Bioreactor Vessel Hardware
IKA™ Sample Flask Bottle
Sample bottle that can be used to feed various liquids into the Habitat bioreactor (e.g. acid, base, antifoam agents or nutrient solutions).
IKA™ Sample Flask Bottle 1000 mL
This 1000 mL Sample bottle can be used to feed various liquids into the Habitat bioreactor (e.g. acid, base, antifoam agents or nutrient solutions).
IKA™ Sample Flask Holder
Holder for attaching up to four 250 mL sample bottles to the bioreactor vessel, allowing for simultaneous autoclaving.
Bellco Glass, Inc. Motor Drive Stem Assembly , 10L Bioreactor
Motor drive stem assembly for 10 liter bioreactor. 316 l stainless steel Ra 32 finish or better. MADE IN THE USA
Bellco Glass, Inc. Adj.Sample 1/8 Pipe Assembly , 15L Bioreactor
Adjusted Sample 1/8” Pipe Assembly Hi -Torque Over Head Drive Adapter is used in conjunction with the High-Torque OHD Motor to drive the impeller assembly for mixing within a vessel. Used with 100mm cap assembly. --316L SST design with polyester/SST bearing --Includes two (2) 1/4” NPT female plugged ports for optimal fittings --Dimensions 3 3/4” l x 3 3/4” w x t 1/2” tall (including dust shield coupling)--Designed to fit with OHD high torque setups --Adapts all bellco PTFE impeller assemblies or SST impeller assemblies. MADE IN THE USA
Bellco Glass, Inc. Stainless Steel Baffle Assembly , 3L For Bioreactor Systems
Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. MADE IN THE USA. SST Baffle AssemblyFor 3L English HeadplatesSize: 3LMaterial: 316L SST with electropolish finishBaffle Shaft: .250" OD x 6 1/4" long (1/4-28 TPI thread)Baffle Plate: .625" OD x 7" long x .090" thickNoInsertion Length: 9 1/8"Supply with A542-407 - O-ring & 1/4-28 SST Hex Nut
Chemglass Life Sciences 3-Port Thermowell Assembly for 8L VSA Vessels, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Bellco Glass, Inc. Stainless Steel Baffle Assembly , 10L For 10L Bioreactor Systems
Stainless Steel Baffle Assembly , 10L For 10L Bioreactor Systems. Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. MADE IN THE USA.
Chemglass Life Sciences Chemglass Baffle Assembly for 2-3 L Bioreactor (M6 thread)
Chemglass baffle assembly designed to increase mixing efficiency in 2-3 L bioreactors. It mounts near the reactor wall and uses an M6 thread for secure attachment, creating turbulence to improve mixing and mass transfer.
- Increases mixing efficiency inside the bioreactor.
- Mounts near the reactor wall for optimum mixing performance.
- M6 thread for secure attachment to compatible headplates.
- Compatible with 2-3 L bioreactor vessels.
- Constructed from stainless steel; related components are typically 316L with an electropolished 20 Ra finish.
Bellco Glass, Inc. Stainless Steel 2-Port Assembly , 500mL,70mm For Angled Sidearms
All port assemblies are manufactured from 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. 3-port assemblies have siphon, fill tube and vent tubes. All port assemblies include a 45mm blue polypropylene cap and gasket. MADE IN THE USA. For 500mL flasks. Longest tube length 2.5".
Bellco Glass, Inc. 3-Port Harvest Assembly ,36L For Vertical Side Arm Vessels
MADE IN THE USA. Material: 316l SST with electropolish finish, ra 32 or better, inside & outDimensions: harvest tube (3/8" od) - 1" above slug, 17" insertion lengthAddition tube (1/4"od) - 1" above slug, 2 21/64" belowVent tube (1/4" od) - 1" above slug, .975" belowSupply with 45mm PP blue open top screw cap & white silicone gasket