Bioprocess System Accessories
Bellco Glass, Inc. Low profile 2-port assembly for vertical low profile vessels 45mm 2-port assembly for low profile 3l vessels Seamed welded ¿ electropolish 316l stainless steel material 32ra finish or better All tubes; .250"od x .152"id Siphon tube (lo
Low profile 2-port assembly for vertical low profile vessels 45mm 2-port assembly for low profile 3l vessels Seamed welded ¿ electropolish 316l stainless steel material 32ra finish or better All tubes; .250"od x .152"id Siphon tube (lo
Bellco Glass, Inc. Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in re-flux or distillation operations.
Used to generate a localized cold surface on the exterior of the finger. Commonly used for sublimation, and can also be used in re-flux or distillation operations.
Bellco Glass, Inc. 45mm 3-port assembly for 1964 style over head drive vessels, 36l Sealed weld ¿ electropolish finish Supplied with 45mm s/cap & white silicone liner316l SST material, ra 32 finish or better 1 ¿ siphon tube; 18" long 1 ¿ fill tube; 3 3/16"
45mm 3-port assembly for 1964 style over head drive vessels, 36l Sealed weld ¿ electropolish finish Supplied with 45mm s/cap & white silicone liner316l SST material, ra 32 finish or better 1 ¿ siphon tube; 18" long 1 ¿ fill tube; 3 3/16"
Bellco Glass, Inc. Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 1
Heating blankets are designed to be used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature. Male iec connector for use with temperature controllers Heating at 5 watts/sq.in. Flask size: 1
Foxx Life Sciences EZBio MTO Single Use (SUT) Cap Assembly, 38-430 VersaCap, PP, C-Flex Tubing, Vented w/ Diptube, Plug, for 1000 mL (1L) Bottle, Foxx or Nalgene Bottles, Sterile, 20/CS
Made To Order MTO Sterile Single-Use Polypropylene Cap Assembly for 1000mL (1L) Bottles with Tubing and Vent Filters are perfect for fluid transfer and storage. This EZBio MTO Single Use VersaCap assembly features a 2-port 38-430 Cap with 1/8” ID (3.2mm) x ¼” OD (6.4mm) C-Flex® TPE Tubing and diptube. This cap assembly features a hose barb plug that keeps the line closed until it is removed for use. Additionally, all cap assemblies include a 0.2µm Hydrophobic PTFE Vent Filter that allows for ventilation while preventing media from escaping in the event of a spill. All EZBio "MTO" Single Use Cap Assemblies also include a ratchet style pinch clamp that allows the user to control flow into their container or close off the line entirely. The EZBio "MTO" Cap Assembly is the perfect option to phase out costly stainless steel apparatuses that are expensive to clean and validate. USP Class VI components, Gamma Irradiated in USA.
Chemglass Life Sciences Sampling Tube, Reduced Diameter, M6 Thread, 1/8"OD Tubing, for 2-5L Bioreactors, 210mm Max Immersion Length
Sampling tube with a reduced diameter which requires a smaller amount of sample to be drawn from the reactor.Tubing is 1/8 inch OD.Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc.Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences 12mm Probe Holder, Fixed Height, M27 Thread
12mm Probe Holder, Fixed Height, M27 Thread. Probe holders for 12mm probes. These are non-height adjustable.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences 12mm Probe Holder, Fixed Height, G3/4 Thread
12mm Probe Holder, Fixed Height, G3/4 Thread. Probe holders for 12mm probes. These are non-height adjustable.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Air Aeration Tube for 15L Bio Reactors
Air Aeration Tube for 15L Bio Reactors. This tube is to be used when high gas flow rates are required. The sparger pipe extends to the bottom of the vessel and terminates just below the impellers on the stirrer shaft. This allows bubbles coming out of the sparger to rise up into the impellers where they are broken up for improved oxygen transfer.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences 9" Sample Line Assembly, L/S Platinum Cured Silicone Pump Tubing, 1/8" ID x 1/4" OD Size 16
Reduces set up time and minimizes labor cost.Sample line assembly is individually bagged and ready to use.Swabable valvecan be used for sampling bioreactors.Manufactured with platinum cured siliconetubing.For sterile applications the Sampler can be safely autoclaved.
Chemglass Life Sciences Harvest Tube, M27, for 15L Bio Reactors
Harvest Tube, M27, for 15L Bio Reactors. Harvest tubes mount into the outer M10 or M27 thread on the standard head plate. The design has the tapered tip within 2mm of the bottom of the bio reaction vessel to allow complete harvesting of all cells. The 15 Liter size has an M27 thread with 1/2 tubing for quicker harvest.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Silicone Rubber Septum
Silicone Rubber Septum. Replacement Septa for CLS138010 septum holder.
Chemglass Life Sciences Headplate for 3L Bio Reactors, 18 Ports
This adapter can be used to add fluids or gases to the bio reactor.The portion of the adapter that is within the reactor has a short drip tip tube that can accept tubing to reach further into the listed capacity reactor.Stainless steel components manufactured from 316L with an electropolished surface finish of 20Ra or better.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc.Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.
Chemglass Life Sciences Adapter, Air Inlet/Outlet, M10
Adapter, Air Inlet/Outlet, M10. Adapter can be used as a gas outlet pipe in lieu of a condenser in applications where the aeration rate or temperature is low or for short term batch applications. More often, this pipe is used to provide overlay aeration.Like-for-like replacement parts for Applikon Biotechnology and Broadley-James brands of bioreactors.Applikon is a registered trademark of Applikon Biotechnology, Inc. Broadley-James and Broadley-James Corporation are registered trademarks of Broadley-James Corporation.