Gas Manifolds

Synthware™ Vacuum and Inert Gas Manifold with Solid Glass Stopcocks

High vacuum hollow glass stopcocks precision ground with corresponding numbers on barrel and plug. Lower vacuum chambers on stopcock are evacuated with a separate hole in the plug in order to hold the plug in the stopcock barrels.

Synthware™ Solvent Transfer Manifold

For purifying and transfering solvents under inert conditions

Synthware™ Vacuum or Inert Gas Manifold with High Pressure Valves

General purpose double bank manifold for use with vacuum and inert gas.

Synthware™ Nitrogen/Argon Manifold with PFTE Stopcocks

Features an outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used.

Synthware™ Double Manifold with Hollow Glass Stopcocks

General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0 to 4 mm high vacuum valves for grease-free operation. Both banks are made from 22 mm medium wall tubing and have all banks open. Ports are spaced 100 mm center to center and have an O.D. of 10 mm.

Synthware™ Vacuum Manifold with PTFE Stopcocks

Main tube is 22 mm O.D. with serrated hose connection (10mm O.D.) and delivery ports have 10 mm serrated hose connections. Distance between stopcocks is 75 mm.

DWK Life Sciences Kimble™ Kontes™ Airless-ware™ Vacuum Flask

Facilitates heating, stirring and solvent stripping without impairing ease of liquid and solid transfer

DWK Life Sciences Kimble™ Kontes™ Vacuum/Gas Double Manifold with Glass Plugs

All-glass manifolds for connecting inert gas and vacuum sources

Synthware™ Inert Gas/Vacuum Double Bank Manifold

General purpose double bank manifold for use with vacuum and inert gas. Supplied with 0 to 4 mm high vacuum valves for grease-free operation. Both banks are made from 22 mm medium wall tubing and have all banks open. Ports are spaced 100 mm center to center and have an O.D. of 10 mm.

Synthware™ Vacuum Manifold with High Vaccum Valves

Features a serrated hose connection (10 mm O.D.). Main tube is 22 mm O.D. and the distance between valves is 100 mm center to center.

Synthware™ Argon/Nitrogen Gas Manifold with PTFE Stopcocks

With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment cutting down on the number used.

Synthware™ Vacuum Manifold, Double Bank

Forward facing high vacuum valves allow easy operation of manifold inside of a fume hood. Main parts are spaced 100 mm center to center. Adapter components or stoppers are available below and have to be ordered separately.

Synthware™ Single Vacuum Manifold with #15 O-Ring

Left and Right Spherical Connection

Synthware™ Manifold with Solid Glass Stopcocks

Features 4 mm double hollow high vacuum stopcocks.

Synthware™ Double Manifold with High Vacuum Valve and Spherical Joint

Designed to incorporate a 0 to 8 mm high vacuum valve as a vacuum shut off. The front tube is for inert gases (17 mm OD), with a 10 mm hose connection. Rear tube is for vacuum (22 mm OD) with two 35/20 socket joints.

GENTEC™ Gentec™ 210 Series Semi-Automatic Switchover Manifolds

Designed for a continuous supply of High Purity gases

  spinner