Microplate Sealing Films and Tapes
Electron Microscopy Sciences Sealing Labels PetriSEAL, Red, 0.50" 108 FT
Ideal sealing tapes for large containers and bottles to cover wider gaps ensuring a tight seal. They stretch, conform, and seal the irregular perimeter of microplates or Petri dishes. Resist most solvents and caustic agents. Seal remains flexible in moderate freezer temperatures and withstands intermittent exposure to 100 degree C.
Color: Red
Width: 0.50"
Electron Microscopy Sciences Titer-Tops, 6" X 3.25"
Titer-Tops prevents sample evaporation, well to well contamination, external contamination and sample spillage and are made from 4.4 mil polyethylene film with an FDA approved non cytotoxic acrylic adhesive. Each pre-cut rectangular sheet is 6"x3.25" with a paper liner. The center section of the liner measures 5"x3.25" and once it is peeled off it leaves two hand-grip extension tabs on the two ends allowing for easy application of the Titer-Top to the plate.
Titer-tops are chemically resistant and thermally stable and the acrylic adhesive is waterproof, solvent resistant, and compatible with all plastic microtiter plates. They will stay in place even when exposed to 100% humidity and temperatures ranging from -40 degree C to 100 degree C. They are easily pierced with a micropipette tip to provide access to sample wells. Gamma sterile.
Electron Microscopy Sciences Sealing Labels ContainerSEAL, Red, 0.75" x 108' 108 FT
Ideal sealing tapes for large containers and bottles to cover wider gaps ensuring a tight seal. They stretch, conform, and seal the irregular perimeter of microplates or Petri dishes. Resist most solvents and caustic agents. Seal remains flexible in moderate freezer temperatures and withstands intermittent exposure to 100 degree C.
Color: Red
Width: 0.75" x 108'
Bio Rad Laboratories MICROSEAL A FILM 50/PK
Microseal A Film; Bio-Rad; Compliant inner layer designed to seal tightly during PCR and release smoothly; Microseal A film not designed for optical use; Do not use this film in real-time PCR detection systems; Package of 50 seals
Alkali Scientific SilverSeal™ Aluminum Sealing Film
A 36 µm soft non-permeable aluminum foil sealing film with 28 µm layer of strong medical-grade acrylic adhesive, SilverSeal™ sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Each sealing film measures 82.6 x 146.1 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.4 mm. Compared to other aluminum foils, SilverSeal™ has less tendency to roll back or itself when removing the backing paper and conforms well to the plate during application. easily pierceable with single or multichannel pipettors and robotic probes heat and cold resistant, recommended for temperatures from -80 °C to +120 °C certified DNase-, RNase-, and nucleic-acid-free excellent barrier properties, virtually no sample evaporation or drying. SF3ML is ideal for use with 96-well raised-rim and non-skirted PCR plates.
Ace Glass, Inc. 7MM GRADED SEALS 7MM GRADED SEALS
7mm quartz graded seals for connecting Pyrex or Kimax borosilicate glass to Quartz glass. Quartz length is 7.6cm, and borosilicate length is 10.2cm.
Thomas Scientific Zone-Free Film
Adhesive-free zones above wells prevent adhesive from interfering with samples Inert and chemical-resistant 90% adhesive-free polyethylene film Sterile and non-sterile styles available Functional temperature range of -40°C to 90°C Zone-Free™ films feature a 70 um adhesive -free polyethylene top layer with a 96-well patterned inert white PP/adhesive sublayer. This combination provides an 90% adhesive-free zone over each well while ensuring a secure seal around the rim and between wells while allowing for direct sample recovery with single or multi-channel pipettors or robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe to minimize the amount of adhesive that comes into contact with the sample. Transparent zones and two end tabs allow easy and accurate positioning of the film to the plate. The end tab backing can be removed and the film applied around and over both edges of the plate for a more secure seal. Dimensions a
Sigma Aldrich Fine Chemicals Biosciences ThermalSeal 2R sealing fil
These improved films for classic thermal cycling applications consist of a 50 mum polyester film with a 41 mum layer of acrylic adhesive. Compared to the original ThermalSeal(R) films ThermalSeal(R) 2 films offer better adhesion reduced evaporation longer end tabs for easier handling and less tendency to tear during removal from the plate. Each sealing film measures 79.4 x 139.7 mm and offers sufficient sealing area for all PCR plates. Length between the perforations with end tabs removed is 125.1 mm. ThermalSeal 2 sealing films are not pierceable.
Hampton Research ClearSeal Film 100 pack
ClearSeal Film fits all SBS format 96 well plates. Minimal evaporation, minimal cross-well contamination, easy to handle, and optically clear. Single coated, 2 mil (0.05 mm), optically clear polyolefin film with pressure-sensitive silicone-based adhesive. Supplied as a 141 mm x 78 mm film with white polyester release liner (backing). Actual seal area after end tabs removed is 120 x 78 mm Seals well to polypropylene, polystyrene, and polycarbonate plates. Compatible with aqueous and organic solvents. Suitable for use between -70 and 110°C. For best seal, the plate must be sealed with the Film Sealing Paddle HR4-513. ClearSeal Film has a limited shelf life. Must be used before expiration date printed on box.
Pacer Global LLC Breathable Plate Seals, Pierceable, Self-Adhesive Film, Sterile, 100/PK - MLS-SBPS-100
Breathable Plate Seals, Pierceable, Self-Adhesive Film, Sterile, 100/PK
Alkali Scientific SealSafe Titan™ Sealing Film Starter Kit, Titan Dispenser + 2 Rolls of SealSafe Film, 100 Sheets/Roll
SealSafe's dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination. Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film. Each sheet is separated by an adhesive-free, perforated, color-coded green band.
Alkali Scientific X-Punch™ Pierceable Sealing Film, 100/pk
X-Punch™ pierceable sealing film is designed for short-term processing and storage of samples that require multiple access to wells by pipet tips or robotic probes. A pre-cut “X” over each well creates bendable flaps that provide sample access without coring or adhesive fouling of tips or probes. X-Punch has printed circles aid in the alignment of the film to the plate. It also has printed alphanumerics identify each well of a 96-well plate. It is piercable and reseals after piercing for continued sample protection.
Research Products International Corp Aeraseal Sealing Film for Culture Plates, Non-Sterile, 82 x 126 mm, 100 per Package
This adhesive film provides a leak tight seal on culture plates or 96 well assay plates. Unique micro-porous design allows uniform air and CO2 exchange between wells for optimum cell growth or bacterial cultivation. AeraSeal film minimizes cross-contamination between wells and reduces sample evaporation. Film can be easily pierced for sample recovery using a single or multi-channel pipettor.
Medical grade, non-cytotoxic adhesive has a thermal stability range of -20C to 80C. Removable tabs allow quick and easy positioning of film.
AeraSeal is a Trademark of Excel Scientific, Inc.
Removable, not reusable.
Research Products International Corp Petri-Seal, Red, 1/2 Inch x 108 Feet
Ideal sealing tape for petri dishes and micro-well plates. Tape stretches and conforms to ensure a tight seal. Designed to prevent water vapor loss, reduce rate of gas exchange and prevent entry of contaminants. Tape is easily removed from most surfaces without leaving a residue. Elastomeric plastic withstands continuous exposure from -40°C to +77°C (with intermittent exposure to 100°C). Resistant to most organic solvents.