Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Flow Control, Chromatography, 75/50 Ball Joint
Adapter, Flow Control, Chromatography, 75/50 Ball Joint. Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap metering plug.
Chemglass Life Sciences Adapter, Vacuum Filtration, 14/20, #2 Pluro Stopper, PTFE Stopcock, Accepts Buchner Funnel up to 30mL
Adapter, Vacuum Filtration, 14/20, #2 Pluro Stopper, PTFE Stopcock, Accepts Buchner Funnel up to 30mL. Adapter used for reduced pressure filtrations using plain stem Buchner funnels. Stopcock permits control of vacuum source. Top of adapter is tooled to accept the listed size of pluro-stopper.NOTE: ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO-STOPPER, SEE CG-1401
Chemglass Life Sciences Adapter, Distilling, 24/40 - 10/30, 75mm Immersion, 75°
Adapter, Distilling, 24/40 - 10/30, 75mm Immersion, 75¿. Adapter is used to connect distilling column with vertical condensers. With standard taper outer joint at the top for use with 10/18 or 10/30 jointed thermometers. Both lower inner joints are the same size. Side arm is at a 75¿ angle to the vertical tube. For thermometers see CG-3506-N.
Chemglass Life Sciences Adapter, Distillation, 105°, 29/42 Joint Size
Adapter, Distillation, 105¿, 29/42 Joint Size. Distillation adapter with top outer and lower inner joints both being the same size.
Chemglass Life Sciences 24/40 Outer Joint, 16in OAL, on 25mm OD x 1.5mm W tubing
24/40 Outer Joint, 16in OAL, on 25mm OD x 1.5mm W tubing. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105. These joints offer the glassblower the opportunity to construct apparatus made of heavier tubing or without unnecessary seals.
Chemglass Life Sciences Adapter, Vacuum Filtration, 31mm ID Flange, #3 Pluro Stopper, 24/40 Lower Vacuum Assembly, Overall Height 220mm
Adapter, Vacuum Filtration, 31mm ID Flange, #3 Pluro Stopper, 24/40 Lower Vacuum Assembly, Overall Height 220mm. Adapter used for reduced pressure filtration with plain stem Buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D. of 10mm at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER, See CG-1401.
Chemglass Life Sciences Adapter, Distillation, 14/20 Joint, 100mm Center to Center
Adapter, Distillation, 14/20 Joint, 100mm Center to Center. With two standard taper inner joints, parallel, and at a 75º angle to the connecting tube. Adapter has a sealed in drip tip and serrated hose connection for vacuum source.
Chemglass Life Sciences Adapter, Flow Control, Chromatography, 35/20 Ball Joint
Adapter, Flow Control, Chromatography, 35/20 Ball Joint. Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap metering plug.
Chemglass Life Sciences 19/22 Outer Joint, Medium Length, on 22mm OD x 1.8mm W tubing
Ground Joint, Outer, Medium Length. 19/22 Outer Joint, Medium Length, on 22mm OD x 1.8mm W tubing.
Chemglass Life Sciences 103/60 Outer Joint, Full Length, on 110mm OD x 3mm W tubing
Standard taper outer joint tooled on tubing approximately the same diameter as the top reinforcing ring, affording no hold-up below joint. 103/60 Outer Joint, Full Length, on 110mm OD x 3mm W tubing.
Chemglass Life Sciences Adapter, TFE Compression, 1/4" OD to 1/4" NPT Male
Adapter, TFE Compression, 1/4" OD to 1/4" NPT Male. Replacement part for CG197181.
Chemglass Life Sciences Complete Baffles for use in 10L-20L Reactors: Overall Baffle Length: 32", Effective Baffle Length: 13.5", Baffle Width x Depth (mm): 18 x 18, Closed Bottom, Adapter Joint Size: 45/50
Complete Baffles for use in 10L-20L Reactors: Overall Baffle Length: 32", Effective Baffle Length: 13.5", Baffle Width x Depth (mm): 18 x 18, Lower PTFE Compression Fitting: Closed Bottom, Adapter Joint Size: 45/50. Unique glass baffle system for process reactors from 2L to 50L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. All baffles have 3/4" precision ground top and lower tubing for use with compression fittings and top jointed adapter. PLEASE NOTE: SEE CG-1872-B FOR pH ELECTRODE BAFFLES.Features:¿Available In Square Or Rectangular Shapes, Open Or Closed Bottom¿Baffle Can Be Vertically Adjusted Inside Reactor¿Hollow Baffles Allow Thermocouples From 1/8" to 1/4" In Diameter To Be Inserted Into The ReactionComplete Baffles Consist Of: Glass Baffle, Glass Fitted PTFE Adapter, And Lower PTFE Compression Fitting.¿Designed and developed by John Korzun, Bristol Myers Squibb, New Brunswick, NJ
Chemglass Life Sciences Complete Baffle System: Overall Baffle Length: 515mm, Effective Baffle Length: 315mm, Baffle Width x Depth (mm): 7 x 10, PTFE Compression Fitting: 1/4", Adapter Joint Size: 24/40
Complete Baffle System: Overall Baffle Length: 515mm, Effective Baffle Length: 315mm, Baffle Width x Depth (mm): 7 x 10, PTFE Compression Fitting: 1/4", Adapter Joint Size: 24/40. Unique baffle system for benchtop process reactors from 300mL to 5L. Designed to increase agitation in the reactor and mimic baffles found in larger glass lined reactors. PTFE jacketed stainless steel provides excellent strength and chemical durability.Features:¿ Adjustable Rectangular Baffle¿ PTFE Standard Taper Adapter Is Offset Permitting Baffle To Be Adjusted Up To 1/4" Towards The Center Of The Reactor.¿ Baffle Can Be Vertically Adjusted Inside Reactor.Complete Baffles Consist of: PTFE Jacketed S.S. Baffle, PTFE Standard Taper Adapter, And A 1/4" PTFE Compression Fitting.The 360mm Overall Baffle Length Is For 300mL-500mL Reactors.The 410mm Overall Baffle Length Is For 1L, 2L, & 4L Reactors.The 515mm Overall Baffle Length Is For 3L & 5L Reactors.
Chemglass Life Sciences 3/4" Lower PTFE Compression Fitting for use in 10L-50L: Fits Thermocouple: 1/4"
3/4" Lower PTFE Compression Fitting for use in 10L-50L: Fits Thermocouple: 1/4".
Chemglass Life Sciences Adapter 3/4" beaded pipe to M16 x 1 Male
Adapter 3/4" beaded pipe to M16 x 1 Male. Stainless steel transition adapter from beaded pipe on the inlet/outlet of the reactor to M16 x 1 or M30 x 1.5 male. Used to connect fluid transfer hose to the vessel. Adapters require the beaded pipe couplings for connection to the vessel. Two are required per reactor.