Maintenance Lubricants and Penetrating Fluids
Specialty Fluids Co FOMBLIN 25/6 1KG
This item has a minimum qty of 3 per supplier requirements.
FOMBLIN 25/6 1KG.
Pipette Supplies, Inc. Reference/Research Silicone Grease 45 grams
Reference/Research Silicone Grease 45 grams
Sigma Aldrich Fine Chemicals Biosciences Silicone Rotational Viscos
This product is a certified reference material (CRM) certified to International Standards BS EN ISO / IEC 17025 and ISO 17034 under UKAS accreditation.
Hach Company Stopcock Grease, 150 gram Tube
For lubricating ground glass joints, glass stopcocks and valves, Tensette Pipets, and for sealing desiccators. Lubricant has low vapor pressure and resists attack by acidic and alkaline solutions.
Electron Microscopy Sciences Apiezon High Vacuum Grease Type M 100 GR
Similar to grease type L, but it contains more wax. Grease M has an estimated vapor pressure @ 20 degree C of 2x10-9 torr, higher than Type L. Type M is recommended for applications where a grease of moderately low vapor pressure is required; such as for sealing ground joints on the backing side of oil diffusion pumps.
Sigma Aldrich Fine Chemicals Biosciences Vacuubrand Chemistry vacuu1EA
Three-stage chemistry-design diaphragm pumps are an excellent solution for continuous oil-free pumping of corrosive gases and vapors and meet many difficult requirements. The three-stage construction provides the advantageous combination of high pumping speed and very low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics.Well-proven PTFE sandwich diaphragms provide increased reliability and extended operating life. The MD 4C NT with gas ballast valve is optimally prepared for pumping condensable vapors due to the very good ultimate vacuum (even with gas ballast) as well as for high boiling solvents. The new NT-series features further improve performance data and superior vapor tolerance..nbspPump supplied completely mounted ready for use with manual.nbspOutstanding chemical resistance and superior vapor tolerance.nbspExceptionally high performance even at low vacuum.nbspExcellent ultimate vacuum even with gas ballast.nbspMa
Ted Pella Inc PELCO Pro C1000 Cyanoacrylate Glue, 20ml
PELCO Pro C1000 CA glue has a high viscosity and a longer curing time. Ideally suited when more careful positioning is needed, surfaces are not smooth or for gaps up to 0.008” (200µm). Curing time 10-15 seconds.
Ace Glass, Inc. Dow Corning, High vacuum grease, tube, 5.3 oz. (150g)
Dow Corning High Vacuum Grease. A silicone lubricant that effectively seals and lubricates glass stopcocks, joints and glass-rubber connections. Resistant to most chemicals, heat stable and inert. Supplied in tube, 5.3 oz. (150g).
Electron Microscopy Sciences EMS Gold Epoxy Paste 2 GR
This EMS one part Epoxy Gold Paste is a gold-filled conductive bonding, exhibiting high electrical conductivity and bond strength. It is used in preference to silver-epoxy or other silver preparations to avoid silver migration problems, or when a higher signal is required.
The Gold Paste is well suited to all SEM work, and it bonds well to alumina ceramic substrate, phenolic circuit boards, and transistor headers. It is also useful in a variety of applications in solid state and hybrid circuits including attachment, bonding semiconductor devices, heat sinks, capacitor chips.
GRACOROBERTS EPON Resin 828 Liquid Epoxy Resin, 1 GAL
EPON Resin 828 is an undiluted clear difunctional bisphenol A/epichlorohydrin derived liquid epoxy resin. When cross-linked or hardened with appropriate curing agents, very good mechanical, adhesive, dielectric and chemical resistance properties are obtained. Because of this versatility, EPON Resin 828 has become a standard epoxy resin used in formulation, fabrication and fusion technology.