Color Comparison Tubes
DWK Life Sciences Kimble™ Exax Brand Nessler Tall-Form Color Comparison Tubes with standard taper Cap Stoppers
With standard taper Cap Stoppers
DWK Life Sciences Kimble™ Low Form Nessler Color Comparison Tubes
Fill Kimble™ Low Form Nessler Color Comparison Tubes and let their shadowless bottom transmit undistorted light. No dark spots form when the tubes are filled with liquid and viewed from the top.
DWK Life Sciences Kimble™ Exax Brand Nessler Tall-Form Color Comparison Tubes
Shadowless bottoms transmit undistorted light
DWK Life Sciences Kimble™ AOCS Color-Comparison Tubes
Shadowless bottom and sturdy construction make these tubes ideal for AOCS-specific testing
DWK Life Sciences Kimble™ Color Comparison APHA Standard Tubes
High-quality glass test tubes that meet Federal and American Public Health Association (APHA) standards
DWK Life Sciences Kimble™ Low-Form Color-Comparison Tubes
Shadowless bottom construction allows for viewing with undistorted light
Lovibond™ Model 711-A Nesslerizer System Nessler Tubes
Set of two clear glass Nessler tubes
Wilmad Labglass TUBE CLR CMPR LOW 50ML
Tube, Color Comparison, Low Form, Unmatched. Graduated at: 50mL; Approximate O.D.: 25mm; Approximate Height: 175mm; Graduated Length: 126-136mm. Tube is graduated at specific points listed.
Wilmad Labglass TUBE CLR CMPR LOW 100ML
Tube, Color Comparison, Low Form, Unmatched. Graduated at: 100mL; Approximate O.D.: 32mm; Approximate Height: 200mm; Graduated Length: 145-163mm. Tube is graduated at specific points listed.
VWR INTERNATIONAL LLC NESSLER COLOR COMPARISON TUBES
KIMAX® Nessler Color Comparison Tubes, Tall Form, APHA Standard, Kimble Chase. Matched Set. Scale length: 200-220mm. Tube dimensions: 20 x 300mm. Graduation increments: 50 mL
DC Scientific Glass Inc NESSLER 50ML TUBE PAIR
This item has a minimum qty of 2 per supplier requirements.
AF306 NESSLER CYLINDERS, 50ML SET OF 2 (2012)
Med Vet International 104mm Compression Plate, 14-Hole -- 2.4 Diamter, J1074J
Many fractures in feline and small canine patients are too small for the 2.0mm DCP and the 2.7mm CDP is too large.The difference between these plates is enormous compared to the difference between 2.7 and 3.5 CDPs. The AMI (resistance to bending) of the 2.7 CDP is 20 times stiffer than the 2.0 DCP. The AMI of the 2.4 DCP is 10 times that of the 2.0 DCP.The solution is a 2.4 series of plates and screws. The plates in both size and strength are midway between 2.0 and 2.7 DCPs. The range and specifications are shown below. The standard 1.5mm hex screwdriver (used for 1.5 and 2.0 screws) is required. The pilot drill is 1.8mm and dedicated instrumentation such as load/neutral guides are also available.