Electron Microscopes
Thermo Scientific™ VitroEase™ Training Kit
The Thermo Scientific™ VitroEase™ Cryo-EM Training Kit provides a complete solution that includes detailed instructions for the successful preparation of grids for cryo-electron microscopy single particle analysis.
Ted Pella Inc 45º SEM Mount, 10/pack
45º SEM Mount Ø12.7mm for FEI, TESCAN, ZEISS (also for Philips, LEO, Cambridge, AMRAY, Leica, CamScan, ETEC) SEMs. Aluminum, grooved edge, 7.8mm pin height.
Mitegen Autogrid Rings & C-clips By Nanosoft For Cryo-EM & Autoloader Systems, 100 Rings & 100 C-clips Pack
Autogrid Rings and C-clips by Nanosoft provide a premium, functionally-equivalent solution for clipping grids in Thermo Fisher Scientific (TFS) cryo-EMs and autoloader systems. Manufactured using cutting-edge technology, ensuring consistent and reliable performance. They offer exceptional value as a high-quality, one-time use consumable. Extensive testing across numerous facilities confirms reliable operation without defects in autoloader or microscope functions. These C-clips are high-quality and fully compatible with both TFS autogrid rings and Nanosoft autogrid rings. The rings are also compatible with TFS C-clips. Both components are designed for seamless use with Nanosoft and TFS clipping stations and tools, optimizing your cryo-EM sample preparation workflow. This convenient 100-pack includes 100 Autogrid Rings and 100 C-clips.
Leica Biosystems Active Carbon Filter 14048858136
Active Carbon Filter 14048858136 is an activated carbon cartridge supplied by Leica Biosystems for use in compatible laboratory staining and tissue-processing instruments. The cartridge helps control solvent odors and capture volatile compounds produced during staining workflows, and is sold as a replaceable consumable.
- Contains high-grade activated carbon.
- Adsorbs organic and inorganic vapors and solvents.
- Reduces instrument odors and emissions.
- Replaceable cartridge designed for easy installation.
- Solid, non-flammable material stable under normal conditions.
Cytiva Centrassette P holder including torque wrench and socket
Centrassette P holder including torque wrench and socket
Ted Pella Inc COPPER TAPE COND.SGL ADH.
Copper Conductive Tape, 6.3mm W x 16.4m L; 1/4 in. x 18yd, Core diameter is 76mm, Foil Thickness: 0.04mm, Total Thickness: 0.07mm, Resistance through Adhesive: 0.005ohm
Ted Pella Inc PELCO Tabs™, Carbon Conductive Tabs, 6mm OD
The simplicity of application and smooth, clean surfaces of PELCO Tabs™ Carbon Conductive Tabs are a significant improvement compared to many of the other common adhesives that have been used in SEM mounting. Both tab sides have a thick conductive adhesive (conductive inner tab is 35µm and the adhesive is 45µm on each side for a total thickness of 125µm [5 mils]) with a liner on both sides, a transparent liner and white liner respectively. They are ready for immediate use. The top protective liner does not have to be removed until the sample is ready to be mounted. This reduces possible contamination. Outgassing is negligible.
Electron Microscopy Sciences Carbon Support Film 3-4 nm thick on Square 300 mesh Copper Grid
A thin film of pure carbon. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Ultra-thin thickness is 3 to 4 nm.
Grid: Copper
Ted Pella Inc Carbon Type-A, 300 mesh, Copper, 25/pk
Carbon Type-A: Carbon support films with a removable Formvar on the opposite side of the grid. When the Formvar is removed, by dipping in solvent, a pure carbon film remains. (Note: The Ultrathin Carbon Film on a Lacey Carbon Support Film, Prod. No. 01824, has no Formvar backing.) These films are stable under all EM operating conditions and are for use where the presence of a Formvar layer cannot be tolerated. Pure carbon films tend to be more delicate than those with a Formvar backing and require more delicate handling during specimen preparation than most other support films.
Electron Microscopy Sciences Grid Boxes for use in routine grid handling and long term storage. Capable of storing 3.05 mm or 2.3 mm diameter grids, 25 column card.
Our grid boxes are for use in routine grid handling and long term storage. Each diamond will hold Stores 3.05 mm or 2.3 mm diameter grids. The two side features allow easier handling during specimen removal. Grid can be catalogued using the alpha numeric index on the side and the durable 25 column card for record keeping. EMS25 is a small grid storage box, designed as a low alternative to larger grid boxes.
Buehler EpoThin™ 2 mix ratio 2:1 by volume, Hardener 16oz [0.48L]
EpoThin™ 2 mix ratio 2:1 by volume, Hardener 16oz [0.48L]