Chromatography Column Tools
Waters Corp Waters Flow Splitter, 8.0–30 mL/min, 5000:1, 19 mm Column ID
This flow splitter collects fractions in AutoPurification systems with destructive detectors. It optimizes detector efficiency by diverting eluent to the detector, with the remainder passing through a delay coil to enable peak collection. Suitable for systems with fixed column sizes and flow rates.
- Flow rate range: 8–30 mL/min
- Split ratio: 5000:1
- Nominal flow rate: 20.00 mL/min
- Target column ID: 19 mm
- Split ratio accuracy: ±30% to –20% at nominal rates (with no outlet connections)
- Peak dispersion: Less than 20% on peak area at nominal flow rates
- Minimum delay time: 5 sec. at max flow rates
- Maximum backpressure: 5171 kPa (52 bar, 750 psi) at max flow rates, 25°C
- Maximum downstream pressure (Prep outlet): 1724 kPa (17 bar, 250 psi)
- Operating temperature: 4°C to 40°C
- Operating humidity: 20–80% noncondensing
Grainger Threading Tool 3/16 Carbide
The Grainger 16T162 is a 1/4 HP, 115V, 1725 RPM, 56C frame, open drip proof, single phase, sleeve bearing electric motor. It has a 1/2" diameter shaft and measures 4-1/2" in diameter and 5-3/4" in length. This motor can be used for general purpose applications and features thermal overload protection. The enclosure helps protect against dirt and debris.
Grainger Threading Tool 3/8 Carbide
The Micro 100 Threading Tool is a high speed steel threading tool with a 3/8" shank diameter and 1/2" maximum depth of thread. It has a 60 degree threading point angle and can cut unified coarse, unified fine, and 8 pitch threads. The overall tool length is 3-1/2". This single point threading tool allows quick threading starts and smooth thread finishes in most materials. It is made in the USA.
Grainger Threading Tool 1/4 Carbide
The Grainger 16T168 is a 16 ton hydraulic bottle jack made by Hein-Werner. It has a minimum height of 10-3/4 inches and a maximum height of 16-1/4 inches. The jack has a welded base for stability with rubber pads to prevent slipping. It has a two piece handle for easy pumping and controlled lifting. The hydraulic system is sealed and protected from dirt and moisture. This high quality bottle jack is designed for shop use and medium duty lifting applications.
Grainger Threading Tool 3/8 Carbide
The Micro 100 3/8" shank threading tool is a high speed steel insert style threading tool with a TiN coating for wear resistance. It has a 3/8" shank diameter and can cut unified thread sizes from 4-56 to 1"-8. The inserts are replaceable carbide inserts with a TiAlN coating for heat and wear resistance. The tool comes with one DCG432 insert installed and includes one additional insert. It can be used for both right and left hand internal and external threading operations. The tool body is made from M2 high speed steel and has an overall length of 4".
Grainger Threading Tool 1/2 Carbide
The Micro 100 1/2" Shank Threading Tool is a high speed steel threading tool with a 1/2" shank diameter and an overall length of 5". It has a 60 degree threading point and can cut unified coarse, unified fine, and metric threads. The tool has an AlTiN coating for increased tool life and lubricity. It is made in the USA by Micro 100 and is well-suited for production threading applications on lathes, screw machines, and CNC lathes. The tool provides accurate threading with optimized chip flow and evacuation.
Grainger Threading Tool 1/2 Carbide
The Micro 100 1/2" Shank Threading Tool is a high-speed steel threading tool with a 1/2" shank diameter. It has a 60 degree threading point and can cut unified coarse, unified fine, and 8 pitch threads. The overall length is 5" and it has a 3/8" minor diameter. This threading tool is made in the USA out of C2 grade high-speed steel for good wear resistance. It can machine a variety of materials including steel, stainless steel, cast iron, aluminum, plastics, and more. The Micro 100 threading tool offers accurate single point threading in a durable tool.
Grainger Threading Tool 3/16 Carbide
The Grainger 16T275 is a 16-ton hydraulic bottle jack made by Hein-Werner. It has a lifting range of 10-15 inches and a lowered height of 9.5 inches. The jack has a welded base for stability with rubber pads to prevent slipping. It has a two-piece handle for easy pumping and controlled lifting. The hydraulic system is sealed and has an overload valve to prevent over-extending. This heavy duty jack is designed for shop use and farm equipment lifting. With proper care it will provide reliable service.
Perkin Elmer US LLC Seal Removal Tool
Calion standards are premixed and adsorbed into a solid phase. These standards are ideal for in field use because they contain no liquids. Calion PV Mixes are used for Torion T-9 calibration, including both mass and GC retention time calibrations. The combination of Custodion SPME sampling with Calion standards provides robust and rapid capability for in-field calibration because they contain no liquids. Calion PV Mixes are used for Torion T-9 calibration, including both mass and GC retention time calibrations. The combination of Custodion SPME sampling with Calion standards provides robust and rapid capability for in-field calibration.
Analytical Sales & Services Nut Extender Tool Micro
This item has a minimum order quantity of 3 per supplier requirements. NUT EXTENDER TOOL MICRO
