Stirrer Accessories
Ace Glass, Inc. PTFE agitator, (4) 140mm anchor style blades, fits 28mmdrilled shafts. Replacement nut & bolt: 8091-134
AGITATOR PTFE 28MM 140MM BLADE
Ace Glass, Inc. 19mm 28" hollow glass stir shaft, precision ground, button type
19MM 28 HLW STIR SHAFT
Glas Col LLC Homogenizer
Stirrer motor homogenizer and speed controller for gentle dispersion of tissue and cellsAnalog unit with a variable speed of 333 to 4,000rpm 120V and an electronic motor controller that maintains speed regardless of changes in viscosity1/4hp motor drive unit has a geared output shaft for higher torque applications and lower speeds, and a direct-drive output shaft for lower torque applications and higher speedsElectronic motor controller provides smooth rotation and repeatability while reducing motor temperature and noiseReversing switch on controller allows motor shaft to rotate the pestle clockwise or counterclockwise during homogenization
Chemglass Life Sciences Stirring Shaft, 10mm, Chem-Stir, 100mL-5L Flasks, 468mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 10mm, Chem-Stir, 100mL-5L Flasks, 468mm OAL, Complete with PTFE Nut and Bolt.¿ PTFE is the only contact in the lower radius of the flask, therefore breakage due to dropping the stirrer shaft has been eliminated.¿ Design permits the proper amount of tension to be applied to the blade, thereby preventing the blade from flipping over to the incorrect side during flask insertion.¿ Design permits use with any PTFE stirrer blade with the keyhole shaped cutout for 10mm or 19mm shafts.A 10mm OD stirrer shaft with our patented* Chem-Stir blade attachment system. Shaft has been manufactured w/ ring at the lower end to permit attachment of the blade with a PTFE nut and bolt. Shaft is supplied complete with PTFE nut and bolt. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2078.* US Patent Number 5,326,167
Electron Microscopy Sciences Lower Drive Wheel Bushing Assembly for Model 865 Diamond Band Saw
For use with Model 865 Daimond Band Saw (50182-65).
Sigma Aldrich Fine Chemicals Biosciences PTfE stirrer shaft shaft d1EA
Stirring shaft with steel core. Use with PTfE stirrer guides and for applications which do not require a guide. Unbreakable scratch resistant and usable up to 280C.
Chemglass Life Sciences 31mm Rotary Bearing Taper Lock, Ferrule, Nylon
31mm Rotary Bearing Taper Lock, Ferrule, Nylon
Chemglass Life Sciences Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60° Impeller Angle
Agitator, PTFE, 10mm, Four Blade, 75mm Dia, Fits Shaft Size 10mm, 60¿ Impeller Angle. Agitators are made entirely of PTFE and glass filled PTFE and are for use with 10mm OD stirrer shaft CG-2075-B. Available in 45¿, 60¿ and 90¿ impeller angles. The 45¿ and 60¿ impellers are set up to stir downwards in a clockwise direction and upwards when rotated counter-clockwise. Agitator hub is open so that it can be positioned anywhere along the stirrer shaft and locks onto shaft with a glass filled TFE screw.
Pipette Supplies, Inc. Rainin Pipet-Lite / Pipet-Lite XLS Shaft Coupling Nut, Single Channel Pipettes, 2µL-1000µL
Shaft coupling nut for the following pipettes:Pipet-Lite, Single Channel, L, SL, 2μL – 1000µLPipet-Lite XLS, Single Channel, XLS, 2μL – 1000µL