Maintenance Lubricants and Penetrating Fluids
Cotronics Corp Resbond™ 907GF Adhesive & Sealant, 1 lb. Container (1/2 pint)
This item has a minimum order quantity of 3 per supplier requirements.
This moist, creamy putty is easily applied from standard caulking cartridges for use from -300F to 2300F. Just apply to steel, stainless, iron, most metals, ceramics, ceramic cloth, tapes, gaskets, tadpole gaskets, etc. Air dries in 4-12 hours at room temp. (curing may be accelerated with mild heat) and is resistant to most chemicals, solvents, oxidizing and reducing atmospheres, aging, thermal cycling and electricity. Use for bonding, sealing and repairing exhaust systems, fire brick, gas turbines, brazing fixtures, equipment, stacks, etc. Ideal for use in any high temperature Assembly, Production, Repair or Maintenance Application.
Grainger SQZBTL LUBE W/ TFE 2OZ TRI-FLO
Tri-Flow Lubricants, with PTFE Lube,2OZ, Unique coating action fills in surface irregularities with premium petroleum oils,extreme pressure additives, Low viscosity, Protects against moisture, corrosion damage, stops icing, rust formation
Ted Pella Inc PELCO Colloidal Silver Paste, 25g
Ideal where a nonflowing paste is needed for special applications. Particle size: 0.4-1.0µm, 80% are below 1.0µm. Cures in 16-20 hours, or 30 minutes @125-150°C. Clear lacquer base. Approximate Specific Gravity 2.25g/cc3. Service temperature = 200°C. Use #16021 gold/silver thinner/extender to dilute if needed.
MILLER STEPHENSON CHEMICAL COMPANY INC PTFE Dry-Film Lubricant, Min of 4
MS-122XD was designed as an efficient, durable, and universal dry film lubricant with superior release and non-stick characteristics. Has the fastest dry time of all the products in the 122 series with the most refined final ultra-thin film properties.
Sanford Distributing Co High Peel Strength Urethane D-50, 100/carton
Double Bubble High Peel Strength Green & Beige Package has a Shore Hardness D-50 and is a good combination of high peel and lap shear strengths. It is semi-flexible, will bond to rubber, leather, china & many plastics. For automotive repairs, bonding aftermarket replacement mirrors, etc., repair of shoes, ski boots, and other sports equipment, repair of conveyor belts.
PFEIFFER VACUUM INC ALCATEL 120 VACUUM PUMP OIL 2L
This item has a minimum order quantity of 3 per supplier requirements. ALCATEL 120 VACUUM PUMP OIL 2L
Netmercury GREASE KRYTOX GPL205 2OZ
GREASE KRYTOX GPL205 2OZ - Krytox GPL 200-207 greases are white buttery greases with all of the same properties as the Krytox GPL 100-107 oils that are made from, but they are in grease form
RS Hughes Inc DEVCON 5 MIN EPOXY 25ML
Devcon 5 Minute Amber Two-Part Epoxy Adhesive - Amber, Base & Accelerator (B/A) - 25 ml Tube - Shore Hardness 85 Shore D, Shear Strength 1900 psi
Ace Glass, Inc. 4oz Stir-Lube stirrer lubrication
4oz Stir-Lube stirrer lubricant is a superior, low melting, silicone based lubricant which liquefies at body temperature. Its composition allows for application of a very thin layer to a stirring shaft to increase bearing and shaft life at least three times over that of a bearing lubricated with glycerine.
Ace Glass, Inc. 30mL Hi-Lube heavy duty stirrer lubrication.
30mL container of Hi-Lube heavy duty stirrer lubricant. Lubricant is chlorofluorocarbon grease for use at speeds up to 6000 rpm with ACE standard glass assemblies. High chemical inertness is unaffected by strong acids and alkalis. Soluble in most organic solvents. Suitable for use with oxidizing gases. Has high heat resistance and is thermally stable up to 260 degrees C (500 degrees F). Non-flammable; does not carbonize on decomposition.
Electron Microscopy Sciences Crystalbond™ 555 Adhesive Stick, White 90 GR
A temporary adhesive. These wash away adhesives are used as a temporary bond for holding delicate crystals, metallurgical specimens, glass components, and ceramic substrates for dicing, slicing, drilling and polishing. These materials adhere readily to metals, glass, ceramic and then can be washed after machining away using various solvents. Use as a water soluble temporary bond, for precise high purity work.
Color: White
Softening: 125°F (52°C)
Flow point: 130°F(54°C)
Viscosity: 500 cps