Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PharMed BPT, 1/4"" ID x 3/8"" OD; 25 ft
This tubing is ideal for general laboratory use. They offer long life, won't age or oxidize, fits tightly to glass and metal, bends to small radius curves, are nontoxic. FDA compliant and made according to GMP. Temperature range is -51 to 165¿F (-46 to 73¿C). Can be sterilized with ethylene oxide or autoclave.
Glass Expansion Peristaltic Pump Tubing, PVC, 2-tag, for large pump white/white, 1.02 mm with flared ends. Inexpensive all-around tubing for general applications. Pack of 6 (1360400227, 842312051521)
Contour Flared End PVC Pump Tube 2tag 1.02mm ID White/White (PKT 6).Tag Colors: White/WhiteID mm: 1.02Wall Thickness mm: 0.86OD mm: 2.74Overall Length: 455mm (152mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Platinum-Cured Silicone, 1/32"" ID x 3/32"" OD; 25 ft
Applications: Pharmaceutical, biotechnology, aerospace, food and beverage, and general lab applications. Characteristics: Platinum-cured, excellent heat resistance, low compression set, odorless, nontoxic, translucent. Certification: Elastomer is FDA-compliant (21 CFR 177.2600) and meets USP Class VI; exceeds 3A Sanitary Standards. Tubing is manufactured according to GMP. Temperature range: -58 to 446¿F (-50 to 230¿C) Sterilize: Autoclave or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0120"" ID x 0.0140"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
SCP Science PVC TUBING RED/RED
This item has a minimum qty of 3 per supplier requirements.
Tubing, PVC Red/Red 3cl (12)
AVANTOR MASTERFLEX (VWR LLC) Ismatec Microbore 2-Stop Tube Sets, Platinum-Cured Silicone, 0.89 mm ID; Pack of 6
Compatible with Masterflex L/S Multichannel pump head, small cartridges
AVANTOR MASTERFLEX (VWR LLC) SILICONE TUBING 0.89MM ID 50FT
NC3363804 SILICONE TUBING 0.89MM ID 50FT
AVANTOR MASTERFLEX (VWR LLC) Lab Tubing, Non-DEHP, 1/16""ID X 1/8""OD, 50 FT/Pk
E-3603 Non-DEHP Lab Tubing, 1/16" ID x 1/8" OD; 50 ft/Pk. Formulation: Tygon E-3603Applications: General laboratory, food and beverage, biopharmaceutical, analytical instruments.Characteristics: Non-DEHP, phthalate free. Long life, chemical resistant, nonoxidizing; able to bend to sharp radius curves and easily works with fittings. Transparent.Certifications: FDA compliant; meets USP Class VI and NSF 51 requirements.Temperature range: ¿51 to 165¿F (¿46 to 74¿C
AVANTOR MASTERFLEX (VWR LLC) C-Flex Tubing Braided; 1/2""id, 3/4""OD, 1/8"" Wall, 15'
Applications: For use with cell cultures, vessel and tank transfer, pump applications and cold storage. Characteristics: C-Flex formula 082, clear, animal derived component free (ADCF) resin and reinforced with polyester braid. Certifications: Complies with USP Class VI standards. Temperature range: -50 to 275¿F (-45 to 135¿C) Sterilize: Autoclavable and gamma sterilizable.