Animal Surgical Equipment Accessories
Cosmo Bio Usa Inc CARD HyperOva, 5 x 600ul
CARD HyperOva is an ultra-superovulation reagent that induces ovulation at higher efficiency when compared with the conventional superovulation induction method (PMSG-hCG method). Following the conventional method, we were only able to obtain approximately 20 ova per mouse (C57BL/6J) on average; using CARD HyperOva, however, we can obtain as many as 3-4 times more ova.
Complete tubing set for Instech ABS2, 020 silicone, no low loss. For automated blood sampling from rats.
The Instech ABS2/TS020NL is a complete tubing set designed for the ABS2™ Automated Blood Sampler. Built from 020-size silicone tubing in a no–low-loss configuration, it supports accurate automated blood sampling by maintaining reliable fluid flow and minimizing dead volume. This tubing set is optimized for rat studies and integrates directly with ABS2 peristaltic pump pathways for consistent sampling performance.
Features
- Tubing Type: 020 silicone
- Configuration: No low loss
- Application: Automated blood sampling from rats
- Compatibility: ABS2 Automated Blood Sampler
- Function: Maintains steady fluid flow for sampling and IV fluid return
- Quantity: 1 complete tubing set
Instech Luer stub, 23ga (orange) x 0.5in (12mm), non-sterile, pack of 100
The Instech LS23 is a non‑sterile 23‑gauge orange luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS23 is supplied non‑sterile in a pack of 100 for routine infusion and sampling workflows.
Features
- Gauge: 23ga (orange hub)
- Length: 0.5 inch (12 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Instech Low-flow peristaltic pump, 900:1 motor delivers flow rates from 8-2400l/min.
P720 Peristaltic Pumps
Instech P720 peristaltic pumps deliver the low flow rates of syringe pumps without the limits on delivered volume. They are ideal for tissue perfusion and other low-flow laboratory applications.
The 900:1 motor delivers flow rates from 8-2400l/min depending on tube set size installed. Order tube sets separately. Universal power adapter included.
Features
- Precise. Precision-machined pump heads, Swiss-made motor and gearhead assemblies, linear speed control, and a range of tube sizes deliver flow rates from 0.8 µL/min to 18 ml/min (0.05 to 1100 ml/hour) with an accuracy better than ±5%.
- Small. The pumps fit in the palm of your hand and weigh about one pound.
- Versatile. Pre-assembled tube sets are available with your choice of three tubing materials, nine types of connectors, and one or two channels.
Euthanex EZ-251A Filter Connection Kit, 6 feet of ID hose with connectors and clamps for connection to charcoal filter canister.
EZ-251A Filter Connection Kit, 6 feet of "" ID hose with connectors and clamps for connection to charcoal filter canister.
Instech Stainless steel catheter / tubing coupler, 25ga x 10mm. Nonsterile. Package of 100.
The Instech SC25/10 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 25ga and 10mm in length, it provides a secure, low‑dead‑volume junction ideal for small‑animal infusion and sampling procedures. Its rounded edges help prevent tubing damage, and it is supplied non‑sterile in packs of 100 for laboratory use.
Features
- 25ga stainless steel straight catheter coupler
- 10mm length for compact catheter‑to‑tubing connections
- Rounded edges to minimize tubing wear
- Non‑sterile; packaged in sets of 100
- Connects implanted catheters to external infusion lines
Instech Stainless steel catheter / tubing coupler, 22ga x 15mm. Nonsterile. Package of 100.
The Instech SC22/15 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 22ga and 15mm in length, it provides a secure, low‑dead‑volume junction for reliable fluid transfer in rodent infusion and sampling studies. Its rounded edges help prevent tubing damage, and it is supplied non‑sterile in packs of 100 for laboratory use.
Features
- 22ga stainless steel straight catheter coupler
- 15mm length for secure catheter‑to‑tubing connection
- Rounded edges minimize risk of tubing damage
- Non‑sterile; supplied in packs of 100
- Connects implanted catheters to external infusion lines
Instech Stainless steel catheter / tubing coupler, 20ga x 15mm. Nonsterile. Package of 100.
The Instech SC20/15 is a stainless steel catheter coupler used to connect implanted catheters to external infusion tubing. Sized at 20ga and 15mm in length, it provides a secure, low‑dead‑volume junction for reliable fluid transfer in infusion or sampling setups. The rounded edges reduce the risk of tubing damage, and the couplers are supplied non‑sterile in packages of 100 for laboratory use.
Features
- 20ga stainless steel straight catheter coupler
- 15mm length for secure catheter‑to‑tubing connection
- Rounded edges to protect tubing during use
- Non‑sterile; packaged in sets of 100
- Used to connect catheters to external infusion lines
Instech Stainless steel catheter / tubing plug, 22ga x 12mm. Nonsterile. Package of 100.
The Instech SP22/12 is a stainless steel catheter plug used to seal externalized catheters prior to infusion or sampling procedures. Sized at 22ga and 12mm in length, it provides a secure, low‑dead‑volume closure that protects catheter patency and prevents fluid leakage. Its rounded edges help reduce tubing wear, and it is supplied non‑sterile in packs of 100 for laboratory infusion system assembly.
Features
- 22ga stainless steel catheter plug
- 12mm length for secure catheter sealing
- Rounded edges to minimize tubing damage
- Non‑sterile; packaged in sets of 100
- Used to close externalized catheters before infusion
Mating tether for Vascular Access Harness™ or Button for mice. 7in (18cm), polyurethane in fluid path. Compatible with Instech 25ga plastic swivels. For mouse infusion and blood sampling.
The Instech VAH62T is a sterile mouse tether designed for use with the Vascular Access Harness™ (VAH62AB series), providing a secure, low‑dead‑volume connection for infusion or blood sampling. Built to mate with 25ga low‑torque swivels, the 7in (18cm) spring tether protects the externalized catheter while allowing free movement during studies, ensuring smooth, aseptic connection to the harness port.
Features
- Sterile tether for mouse Vascular Access Harness™ systems
- 7in (18cm) spring tether length
- Compatible with 25ga low‑torque swivels
- Provides clean, low‑volume connection to harness port
- Supports mouse infusion and blood sampling workflows
- Protects externalized catheter while allowing mobility
IV bag spike and 30in extension set with pinch clamp ending in male luer. Connects saline bag to sampler tubing on Instech ABS1 and ABS2 automated blood samplers. Sterile.
The Instech ABS2/IVEXT is a sterile IV bag spike and 30in extension set designed to connect a saline bag to the sampler tubing on Automated Blood Samplers™ (ABS1™ and ABS2™). Its integrated pinch clamp and male luer fitting provide controlled flow adjustment and a secure connection for reliable IV fluid delivery during automated sampling workflows.
Features
- Sterile IV bag spike with 30in extension tubing
- Integrated pinch clamp for flow control
- Ends in male luer for secure sampler connection
- Interfaces with ABS1 and ABS2 sampler tubing
- Supports consistent IV fluid delivery during studies