Chromatography Autosampler Vial Caps Only
Electron Microscopy Sciences Tripod Polisher Screw Clamp "L" Bracket
Used with Pyrex Insert for Wedge Polishing (#50116-60), SEM Stub (#50116-65) or Wedge Polishing Mount (#50116-61). Can be used for polishing edge of sample to area for SEM or preparation for final wedge polishing for TEM.
Bellco Glass, Inc. Designed for standard screw thread vials. Available with or without septa. Easy on and easy off convenience with a twist of the cap that produces an evaporation proof seal. Larger opening provides a increased target area for needle penetration.
Designed for standard screw thread vials. Available with or without septa. Easy on and easy off convenience with a twist of the cap that produces an evaporation proof seal. Larger opening provides a increased target area for needle penetration.
Bellco Glass, Inc. Used for snap thread vials. Caps may be snapped on and off by hand which eliminated the need for a metal crimping and decapping tool. Size: 11mm Septa material: ptfe
Used for snap thread vials. Caps may be snapped on and off by hand which eliminated the need for a metal crimping and decapping tool. Size: 11mm Septa material: ptfe
Bellco Glass, Inc. Used for snap thread vials. Caps may be snapped on and off by hand which eliminated the need for a metal crimping and decapping tool. Size: 11mm Septa material: ptfe
Used for snap thread vials. Caps may be snapped on and off by hand which eliminated the need for a metal crimping and decapping tool. Size: 11mm Septa material: ptfe
Bellco Glass, Inc. Designed for standard screw thread vials. Available with or without septa. Size: 8-425 Color: red
Designed for standard screw thread vials. Available with or without septa. Size: 8-425 Color: red
Bellco Glass, Inc. Larger opening provides increased target area for needle penetration. Size: 11mm Septa material: ptfe silicone Seal color: silver
Larger opening provides increased target area for needle penetration. Size: 11mm Septa material: ptfe silicone Seal color: silver
Bellco Glass, Inc. Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Size: 11mm Septa: clear ptfe or red rubber
Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Size: 11mm Septa: clear ptfe or red rubber
Leap PAL Parts Pal Screw Cap 18Mm Septa 2.0
PAL System Screw Re-Cap 10CV and 20CV designed for the PAL Autosampler. ND18 Magnetic PTFE Metal Coating for optimized screw and sealing performance Silicone/PTFE Septa 2.0mm Pk of 100 pcs
Leap PAL Parts Pal Screw Cap 24Mm
PAL System Screw Cap 40CV designed for the PAL Autosampler. ND24 Silicone/PTFE Septa 3.2mm Pk of 100 pcs
Electron Microscopy Sciences MacroTubes™ with Snap-Caps, Yellow
The 5 ml MacroTubes thave all conveniences of standard 1.5 ml tubes but are scaled up for larger volumes. The attached cap provides a tight, leak proof seal from -86 deg C to +80 deg C and can be opened or closed with one hand. The tubes are made of maximum clarity, low-binding virgin polypropylene and are certified RNase and DNase free.
Tubes are sized to be compatible with all Benchmark (USA) and standard German-designed equipment. The 16 mm tube diameter is identical to the diameter of 15 ml tubes, ensuring compatibility.
The potential contamination of pipettor shafts is greatly reduced because the 56 mm total tube length (vs. 120 mm for 15 ml tubes) is short enough for standard 1 ml or 5 ml tips to reach the tube's conical bottom. Feature dual graduations at every 0.2 ml and 0.5 ml.
Color: Yellow
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with an Open Hole. Aluminum Silver Caps. Septa are sold separately. For use with 20mm Crimp Top Headspace vials. 100/PK.
Septa are sold separately and must be inserted manually.
Microsolv Technology Corporation Caps, Headspace, Crimp Top, with Grey Butyl Rubber / Transparent PTFE Septa, fitted in Steel, Magnetic, Gold Caps with 8mm center holes. For use with 20mm Crimp Top Headspace Vials. 1000/CS.
Butyl Rubber Septa that is laminated with PTFE and is 55⁰ Shore A (hardness) and is 3.0mm thick. Temperature resistant from -40C to 120C.
Microsolv Technology Corporation Caps, Crimp Top, with PTFE Septa, fitted in aluminum, Silver Caps. For use with 11mm Crimp or Snap Top, 12x32mm autosampler vials. 100/PK.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal. Buying in case quantities can save money and time.
Microsolv Technology Corporation Caps, Snap Top, with White PTFE Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
This PTFE (only) Septa is for single injections or non-volatile samples as it will not reseal.
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Caps, Screw Top, with Silicone Rubber / PTFE, low durometer Septa, fitted in "knurled", polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.