Tubing Connectors and Fittings
Chemglass Life Sciences Adapter, Flow Control, Straight, 2mm Stpk, 14/20 Inner Joint
Adapter, Flow Control, Straight, 2mm Stpk, 14/20 Inner Joint. Used to regulate the flow of gases or liquids into reaction systems. Stopcock has a bore of 2mm and is supplied complete with a CG-423 retaining clip. Hose connection has an O.D. of 8mm at the middle serration.
Chemglass Life Sciences Adapter, Outer Luer to 14/20 Inner
Adapter, Outer Luer to 14/20 Inner. Adapter has an outer luer joint that provides a convenient way to connect solid phase extraction (SPE) cartridges, tubes or syringes to a standard taper inner joint. The adapter provides for easier sample concentration and clean-up while reducing the chances of cross-contamination. Hose connection is 10mm OD at the largest serration.
Chemglass Life Sciences Adapter, Tooled Pluro Stopper Flare to 20-400 GPI Thread
Adapter, Tooled Pluro Stopper Flare to 20-400 GPI Thread. Adapter with tooled flare top is used for reduced pressure filtration with plain stem Buchner funnels. Flare accepts a #2 Pluro Stopper. ADAPTER IS NOT SUPPLIED WITH PLURO STOPPER UNLESS PURCHASED AS A KIT. SEE CG-1401 FOR STOPPER. Adapters are used for filtration directly into vials. There are three top configurations, with the bottom of all adapters having a 20-400 GPI thread for connection to vials using a CG-1318 Threaded Connector. Design incorporates a drip tube sealed within thread to prevent breakage and are supplied with a 2-1/2” PTFE delivery stem. Hose connection is 10mm OD at the largest serration. ADAPTERS ARE SUPPLIED WITH PTFE DELIVERY STEM.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Style ''B'', 105, 19/22 Joint Size
Adapter, Vacuum Take-Off, Style 'B', 105, 19/22 Joint Size. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105 angle for use in vacuum distillation. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Adapter, Vacuum Take-Off, Vertical, 29/42 Joint Size
Adapter, Vacuum Take-Off, Vertical, 29/42 Joint Size. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.
Chemglass Life Sciences Adapter, Distilling Trap, Kjeldahl, 29/42 Joint Size
Adapter, Distilling Trap, Kjeldahl, 29/42 Joint Size. Adapter is placed above flask to prevent carry-over of reactions which have a tendency to foam. With top standard taper outer and lower inner joints, both being the same size.
INDIANA FLUID SYSTEMS TECHNOLOGIES SS FITTING UNION ELBOW 1/4IN
NC2831574 SS FITTING UNION ELBOW 1/4IN
Chemglass Life Sciences Style "C" Gas Inlet Adapter, 45/50
Gas inlet adapter with 45/50 inner joint, is used for connection of the gas source to the lower reservoir. Inlet connection is 1/2 Swagelok tubing for use with CG-1975-20 compression fitting. Adapter is available in 3 styles.Style "C": Adapter permits the gas to enter the flask above the sub-surface of the scrubbing fluid. When using this adapter, all of the gas to liquid interaction takes place in the column.
COLDER PRODUCTS COMPANY 3/8 Hose Barb Non-Valved Coupling Body With Lock - Pack of 250
3/8 Hose Barb Non-Valved Coupling Body With Lock - Pack of 250
COLDER PRODUCTS COMPANY CPC HFC35 Polysulfone Hose Barb Coupling Bodies In-line coupling Free floating EPDM seal options Vacuum to 125 psi 8 6 bar Valve Spring 316 Stainless Steel
CPC HFC35 Polysulfone Hose Barb Coupling Bodies In-line coupling Free floating EPDM seal options Vacuum to 125 psi 8 6 bar Valve Spring 316 Stainless Steel
COLDER PRODUCTS COMPANY FEMALE BODY 1/4 ID HB 25/PK
CPC Plastic Connectors Couplings and Fittings Buna-N Seal Description 1 8 L x 0 94 in H (45 7 x 23 mm) Hose Barb Non-Valved In-line Coupling Body 0 25 in flow coupler x 0 25 in hose barb White For Use With 6 4mm Includes Plastic connector Overall Length 1 8 in 45 7 mm
COLDER PRODUCTS COMPANY 1/2 MNPT Elbow Coupler with EPDM O-Rings and Hastelloy C Spring
1/2 MNPT Elbow Coupler with EPDM O-Rings and Hastelloy C Spring
COLDER PRODUCTS COMPANY 1/4 Hose Barb Genderless AseptiQuik S Connector High Temperature
1/4 Hose Barb Genderless AseptiQuik S Connector High Temperature
COLDER PRODUCTS COMPANY COUPLER BODY 50/PK
CPC SMC Series Subminiature Quick-Disconnect Coupling Bodies and Inserts For Use With 1 6mm Polypropylene Hose Barb Non-valved Coupling Insert Autoclavable Not Autoclavable White Overall Length 0 75 in 19 mm Height 0 48 in 12 1 mm Maximum Pressure 100 psi