versatility. It measures 2-1/2 inches long and weighs 0.19 lbs. The 16R716 socket adapter is ideal for automotive repair shops, fleet maintenance, and other heavy duty applications that require frequent socket changes.
Fritsch Milling And Sizing Inc Gassing Lid Cpl. Agate Premium Line 125-420 Ml
Gassing lid cpl. P-5 pl with valves and seal ring made of agate with steel casing
For all grinding bowls premium line 420 ml, 250 ml, 125 ml volume made of agate for PULVERISETTE 5 premium line.
By using this special lid, the grinding bowl can be used for grinding in inert gas and for mechanical alloying - quickly and safely. Gassing lids with Swagelok valves are available on request.