Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Tygon ACF00028 E-3603 Non-DEHP Nominal Lab Tubing, 3/8"" ID x 9/16"" OD; 50 ft/Pk
Formulation - E3603 Applications:General laboratory use. Characteristics: Long life, won¿t age or oxidize, able to bend to sharp radius curves, and easily works with fittings. Transparent. Temperature range: ¿58 to 165¿F (¿50 to 74¿C)
SCP Science FLARED TUBING,PVC BLACK/BLACK
This item has a minimum qty of 2 per supplier requirements.
Flared Tubing, PVC Black/Black (12)
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S High-Performance Precision Pump Tubing, Tygon Fuel & Lubricant F-4040-A, L/S 24; 50 ft
Applications: Fuels and industrial lubricants¿gasoline, kerosene, heating oils, cutting compounds, and glycol-based coolants Characteristics: Resists most hydrocarbons, embrittlement, and swelling; ozone- and UV-resistant, low extractability, thermoplastic, PVC-based material with plasticizer, firm (stiff) material, translucent yellow
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PVC Reinforced, 3/8"" ID x 9/16"" OD; 100 ft
Applications: High-pressure use, food processing, and beverage handling. Characteristics: Good acid/alkali resistance and aging characteristics. White polyester yarn with orange tracer yarn embedded in a transparent PVC wall. Certification: Resin is FDA-compliant (21 CFR 177.199) and meets USDA requirements. NSF-listed (standard 51) with 3A Sanitary Standards for dairy. Temperature range: -5 to 180¿F (-21 to 82¿C). NSF temperature to 140¿F. Sterilize: Ethylene oxide.
Component Supply Tygon E-3603 Laboratory Tubing, 1/8'' I.D. 3/16'' O.D.
This item has a minimum qty of 5 per supplier requirements.
Tygon E-3603 offers the superior performance traditionally found in Tygon products while addressing the increasing safety concerns regarding phthalates and BPA as well as the increased regulation of products using plasticizers containing DEHP.
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Spooled High-Performance Precision Pump Tubing, Platinum-Cured Silicone, L/S 24; 300 ft
Applications: Pharmaceutical, biotech, peristaltic pumping, and food applications Characteristics: Excellent heat resistance, low compression set, odorless, nontoxic, translucent Spooled pump tubing provides continuous lengths of pump tubing on convenient, manageable spools that are easy to transport and require less storage space than the equivalent amount of individual tubing coils.
Accuflow Systems Saint-Gobain C-Flex Tubing, 3/8 in ID, 5/8 OD, 50 ft
C-Flex 374 thermoplastic elastomer (TPE) tubing, sized 3/8 in ID x 5/8 in OD in a 50 ft coil, is engineered for bioprocess and laboratory fluid transfer. The formulation is pharmaceutical-grade, sealable and weldable pre- or post-sterilization, and compatible with gamma, x-ray, and autoclave sterilization. It remains flexible across a wide temperature range and meets USP Class VI and relevant ISO standards.
- Pharmaceutical-grade thermoplastic elastomer for bioprocess compatibility.
- Sealable and weldable for aseptic welding connections and sealing disconnections.
- Sterilizable by gamma irradiation, x-ray irradiation, and autoclave.
- Flexible from -45°C to 135°C (-50°F to 275°F).
- Meets USP Class VI and relevant ISO standards.
- Available in 50 ft coils for continuous runs and assemblies.
AVANTOR MASTERFLEX (VWR LLC) PTFE-tubing sets, 4mm ID, 6mm OD, set of two.
Masterflex L/S PTFE-Tubing Sets, 4 mm ID, 6 mm OD, Set of Two
AVANTOR MASTERFLEX (VWR LLC) High-Density Polyethylene (HDPE) Tubing, 1/8 x 1/4"", 100 ft/pack
Applications: General-purpose lab and industrial use. Characteristics: Low moisture absorption, good chemical and corrosion-resistance, high tensile strength. Certifications: None. Temperature range: ¿103 to 151¿F (¿75 to 66¿C) Sterilize: Autoclave.
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing with Flared Ends, 3-Stop, PVC, 0.25 mm ID; 12/PK
Three-Stop Flared PVC Color-coded Autoanalysis Tubing for Ismatec Pumps is USP Class VI tubing that is Phthalate-free. It has a long pumping life and exhibits a wide range of acid and chemical resistance, thus making it an ideal choice for Pharmaceutical industries. Plasticizer is very tightly bonded into the material, preventing any leaching of component chemicals into the medium being transported, maintaining its sterility. The tubing is transparent, which allows visual observation of tubing contents. It also offers very low gas permeability and can withstand high pressure contents.
Glass Expansion Peristaltic Pump Tubing, PVC, 2-tag, for large pump white/white, 1.02 mm with flared ends. Inexpensive all-around tubing for general applications. Pack of 6 (1360400227, 842312051521)
Contour Flared End PVC Pump Tube 2tag 1.02mm ID White/White (PKT 6).Tag Colors: White/WhiteID mm: 1.02Wall Thickness mm: 0.86OD mm: 2.74Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Chemglass Life Sciences FEP Tubing; 1/2" OD x 3/8" ID x 20ft Long
FEP Tubing; 1/2" OD x 3/8" ID x 20ft Long. EP heavy wall tubing for use with Chemglass process reactors. Used to connect components having 1/4", 1/2", or 3/4"OD glass connections.