Tubing Connectors and Fittings
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, Nylon, Y-Connector, Hose Barb Union, 1/16"" ID; 100/PK
Combine these simple, economical fittings with flexible tubing for use in your low pressure applications. Ideal for applications such as pharmaceuticals, laboratory, industrial/manufacturing, water sampling, food processing. These nylon fittings offer good chemical resistance. Temp range: -50 to 250¿F (-46 to 121¿C). Sterilize by ethylene oxide only.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Fitting, HDPE, Y-Connector, Hose Barb Union, 3/32"" ID; 100/PK
Combine these simple, economical fittings with flexible tubing for use in your low pressure applications. Ideal for applications such as pharmaceuticals, laboratory, industrial/manufacturing, water sampling, food processing. These High-Density Polyethylene (HDPE) fittings offer very good chemical resistance. Temp range: -65 to 150¿F (-53 to 65¿C). Sterilize by ethylene oxide only.
Water Saver Faucet Company 3/8" NPT FEMALE INLET, PINK
Keyed Quick Connect, push button plug, brass, 3/8" NPT female outlet, locking
Foxx Life Sciences EZBio Ultra Minipure Sterilizing Grade Capsule Filter, 0.2µm Pore Size, Double-Layer PTFE, 1.27 ft² EFA, 0.75" Sanitary Inlet/Outlet, 2" Height, Silicone O Ring, Autoclavable, Non Sterile, 4/CS
EZBio Ultra Capsule filters provide superior sterile air and vent gas applications. Featuring a double-layer hydrophobic PTFE membrane and advanced pleat construction, they ensure high gas throughput and microbial retention in demanding environments. Available from 2” to 40” with hose barb, female NPT, or sanitary connections, they integrate seamlessly into biopharma, food & beverage, and high-purity air applications
Features
100% retention of B. diminuta 10^7 CFU/cm² per ASTM F838
Complies with USP Class VI (121°C) and 21 CFR Part 177
Optimized pleat geometry and open-area support layers provide outstanding airflow at minimal differential pressure
Autoclavable 20 times for 60 minutes at 257°F, 53 psi
Maximum Pressure
Forward
75 psid (5.1 bar) @ 75°F; 40 psid (2.8 bar) @ 180°F
Reverse
50 psid (3.4 bar) @ 75°F
Applications
Air & Gas Filtration
Sterile Venting
Bioreactor Vent Filters
Off-gas filtration
Chemglass Life Sciences Lower Joint Adapter - 45/50 Lower Joint Adapter fits 31mm Stir Shafts, 2-3/8in
Lower Joint Adapter - 45/50 Lower Joint Adapter fits 31mm Stir Shafts, 2-3/8in. Our NEW mechanical seal bearing is the only design on the market that will permit you to use your current glass, metal or PTFE covered stir shaft. The design allows you to have the flexibility of vertical adjustment and still choose your agitator diameter and style. Bearing has a ferrule and locking nut to ensure that the seal rotates properly, and is supplied complete with a gold plated wrench. Lower joint adapters are supplied complete with perfluorinated o-rings and a loosening nut. PLEASE NOTE: BEARING BODY AND LOWER JOINT ADAPTER MUST BE ORDERED SEPARATELY.**MAX RPM WILL DEPEND ON SHAFT AND/OR AGITATOR TYPE, ALONG WITH ALIGNMENT OF MOTOR AND COUPLING. CHEMGLASS RECOMMENDS A MAX OF 500 RPM WHEN USED WITH ANY GLASS VESSEL, LID OR SHAFT. LONGER LENGTH STIRRER SHAFTS ARE REQUIRED FOR USE WITH CG-2077-M MECHANICAL SEAL STIR BEARINGS.
BOSTON FLUID SYSTEMS INC Stainless Steel Swagelok Tube Fitting, Bulkhead Union, 1/8 in. Tube OD
Stainless Steel Swagelok Tube Fitting, Bulkhead Union, 1/8 in. Tube OD mad e of 316 stainless steel.