HPLC Columns
Tosoh Bioscience LLC TSKgel UP-SW Aggregate, 3 um, 4.6 mm x 15 cm
The latest addition to the UP-SW series of silica-based size exclusion chromatography (SEC) columns, are specifically designed to facilitate the analysis of mAb aggregates, high molecular weight (MW) proteins and nucleic acids. These columns are 3 um, 30 nm pore size SEC analytical columns that have been designed with a higher exclusion limit than other TSKgel UP-SW columns.
Vicam FumoniTest Columns, Fluorometer & HPLC (25/box)
FumoniTest Columns, Fluorometer & HPLC (25/box)
Waters Corp XSelect Method Validation Kit, C18, 5 μm, 4.6 mm X 150 mm
The HSS C18 packing is the most stable commercially available bonded phase, designed to avoid peak shape issues common with older stationary phases. It relies on steric protection and endcapping for stability at low pH. These HPLC columns are fully scalable and transferable to UPLC separations.
- Chemistry: C18
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 1 to 8
- Maximum pressure: 6000 psi (415 Bar)
- Endcapped
- Low silanol activity
- Spherical particle shape
- Particle size: 5 μm
- Pore size: 100 Å
- Format: Method validation kit
- Surface area: 230
- System: HPLC
- Particle technology: HSS
- USP classification: L1
- Inner diameter: 4.6 mm
- Length: 150 mm
- Carbon load: 15%
- Units per package: 3
Waters Corp Waters Method Validation Kit, C18, 3.5 μm, 100 Å
HSS C18 SB columns are designed for low pH separations involving complex mixtures of basic and non-basic compounds. They provide an alternative analyte selectivity compared to most modern, high-coverage, fully endcapped C18 stationary phases. These HSS C18 SB HPLC columns are fully scalable and transferable to UPLC separations.
- Chemistry: C18
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8
- Temperature limits: 45 °C
- Maximum pressure: 6000 psi (415 Bar)
- Endcapped: No
- Bonding technology: C18 SB
- Silanol activity: Medium
- Particle shape: Spherical
- Particle size: 3.5 μm
- Pore size: 100 Å
- Format: Method validation kit
- Inner diameter: 4.6 mm
- Length: 150 mm
- Units per package: 3 pk
Waters Corp Waters XSelect HSS T3 Method Validation Kit, 100Å, 3.5 μm, 3 mm × 150 mm, 3/pk
The trifunctional alkyl C18 bonded phase used for the HSS T3 sorbents is compatible with 100% aqueous mobile phase and provides ultra-low MS bleed, while promoting superior polar compound retention. HSS T3 HPLC columns are fully scalable and transferable to UPLC separations.
- C18 chemistry
- Reversed phase separation mode
- Silica particle substrate
- pH range of 2 to 8
- Temperature limits up to 45°C
- Maximum pressure of 6000 psi (415 Bar)
- Endcapped
- T3 bonding technology
- Medium silanol activity
- Spherical particle shape
- 3.5 μm particle size
- 100 Å pore size
- Method validation kit format
- 230 surface area
- HPLC system compatible
- HSS particle technology
- L1 USP classification
- 3 mm inner diameter
- 150 mm length
- 11% carbon load
- 3 units per package
Waters Corp Viridis Column, CSH Fluoro-Phenyl, 1.7 μm, 3 mm x 100 mm
These columns are designed and tested for the ACQUITY UPC2 system, demonstrating high efficiency and resolution. The reduction and control of surface silanol activity on particles delivers, under SFC conditions, excellent peak shapes — without the use of mobile-phase additives — even for well-retained basic achiral compounds.
- High efficiency and resolution
- Reduced and controlled surface silanol activity on particles
- Delivers excellent peak shapes without the need for mobile-phase additives
- Suitable for well-retained basic achiral compounds
Waters Corp Waters XBridge BEH HILIC Column, 2.5 μm, 4.6 x 150 mm
XBridge BEH HILIC columns are part of the eXtended Performance (XP) 2.5 μm series. Designed for seamless transition between HPLC and UPLC™ Technology, they are compatible with any LC system, offering flexibility and improved productivity at intermediate backpressures.
- Enhances transition strategy between HPLC and UPLC™ technology.
- Compatible with all LC systems (HPLC, UHPLC, UPLC) for improved productivity.
- Offers diverse selectivity with multiple particle substrates and chemistries.
- Provides 40% lower backpressure than 1.7 μm columns, ensuring superior performance and throughput.
- Enables rapid method optimization and future-proof method transfer.
- Utilizes advanced packing technology for exceptional performance, loading capacity, and for complex mixture analysis.
Waters Corp XSelect HSS C18 Method Validation Kit, 100Å, 2.5 µm, 4.6 mm X 150 mm, 3/pk
This method validation kit consists of three XSelect HSS C18 columns packed with three different batches of sorbent. XSelect HSS C18 is a general purpose, high performance C18 chemistry with exceptional retention and peak shape for all compounds. Packed in ultra-low dispersion hardware, 2.5 µm eXtended Performance [XP] columns enable exceptional separation performance, robustness and throughput for HPLC assays while enabling a seamless transition path toward UPLC adoption.
Waters Corp WATERS CORPORATION XSelect HSS T3 Method Validation Kit, 2.5 μm, 100 Å, 4.6 mm, 150 mm
This method validation kit includes three columns packed with different sorbent batches. They feature a low-coverage C18 phase compatible with 100% aqueous mobile phases, ideal for separating polar and non-polar compounds. These columns offer ultra-low MS bleed and are fully scalable and transferable to UPLC separations. Packed in ultra-low dispersion hardware, the 2.5 μm eXtended Performance [XP] columns ensure exceptional HPLC performance, robustness, and throughput, facilitating a smooth transition to UPLC.
- Low-coverage C18 phase
- Compatible with 100% aqueous mobile phase
- Suitable for polar and non-polar compound separations
- Ultra-low MS bleed
- Fully scalable and transferable to UPLC
- Ultra-low dispersion hardware
- 2.5 μm XP columns
- Exceptional HPLC performance, robustness, and throughput
- Seamless transition to UPLC adoption
Waters Corp XTerra Phenyl Column, 125Å, 3.5 µm, 4.6 mm X 150 mm, 1/pk
XTerra Phenyl columns are hybrid-based, reversed-phase columns that incorporate phenyl ligand functionality. These first generation columns provide superior pH stability compared to a silica-based column.